{"title":"基于铝蜂窝腔的带通选频面研究","authors":"Na Li;Yingguo Jiang;Ye Han","doi":"10.1109/LAWP.2025.3587792","DOIUrl":null,"url":null,"abstract":"This letter proposes an innovative sandwich frequency selective surface (FSS) that integrates the periodic hollow architecture of aluminum honeycomb with cavity resonance. First, the resonant characteristics of the hollow honeycomb cavities are investigated. A 33% cavity miniaturization can be achieved by converting cavity sidewall boundaries from perfect electric conductor to perfect magnetic conductor (PMC) conditions. Then, a slot structure located at the two boundaries of the honeycomb cavity is introduced to provide slot resonance and act as an equivalent PMC wall to excite the TM<sub>0,2/3,0</sub> mode of the cavity. Finally, a dual-pole bandpass FSS with a center frequency of 7.07 GHz is achieved, featuring a small thickness of 0.059<italic>λ</i><sub>0</sub>. The electromagnetic-mechanical properties of aluminum honeycomb-based FSS were fabricated and measured to validate the proposed design strategies. Mechanical tests revealed compressive strength exceeding 2.1 MPa with a density of 0.702 g/cm<sup>3</sup>, highlighting its lightweight and load-bearing advantages.","PeriodicalId":51059,"journal":{"name":"IEEE Antennas and Wireless Propagation Letters","volume":"24 9","pages":"3263-3267"},"PeriodicalIF":4.8000,"publicationDate":"2025-07-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Investigation on Bandpass Frequency Selective Surface Based on Aluminum Honeycomb Cavity\",\"authors\":\"Na Li;Yingguo Jiang;Ye Han\",\"doi\":\"10.1109/LAWP.2025.3587792\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This letter proposes an innovative sandwich frequency selective surface (FSS) that integrates the periodic hollow architecture of aluminum honeycomb with cavity resonance. First, the resonant characteristics of the hollow honeycomb cavities are investigated. A 33% cavity miniaturization can be achieved by converting cavity sidewall boundaries from perfect electric conductor to perfect magnetic conductor (PMC) conditions. Then, a slot structure located at the two boundaries of the honeycomb cavity is introduced to provide slot resonance and act as an equivalent PMC wall to excite the TM<sub>0,2/3,0</sub> mode of the cavity. Finally, a dual-pole bandpass FSS with a center frequency of 7.07 GHz is achieved, featuring a small thickness of 0.059<italic>λ</i><sub>0</sub>. The electromagnetic-mechanical properties of aluminum honeycomb-based FSS were fabricated and measured to validate the proposed design strategies. Mechanical tests revealed compressive strength exceeding 2.1 MPa with a density of 0.702 g/cm<sup>3</sup>, highlighting its lightweight and load-bearing advantages.\",\"PeriodicalId\":51059,\"journal\":{\"name\":\"IEEE Antennas and Wireless Propagation Letters\",\"volume\":\"24 9\",\"pages\":\"3263-3267\"},\"PeriodicalIF\":4.8000,\"publicationDate\":\"2025-07-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"IEEE Antennas and Wireless Propagation Letters\",\"FirstCategoryId\":\"94\",\"ListUrlMain\":\"https://ieeexplore.ieee.org/document/11077373/\",\"RegionNum\":2,\"RegionCategory\":\"计算机科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"IEEE Antennas and Wireless Propagation Letters","FirstCategoryId":"94","ListUrlMain":"https://ieeexplore.ieee.org/document/11077373/","RegionNum":2,"RegionCategory":"计算机科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
Investigation on Bandpass Frequency Selective Surface Based on Aluminum Honeycomb Cavity
This letter proposes an innovative sandwich frequency selective surface (FSS) that integrates the periodic hollow architecture of aluminum honeycomb with cavity resonance. First, the resonant characteristics of the hollow honeycomb cavities are investigated. A 33% cavity miniaturization can be achieved by converting cavity sidewall boundaries from perfect electric conductor to perfect magnetic conductor (PMC) conditions. Then, a slot structure located at the two boundaries of the honeycomb cavity is introduced to provide slot resonance and act as an equivalent PMC wall to excite the TM0,2/3,0 mode of the cavity. Finally, a dual-pole bandpass FSS with a center frequency of 7.07 GHz is achieved, featuring a small thickness of 0.059λ0. The electromagnetic-mechanical properties of aluminum honeycomb-based FSS were fabricated and measured to validate the proposed design strategies. Mechanical tests revealed compressive strength exceeding 2.1 MPa with a density of 0.702 g/cm3, highlighting its lightweight and load-bearing advantages.
期刊介绍:
IEEE Antennas and Wireless Propagation Letters (AWP Letters) is devoted to the rapid electronic publication of short manuscripts in the technical areas of Antennas and Wireless Propagation. These are areas of competence for the IEEE Antennas and Propagation Society (AP-S). AWPL aims to be one of the "fastest" journals among IEEE publications. This means that for papers that are eventually accepted, it is intended that an author may expect his or her paper to appear in IEEE Xplore, on average, around two months after submission.