To Heal or Not to Heal?: 1. The Effect of Pore Fluid Pressure on the Frictional Healing Behavior of Lithologies in Oklahoma

The competition between fault healing (i.e., re-strengthening) and fault loading determines the timing and magnitude of fault failure within the seismic cycle. Repeating earthquakes can give observational estimates of fault healing rates, however, it is difficult to link laboratory studies of frictional healing and observed healing rates from repeating earthquakes in part because of uncertainty in lithology at depth. Due to well-constrained and relatively simple geology, earthquakes in Oklahoma can be linked to the granitic basement rock and to the Arbuckle Group, which is primarily composed of dolomite at earthquake depths. Here, we conduct friction experiments to measure healing rates of the two earthquake-bearing lithologies at confining pressures representative of earthquake depths and pore pressures ranging from 0% to 80% of the confining pressure. We measure frictional healing by executing slide-hold-slide tests with hold times ranging from 3 s to 3000 s. The friction experiments on the Troy Granite indicate that pore fluid pressure does not greatly affect healing rate. On the other hand, the dolomite of the Arbuckle Group exhibits decreased healing with increased pore fluid pressure, with weakening at the highest pore pressure. We hypothesize that this is due to an increase in dissolution of dolomite at high pore pressures/low effective normal stress. These healing rates are used in the companion paper to understand the moment-recurrence time behavior of repeating earthquakes in Prague, Oklahoma. This work has implications for possible enhanced dissolution and weakening behavior of the Arbuckle Group during wastewater injection activities.