Binder-Free Immobilization of Photocatalyst on Membrane Surface for Efficient Photocatalytic H2O2 Production and Water Decontamination.

In photocatalytic water treatment processes, the particulate photocatalysts are typically immobilized on membrane, through either chemical/physical loading onto the surface or directly embedding in the membrane matrix. However, these immobilization strategies inevitably compromise the interfacial mass diffusion and cause activity decline relative to the suspended catalyst. Here, we propose a binder-free surface immobilization strategy for fabrication of high-activity photocatalytic membrane. Through a simple dimethylformamide (DMF) treatment, the nanofibers of polyvinylidene fluoride membrane were softened and stretched, creating enlarged micropores to efficiently capture the photocatalyst. Subsequently, the nanofibers underwent shrinking during DMF evaporation, thus firmly strapping the photocatalyst microparticles on the membrane surface. This surface self-bounded photocatalytic membrane, with firmly bounded yet highly exposed photocatalyst, exhibited 4.2-fold higher efficiency in hydrogen peroxide (H₂O₂) photosynthesis than the matrix-embedded control, due to improved O₂ accessibility and H₂O₂ diffusion. It even outperformed the suspension photocatalytic system attributed to alleviated H₂O₂ decomposition at the hydrophobic surface. When adopted for UV-based water treatment, the photocatalytic system exhibited tenfold faster micropollutants photodegradation than the catalyst-free control and demonstrated superior robustness for treating contaminated tap water, lake water and secondary wastewater effluent. This immobilization strategy can also be extended to the fabrication of other photocatalytic membranes with diverse catalyst types and membrane substrate. Overall, our work opens a facile avenue for fabrication of high-performance photocatalytic membranes, which may benefit advanced oxidation water purification application and beyond.