基于碳纳米管覆盖的微波超表面天线的二氧化碳探测

IF 4.6 3区材料科学 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY

Materials Science and Engineering: B Pub Date : 2025-04-03 DOI:10.1016/j.mseb.2025.118282

Alina Cismaru, Mircea Dragoman, Sergiu Iordănescu, Cosmin Obreja, Valentin Buiculescu, Hamza El Ghannudi, Cătălin Pârvulescu, Damir Mladenovic, Mihaela Carp, Oana Brâncoveanu

{"title":"基于碳纳米管覆盖的微波超表面天线的二氧化碳探测","authors":"Alina Cismaru, Mircea Dragoman, Sergiu Iordănescu, Cosmin Obreja, Valentin Buiculescu, Hamza El Ghannudi, Cătălin Pârvulescu, Damir Mladenovic, Mihaela Carp, Oana Brâncoveanu","doi":"10.1016/j.mseb.2025.118282","DOIUrl":null,"url":null,"abstract":"<div><div>In this paper a novel CO<sub>2</sub> sensor based on two types of metasurface-based antennas coated with single wall carbon nanotubes (SWCNTs), and functionalized with carbon nitride nanosheets (g-C<sub>3</sub>N<sub>4</sub>) as a gas adsorber is presented. The antenna A1 with complementary split-ring resonators (CSRRs) integrated into the patch and covered with CNTs works at 16.06 GHz (A1 CNT) and the antenna A2 with CSRRs incorporated into the ground plane covered with CNTs works at 17.06 GHz. The experimental results demonstrate a shift in frequency with almost 5 MHz for A1 CNT and with almost 15 MHz for A2 CNT at the concentration level of 1800 ppm. The interaction between CO<sub>2</sub> and the CNTs covering the metasurface-based antennas produced a good sensitivity, of 2.7 kHz/ppm for A1 CNT and 8.3 kHz/ppm for A2 CNT at the concentration level of 1800 ppm.</div></div>","PeriodicalId":18233,"journal":{"name":"Materials Science and Engineering: B","volume":"318 ","pages":"Article 118282"},"PeriodicalIF":4.6000,"publicationDate":"2025-04-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"CO2 detection using microwave metasurface-based antennas covered with carbon nanotubes\",\"authors\":\"Alina Cismaru, Mircea Dragoman, Sergiu Iordănescu, Cosmin Obreja, Valentin Buiculescu, Hamza El Ghannudi, Cătălin Pârvulescu, Damir Mladenovic, Mihaela Carp, Oana Brâncoveanu\",\"doi\":\"10.1016/j.mseb.2025.118282\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>In this paper a novel CO<sub>2</sub> sensor based on two types of metasurface-based antennas coated with single wall carbon nanotubes (SWCNTs), and functionalized with carbon nitride nanosheets (g-C<sub>3</sub>N<sub>4</sub>) as a gas adsorber is presented. The antenna A1 with complementary split-ring resonators (CSRRs) integrated into the patch and covered with CNTs works at 16.06 GHz (A1 CNT) and the antenna A2 with CSRRs incorporated into the ground plane covered with CNTs works at 17.06 GHz. The experimental results demonstrate a shift in frequency with almost 5 MHz for A1 CNT and with almost 15 MHz for A2 CNT at the concentration level of 1800 ppm. The interaction between CO<sub>2</sub> and the CNTs covering the metasurface-based antennas produced a good sensitivity, of 2.7 kHz/ppm for A1 CNT and 8.3 kHz/ppm for A2 CNT at the concentration level of 1800 ppm.</div></div>\",\"PeriodicalId\":18233,\"journal\":{\"name\":\"Materials Science and Engineering: B\",\"volume\":\"318 \",\"pages\":\"Article 118282\"},\"PeriodicalIF\":4.6000,\"publicationDate\":\"2025-04-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Materials Science and Engineering: B\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0921510725003058\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materials Science and Engineering: B","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0921510725003058","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}

引用次数: 0

摘要

本文提出了一种基于两种超表面天线的新型CO2传感器，该天线包覆单壁碳纳米管（SWCNTs），并以氮化碳纳米片（g-C3N4）作为气体吸附剂进行功能化。集成在贴片中并覆盖CNTs的互补裂环谐振器（csrs）天线A1工作在16.06 GHz (A1 CNT)，而集成在接地面并覆盖CNTs的csrs天线A2工作在17.06 GHz。实验结果表明，在1800 ppm的浓度水平下，A1碳纳米管的频率变化近5 MHz， A2碳纳米管的频率变化近15 MHz。CO2与覆盖超表面天线的碳纳米管之间的相互作用产生了良好的灵敏度，在浓度水平为1800 ppm时，A1碳纳米管的灵敏度为2.7 kHz/ppm， A2碳纳米管的灵敏度为8.3 kHz/ppm。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

CO2 detection using microwave metasurface-based antennas covered with carbon nanotubes

查看原文本刊更多论文

CO2 detection using microwave metasurface-based antennas covered with carbon nanotubes

In this paper a novel CO₂ sensor based on two types of metasurface-based antennas coated with single wall carbon nanotubes (SWCNTs), and functionalized with carbon nitride nanosheets (g-C₃N₄) as a gas adsorber is presented. The antenna A1 with complementary split-ring resonators (CSRRs) integrated into the patch and covered with CNTs works at 16.06 GHz (A1 CNT) and the antenna A2 with CSRRs incorporated into the ground plane covered with CNTs works at 17.06 GHz. The experimental results demonstrate a shift in frequency with almost 5 MHz for A1 CNT and with almost 15 MHz for A2 CNT at the concentration level of 1800 ppm. The interaction between CO₂ and the CNTs covering the metasurface-based antennas produced a good sensitivity, of 2.7 kHz/ppm for A1 CNT and 8.3 kHz/ppm for A2 CNT at the concentration level of 1800 ppm.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Materials Science and Engineering: B 工程技术-材料科学：综合

CiteScore

5.60

自引率

2.80%

发文量

481

审稿时长

3.5 months

期刊介绍： The journal provides an international medium for the publication of theoretical and experimental studies and reviews related to the electronic, electrochemical, ionic, magnetic, optical, and biosensing properties of solid state materials in bulk, thin film and particulate forms. Papers dealing with synthesis, processing, characterization, structure, physical properties and computational aspects of nano-crystalline, crystalline, amorphous and glassy forms of ceramics, semiconductors, layered insertion compounds, low-dimensional compounds and systems, fast-ion conductors, polymers and dielectrics are viewed as suitable for publication. Articles focused on nano-structured aspects of these advanced solid-state materials will also be considered suitable.