Neural network-based surrogate model in postprocessing of topology optimized structures.

This paper proposes a general method of creating an accurate neural network-based surrogate model for postprocessing a topologically optimized structure. When topology optimization results are converted into computer-aided design (CAD) files with smooth boundaries for manufacturability, finite element method (FEM) based stresses often do not agree with the topology optimized results due to changes of surface and mesh density. The conversion between topology optimization derived results and CAD files often requires postprocessing, an additional fine tuning of the geometry parameters to reconcile the change of the stress values. In this work, a feedforward, deep artificial neural network (DANN) is presented with varying architecture parameters that are found for each stress output of interest. This network is trained with the data based on a combination of Design of Experiments (DoE) models that have the geometry dimensions as inputs and stress readings under various loads as the outputs. A DANN-based surrogate model is constructed to enable fine tuning of all relevant stress performance metrics. This method of constructing an artificial network-based surrogate model minimizes the number of FEM computations required to generate an optimized, post-processed design. We present a case study of postprocessing a wind tunnel balance, a measurement device that yields the six force and moment components of a test aircraft. It needs to be designed considering multiple stress measures under combinations of the six loading conditions. Excellent performance of a neural network is presented in this paper in terms of accurate prediction of the highly nonlinear stresses under combinations of the six loads. Von Mises stress predictions are within 10% and axial force sensor stress predictions are within 2% for the final post-processed topology. The results support its usefulness for postprocessing of topology optimized structures.