Farah Fahim , Muhammad Ramzan , Muhammad Imran , Majid Niaz Akhtar , Abdullah Almohammedi , Mustafa Mahmoud
{"title":"活性黑5染料对Bi2-2xCoxZnxO3纳米颗粒的物理化学、光催化降解、可回收性、动力学和清除研究","authors":"Farah Fahim , Muhammad Ramzan , Muhammad Imran , Majid Niaz Akhtar , Abdullah Almohammedi , Mustafa Mahmoud","doi":"10.1016/j.ceramint.2025.01.089","DOIUrl":null,"url":null,"abstract":"<div><div>Semiconductor photocatalysis technology has great potential as a viable alternative to conventional scientific and technological approaches. The chemical co-precipitation approach was employed in this study to synthesize pure Bi<sub>2</sub>O<sub>3</sub> and doped Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub> NPs (where x = 0.0, 0.2, 0.4, 0.6, and 0.8). The effects on the structural, morphological, optical, electrochemical, and photocatalytic features were evaluated. The samples were characterized by using XRD, SEM, TEM, XPS, BET, FTIR, PL, CV, Raman and UV–Vis, spectroscopy. The XRD spectra verified that the structure is monoclinic, with a space group of <em>P</em>2<sub>1</sub>/<em>c</em>. Additionally, the average size of the crystallites was between 24 and 49 nm. Scanning Electron Microscopy (SEM) and High-Resolution Transmission Electron Microscopy (HR-TEM) were used to evaluate the materials' surface morphology. The existence of functional groups in Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub> nanoparticles was confirmed by FTIR measurements. The photoluminescence (PL) spectra of the synthesized nanomaterials revealed a significant occurrence of charge separation (e<sup>−</sup>-h<sup>+</sup>) and a minimal rate of recombination in the extensively substituted materials which is responsible for the enhancement of photocatalytic activity. Cyclic voltammetry was employed to investigate the functional electrodes. Using a potential window ranging from 0 to 0.4 V, the cyclic voltammogram of each working electrode was seen at various scan rates (10-40 mVs<sup>–1</sup>). In comparison to pure Bi<sub>2</sub>O<sub>3</sub>, the specific capacitance was improved by the synergistic effects of Co and Zn in the Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub>. The purpose of the XPS investigation to analyze the chemical composition and surface valence state of Co and Zn doped Bi<sub>2</sub>O<sub>3</sub> NPs. The optical band gap was evaluated using UV–Vis spectroscopy and showed a decreasing trend from 2.66 to 2.22 eV with increasing the doping concentration. BET analysis was used to determine the surface areas of pure Bi<sub>2</sub>O<sub>3</sub> and doped Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub> NPs using nitrogen (N<sub>2</sub>) at 78K and desorption/adsorption isotherms. The photocatalytic activity of Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub> was evaluated under sunlight irradiation using reactive black-5 (RB-5) dye as the target and exhibited a 90 % reduction in dye concentration within 105 min. The doped Bi<sub>2</sub>O<sub>3</sub> nanoparticles exhibited promising photocatalysts for the removal of the dye from wastewater. Recycling experiments were used to verify the stability of the synthesized nanoparticles, and the findings showed promising stability and reusability. The phytotoxicity experiments were performed by the germination of <em>Coriandrum sativum</em> seeds in RB-5 dye, both treated and untreated. In addition, scavenging tests were conducted using reactive species trapping to confirm the presence of the most prevalent reactive species. The prepared semiconductor materials are suitable candidates for environmental remediation.</div></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":"51 10","pages":"Pages 12462-12479"},"PeriodicalIF":5.1000,"publicationDate":"2025-04-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Physicochemical, photocatalytic degradation, recyclability, kinetics, and scavenging studies of Bi2-2xCoxZnxO3 nanoparticles with reactive black 5 dye\",\"authors\":\"Farah Fahim , Muhammad Ramzan , Muhammad Imran , Majid Niaz Akhtar , Abdullah Almohammedi , Mustafa Mahmoud\",\"doi\":\"10.1016/j.ceramint.2025.01.089\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>Semiconductor photocatalysis technology has great potential as a viable alternative to conventional scientific and technological approaches. The chemical co-precipitation approach was employed in this study to synthesize pure Bi<sub>2</sub>O<sub>3</sub> and doped Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub> NPs (where x = 0.0, 0.2, 0.4, 0.6, and 0.8). The effects on the structural, morphological, optical, electrochemical, and photocatalytic features were evaluated. The samples were characterized by using XRD, SEM, TEM, XPS, BET, FTIR, PL, CV, Raman and UV–Vis, spectroscopy. The XRD spectra verified that the structure is monoclinic, with a space group of <em>P</em>2<sub>1</sub>/<em>c</em>. Additionally, the average size of the crystallites was between 24 and 49 nm. Scanning Electron Microscopy (SEM) and High-Resolution Transmission Electron Microscopy (HR-TEM) were used to evaluate the materials' surface morphology. The existence of functional groups in Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub> nanoparticles was confirmed by FTIR measurements. The photoluminescence (PL) spectra of the synthesized nanomaterials revealed a significant occurrence of charge separation (e<sup>−</sup>-h<sup>+</sup>) and a minimal rate of recombination in the extensively substituted materials which is responsible for the enhancement of photocatalytic