低能光子辐射屏蔽用金属/金属氧化物富集聚合物复合材料的研制

IF 2.8 3区物理与天体物理 Q3 CHEMISTRY, PHYSICAL

Radiation Physics and Chemistry Pub Date : 2025-04-09 DOI:10.1016/j.radphyschem.2025.112807

Linas Kudrevičius, Jurgita Laurikaitienė, Gustė Laurikaitytė, Diana Adlienė

{"title":"低能光子辐射屏蔽用金属/金属氧化物富集聚合物复合材料的研制","authors":"Linas Kudrevičius, Jurgita Laurikaitienė, Gustė Laurikaitytė, Diana Adlienė","doi":"10.1016/j.radphyschem.2025.112807","DOIUrl":null,"url":null,"abstract":"<div><div>Increasing applications of ionizing radiation in medical and industrial processes indicate a growing demand for effective radiation shielding materials that are non-toxic and recyclable. Specific radiation–resistant, lead-free, lightweight shielding materials are required to protect personnel and patients against medical radiation since lead toxicity poses significant environmental and health risks and problems with lead utilization.</div><div>In this study 1.0 mm thick PVA polymer composite films containing 50 V/V% of different fillers (Tungsten (VI) oxide (WO<sub>3</sub>), Tantalum (V) oxide (Ta<sub>2</sub>O<sub>5</sub>), Tin (Sn), and Bismuth (Bi)) were fabricated and tested for radiation attenuation performance using Multimeter Barracuda with R100B detector (RTI Electronics AB, Sweden). Irradiation of films with low energy photons was performed in X-ray therapy unit GULMAY D3225 (UK). Irradiation of samples in Leksell Gamma Knife® Icon™ (Elekta, Sweden), and linear accelerator Varian Trilogy™ (California, USA) providing MeV range photons was performed additionally for the assessment of correlations between experimental data and modeling results in the broad energy range.</div><div>Photon attenuation and shielding efficiency of fabricated experimental samples: single-filled (PVA-WO<sub>3</sub>, PVA-Ta<sub>2</sub>O<sub>5</sub>, PVA-Sn, and PVA-Bi) and dual-filled (PVA-Bi-WO<sub>3</sub>, PVA-Ta<sub>2</sub>O<sub>5</sub>-WO<sub>3</sub>, PVA-Sn-WO<sub>3</sub>, PVA-Bi-Ta<sub>2</sub>O<sub>5</sub>, PVA-Sn-Ta<sub>2</sub>O<sub>5</sub>, PVA-Bi-Sn) polymer composites were assessed using experimental measurements data. Experimental results were verified against simulation data obtained using open-access software Phy-X/PSD and compared with the data corresponding to 0.25 and 0.5 mmPb lead equivalent as reference of required medical radiation shielding equipment.</div><div>It was shown that single filler PVA-Bi and dual-filler with WO<sub>3</sub>–Bi composites exhibited the highest radiation shielding efficiency in the low energy range and at certain energies were performing better than 0.25 mm Pb equivalency, indicating composites‘ potential to be explored in lead-free, lightweight, low-toxicity medical radiation shielding equipment.</div><div>Obtained results suggest that PVA-metal/metal oxide composites, especially those with bismuth and tungsten, are promising candidates for environmentally sustainable radiation shielding.</div></div>","PeriodicalId":20861,"journal":{"name":"Radiation Physics and Chemistry","volume":"234 ","pages":"Article 112807"},"PeriodicalIF":2.8000,"publicationDate":"2025-04-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Development of metal/metal oxide enriched polymer composites for radiation shielding of low-energy photons\",\"authors\":\"Linas Kudrevičius, Jurgita Laurikaitienė, Gustė Laurikaitytė, Diana Adlienė\",\"doi\":\"10.1016/j.radphyschem.2025.112807\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>Increasing applications of ionizing radiation in medical and industrial processes indicate a growing demand for effective radiation shielding materials that are non-toxic and recyclable. Specific radiation–resistant, lead-free, lightweight shielding materials are required to protect personnel and patients against medical radiation since lead toxicity poses significant environmental and health risks and problems with lead utilization.</div><div>In this study 1.0 mm thick PVA polymer composite films containing 50 V/V% of different fillers (Tungsten (VI) oxide (WO<sub>3</sub>), Tantalum (V) oxide (Ta<sub>2</sub>O<sub>5</sub>), Tin (Sn), and Bismuth (Bi)) were fabricated and tested for radiation attenuation performance using Multimeter Barracuda with R100B detector (RTI Electronics AB, Sweden). Irradiation of films with low energy photons was performed in X-ray therapy unit GULMAY D3225 (UK). Irradiation of samples in Leksell Gamma Knife® Icon™ (Elekta, Sweden), and linear accelerator Varian Trilogy™ (California, USA) providing MeV range photons was performed additionally for the assessment of correlations between experimental data and modeling results in the broad energy range.</div><div>Photon attenuation and shielding efficiency of fabricated experimental samples: single-filled (PVA-WO<sub>3</sub>, PVA-Ta<sub>2</sub>O<sub>5</sub>, PVA-Sn, and PVA-Bi) and dual-filled (PVA-Bi-WO<sub>3</sub>, PVA-Ta<sub>2</sub>O<sub>5</sub>-WO<sub>3</sub>, PVA-Sn-WO<sub>3</sub>, PVA-Bi-Ta<sub>2</sub>O<sub>5</sub>, PVA-Sn-Ta<sub>2</sub>O<sub>5</sub>, PVA-Bi-Sn) polymer composites were assessed using experimental measurements data. Experimental results were verified against simulation data obtained using open-access software Phy-X/PSD and compared with the data corresponding to 0.25 and 0.5 mmPb lead equivalent as reference of required medical radiation shielding equipment.</div><div>It was shown that single filler PVA-Bi and dual-filler with WO<sub>3</sub>–Bi composites exhibited the highest radiation shielding efficiency in the low energy range and at certain energies were performing better than 0.25 mm Pb equivalency, indicating composites‘ potential to be explored in lead-free, lightweight, low-toxicity medical radiation shielding equipment.</div><div>Obtained results suggest that PVA-metal/metal oxide composites, especially those with bismuth and tungsten, are promising candidates for environmentally sustainable radiation shielding.</div></div>\",\"PeriodicalId\":20861,\"journal\":{\"name\":\"Radiation Physics and Chemistry\",\"volume\":\"234 \",\"pages\":\"Article 112807\"},\"PeriodicalIF\":2.8000,\"publicationDate\":\"2025-04-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Radiation Physics and Chemistry\",\"FirstCategoryId\":\"92\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0969806X25002993\",\"RegionNum\":3,\"RegionCategory\":\"物理与天体物理\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"CHEMISTRY, PHYSICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Radiation Physics and Chemistry","FirstCategoryId":"92","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0969806X25002993","RegionNum":3,"RegionCategory":"物理与天体物理","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, PHYSICAL","Score":null,"Total":0}

