Shear mechanical properties of loaded rock under drilling and dynamic load and its influence on the plastic zone of roadway

Borehole pressure relief helps prevent rock bursts. However, this may change the physical and mechanical properties of the surrounding rock, affect the variation of the plastic zone of the roadway, and lead to the failure of roadway support, thus threatening the safety of the roadway. In this paper, the variable angle shear test of drilled specimens under the action of static and dynamic loads is used to study the evolution of mechanical parameters of the specimens and their influence on the plastic zone of the surrounding rock. The shear strength decreases linearly with the increase of drilling diameter. With the increase of pre-static load level and dynamic load amplitude, the cohesion first increases and then decreases, and the internal friction angle decreases. Moreover, the shear failure surface changes from rough to smooth. The reasons include that the static load enhances the tooth cutting effect and the repeated friction of cracks caused by the dynamic load. Borehole pressure relief leads to an increase in the radius of the plastic zone of the surrounding rock following a quadratic function. The research results of this paper provide a theoretical basis for designing drilling unloading parameters and supporting parameters for rock burst roadways.