Optimization of HVAF Process Parameters for Enhancing FeCoNiCrAl HEA Bond Coatings in Thermal Barrier Systems

To achieve higher engine combustion efficiency while reducing emissions, it is necessary to address the challenges posed by elevated operating temperatures. High entropy alloys (HEAs) have emerged as promising materials for this purpose, offering exceptional properties at high temperatures, including synergistic effects and excellent resistance to oxidation and corrosion. In this study, a FeCoNiCrAl HEA was investigated as a bond coat material due to its excellent balance of strength and ductility, coupled with outstanding oxidation resistance. It was deposited using HVAF M3 and i7 guns equipped with different nozzles/powder injectors and pressures. Notably, this research marks the first study of the i7 gun globally for the HEA bond coat, coupled with the optimization of HVAF parameters for both i7 and M3 guns. Characterization of both powder and as-sprayed samples was carried out using X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), and field emission scanning electron microscopy (FESEM) techniques. The results revealed the formation of a dense and homogeneous microstructure. Additionally, isothermal oxidation tests were conducted to analyze the behavior of the thermally grown oxide. After 50 hours at 1000 °C, a dense, uniform, and thin alumina TGO layer was observed to have formed. These tests revealed that FeCoNiCrAl HEA exhibits significant potential to enhance oxidation resistance at high temperatures.