引用次数: 0

摘要

电离辐射在医疗和工业过程中的应用日益增加，表明对无毒和可回收的有效辐射屏蔽材料的需求日益增长。由于铅毒性会造成重大的环境和健康风险以及铅的利用问题，因此需要特定的抗辐射、无铅、轻质屏蔽材料来保护人员和患者免受医疗辐射。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Development of metal/metal oxide enriched polymer composites for radiation shielding of low-energy photons

Increasing applications of ionizing radiation in medical and industrial processes indicate a growing demand for effective radiation shielding materials that are non-toxic and recyclable. Specific radiation–resistant, lead-free, lightweight shielding materials are required to protect personnel and patients against medical radiation since lead toxicity poses significant environmental and health risks and problems with lead utilization.

In this study 1.0 mm thick PVA polymer composite films containing 50 V/V% of different fillers (Tungsten (VI) oxide (WO₃), Tantalum (V) oxide (Ta₂O₅), Tin (Sn), and Bismuth (Bi)) were fabricated and tested for radiation attenuation performance using Multimeter Barracuda with R100B detector (RTI Electronics AB, Sweden). Irradiation of films with low energy photons was performed in X-ray therapy unit GULMAY D3225 (UK). Irradiation of samples in Leksell Gamma Knife® Icon™ (Elekta, Sweden), and linear accelerator Varian Trilogy™ (California, USA) providing MeV range photons was performed additionally for the assessment of correlations between experimental data and modeling results in the broad energy range.

Photon attenuation and shielding efficiency of fabricated experimental samples: single-filled (PVA-WO₃, PVA-Ta₂O₅, PVA-Sn, and PVA-Bi) and dual-filled (PVA-Bi-WO₃, PVA-Ta₂O₅-WO₃, PVA-Sn-WO₃, PVA-Bi-Ta₂O₅, PVA-Sn-Ta₂O₅, PVA-Bi-Sn) polymer composites were assessed using experimental measurements data. Experimental results were verified against simulation data obtained using open-access software Phy-X/PSD and compared with the data corresponding to 0.25 and 0.5 mmPb lead equivalent as reference of required medical radiation shielding equipment.

It was shown that single filler PVA-Bi and dual-filler with WO₃–Bi composites exhibited the highest radiation shielding efficiency in the low energy range and at certain energies were performing better than 0.25 mm Pb equivalency, indicating composites‘ potential to be explored in lead-free, lightweight, low-toxicity medical radiation shielding equipment.

Obtained results suggest that PVA-metal/metal oxide composites, especially those with bismuth and tungsten, are promising candidates for environmentally sustainable radiation shielding.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Radiation Physics and Chemistry 化学-核科学技术

CiteScore

5.60

自引率

17.20%

发文量

574

审稿时长

12 weeks

期刊介绍： Radiation Physics and Chemistry is a multidisciplinary journal that provides a medium for publication of substantial and original papers, reviews, and short communications which focus on research and developments involving ionizing radiation in radiation physics, radiation chemistry and radiation processing. The journal aims to publish papers with significance to an international audience, containing substantial novelty and scientific impact. The Editors reserve the rights to reject, with or without external review, papers that do not meet these criteria. This could include papers that are very similar to previous publications, only with changed target substrates, employed materials, analyzed sites and experimental methods, report results without presenting new insights and/or hypothesis testing, or do not focus on the radiation effects.