Modelling and Optimisation of FDM-Printed Short Carbon Fibre-Reinforced Nylon Using CCF and RSM.

Nylon reinforced with short carbon fibres exhibits superior mechanical properties. Its use as a feedstock for fused deposition modelling (FDM) can extend its applications to consumer goods and industrial products. To investigate the flexural and impact properties of the FDM-printed short carbon fibre-reinforced nylon, a central composite face-centred (CCF) design with four factors and three levels and the response surface method (RSM) were employed. The four primary process parameters are the extrusion and bed temperatures, printing speed, and layer thickness. The three investigated responses were the flexural strength, flexural modulus, and impact strength. Perturbation curves and contour plots were used to analyse the influences of the individual and two-way interactions of the response parameters, respectively. Second-order statistical models were constructed to predict and optimise the mechanical properties. The optimal comprehensive mechanical properties were determined using a desirability function combined with the entropy weighting method. The predicted results of best comprehensive mechanical properties are 169.881 MPa for the flexural strength, 9249.11 MPa for the flexural modulus, and 29.659 kJ∙m^-2 for the impact strength, achieved under the parameter combination of extrusion temperature of 318 °C, bed temperature of 90 °C, printing speed of 30 mm∙s^-1, and layer thickness of 0.1 mm. A small deviation between the predicted and experimental results indicated the high reliability of the proposed method. The optimal outcomes under the studied parameters showed higher robustness and integrity than previously reported results.