activity. Cyclic voltammetry was employed to investigate the functional electrodes. Using a potential window ranging from 0 to 0.4 V, the cyclic voltammogram of each working electrode was seen at various scan rates (10-40 mVs<sup>–1</sup>). In comparison to pure Bi<sub>2</sub>O<sub>3</sub>, the specific capacitance was improved by the synergistic effects of Co and Zn in the Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub>. The purpose of the XPS investigation to analyze the chemical composition and surface valence state of Co and Zn doped Bi<sub>2</sub>O<sub>3</sub> NPs. The optical band gap was evaluated using UV–Vis spectroscopy and showed a decreasing trend from 2.66 to 2.22 eV with increasing the doping concentration. BET analysis was used to determine the surface areas of pure Bi<sub>2</sub>O<sub>3</sub> and doped Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub> NPs using nitrogen (N<sub>2</sub>) at 78K and desorption/adsorption isotherms. The photocatalytic activity of Bi<sub>2-2x</sub>Co<sub>x</sub>Zn<sub>x</sub>O<sub>3</sub> was evaluated under sunlight irradiation using reactive black-5 (RB-5) dye as the target and exhibited a 90 % reduction in dye concentration within 105 min. The doped Bi<sub>2</sub>O<sub>3</sub> nanoparticles exhibited promising photocatalysts for the removal of the dye from wastewater. Recycling experiments were used to verify the stability of the synthesized nanoparticles, and the findings showed promising stability and reusability. The phytotoxicity experiments were performed by the germination of <em>Coriandrum sativum</em> seeds in RB-5 dye, both treated and untreated. In addition, scavenging tests were conducted using reactive species trapping to confirm the presence of the most prevalent reactive species. The prepared semiconductor materials are suitable candidates for environmental remediation.</div></div>\",\"PeriodicalId\":267,\"journal\":{\"name\":\"Ceramics International\",\"volume\":\"51 10\",\"pages\":\"Pages 12462-12479\"},\"PeriodicalIF\":5.1000,\"publicationDate\":\"2025-04-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Ceramics International\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0272884225000896\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, CERAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884225000896","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
Physicochemical, photocatalytic degradation, recyclability, kinetics, and scavenging studies of Bi2-2xCoxZnxO3 nanoparticles with reactive black 5 dye
Semiconductor photocatalysis technology has great potential as a viable alternative to conventional scientific and technological approaches. The chemical co-precipitation approach was employed in this study to synthesize pure Bi2O3 and doped Bi2-2xCoxZnxO3 NPs (where x = 0.0, 0.2, 0.4, 0.6, and 0.8). The effects on the structural, morphological, optical, electrochemical, and photocatalytic features were evaluated. The samples were characterized by using XRD, SEM, TEM, XPS, BET, FTIR, PL, CV, Raman and UV–Vis, spectroscopy. The XRD spectra verified that the structure is monoclinic, with a space group of P21/c. Additionally, the average size of the crystallites was between 24 and 49 nm. Scanning Electron Microscopy (SEM) and High-Resolution Transmission Electron Microscopy (HR-TEM) were used to evaluate the materials' surface morphology. The existence of functional groups in Bi2-2xCoxZnxO3 nanoparticles was confirmed by FTIR measurements. The photoluminescence (PL) spectra of the synthesized nanomaterials revealed a significant occurrence of charge separation (e−-h+) and a minimal rate of recombination in the extensively substituted materials which is responsible for the enhancement of photocatalytic activity. Cyclic voltammetry was employed to investigate the functional electrodes. Using a potential window ranging from 0 to 0.4 V, the cyclic voltammogram of each working electrode was seen at various scan rates (10-40 mVs–1). In comparison to pure Bi2O3, the specific capacitance was improved by the synergistic effects of Co and Zn in the Bi2-2xCoxZnxO3. The purpose of the XPS investigation to analyze the chemical composition and surface valence state of Co and Zn doped Bi2O3 NPs. The optical band gap was evaluated using UV–Vis spectroscopy and showed a decreasing trend from 2.66 to 2.22 eV with increasing the doping concentration. BET analysis was used to determine the surface areas of pure Bi2O3 and doped Bi2-2xCoxZnxO3 NPs using nitrogen (N2) at 78K and desorption/adsorption isotherms. The photocatalytic activity of Bi2-2xCoxZnxO3 was evaluated under sunlight irradiation using reactive black-5 (RB-5) dye as the target and exhibited a 90 % reduction in dye concentration within 105 min. The doped Bi2O3 nanoparticles exhibited promising photocatalysts for the removal of the dye from wastewater. Recycling experiments were used to verify the stability of the synthesized nanoparticles, and the findings showed promising stability and reusability. The phytotoxicity experiments were performed by the germination of Coriandrum sativum seeds in RB-5 dye, both treated and untreated. In addition, scavenging tests were conducted using reactive species trapping to confirm the presence of the most prevalent reactive species. The prepared semiconductor materials are suitable candidates for environmental remediation.
期刊介绍:
Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties.
Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour.
Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.