蛇纹石酸分解污泥的湿法冶金无废工艺研究

IF 0.8 4区 材料科学 Q4 METALLURGY & METALLURGICAL ENGINEERING
N. L. Mokhireva, I. V. Loginova, V. R. Mirolyubov, A. A. Shoppert
{"title":"蛇纹石酸分解污泥的湿法冶金无废工艺研究","authors":"N. L. Mokhireva,&nbsp;I. V. Loginova,&nbsp;V. R. Mirolyubov,&nbsp;A. A. Shoppert","doi":"10.1007/s11015-025-01875-x","DOIUrl":null,"url":null,"abstract":"<div><p>We develop a technology for the production of iron oxide-pigment and nickel concentrate from the sludges of acid decomposition of serpentinite. We study the chemical and phase compositions of the polymetallic sludge obtained as a result of cleaning of the magnesium-chloride solution performed after the acid decomposition of serpentinite from the Bazhenov deposit. It is shown that the predominant element in the composition of sludge is Fe, and its weight fraction recalculated to iron (III) oxide is 53–56%. The weight fraction of Ni in the polymetallic sludge attains 1.3%. It is experimentally demonstrated that the procedure of selective leaching seems to be the most acceptable method for separating elements in the polymetallic sludge. The maximum degree of nickel (II) extraction equal to 96–99% is observed for pH = 1.4–1.5 at a temperature of 80 °C and a concentration of the HCl solution equal to 20 wt%, while the degree of extraction of iron (III) into the solution does not exceed 7%. A technological scheme of processing of polymetallic sludges is developed. The degree of nickel (II) extraction into the solution is 98%. The obtained iron-oxide pigment contains 93 wt% Fe<sub>2</sub>O<sub>3</sub>. The remaining qualitative characteristics of the pigment are comparable with the characteristics of the YIPIN S130 (China) pigment.</p></div>","PeriodicalId":702,"journal":{"name":"Metallurgist","volume":"68 10","pages":"1595 - 1607"},"PeriodicalIF":0.8000,"publicationDate":"2025-02-26","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Waste-free technology of hydrometallurgical processing of sludges from the acid decomposition of serpentinites\",\"authors\":\"N. L. Mokhireva,&nbsp;I. V. Loginova,&nbsp;V. R. Mirolyubov,&nbsp;A. A. Shoppert\",\"doi\":\"10.1007/s11015-025-01875-x\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>We develop a technology for the production of iron oxide-pigment and nickel concentrate from the sludges of acid decomposition of serpentinite. We study the chemical and phase compositions of the polymetallic sludge obtained as a result of cleaning of the magnesium-chloride solution performed after the acid decomposition of serpentinite from the Bazhenov deposit. It is shown that the predominant element in the composition of sludge is Fe, and its weight fraction recalculated to iron (III) oxide is 53–56%. The weight fraction of Ni in the polymetallic sludge attains 1.3%. It is experimentally demonstrated that the procedure of selective leaching seems to be the most acceptable method for separating elements in the polymetallic sludge. The maximum degree of nickel (II) extraction equal to 96–99% is observed for pH = 1.4–1.5 at a temperature of 80 °C and a concentration of the HCl solution equal to 20 wt%, while the degree of extraction of iron (III) into the solution does not exceed 7%. A technological scheme of processing of polymetallic sludges is developed. The degree of nickel (II) extraction into the solution is 98%. The obtained iron-oxide pigment contains 93 wt% Fe<sub>2</sub>O<sub>3</sub>. The remaining qualitative characteristics of the pigment are comparable with the characteristics of the YIPIN S130 (China) pigment.</p></div>\",\"PeriodicalId\":702,\"journal\":{\"name\":\"Metallurgist\",\"volume\":\"68 10\",\"pages\":\"1595 - 1607\"},\"PeriodicalIF\":0.8000,\"publicationDate\":\"2025-02-26\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Metallurgist\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11015-025-01875-x\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"METALLURGY & METALLURGICAL ENGINEERING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metallurgist","FirstCategoryId":"88","ListUrlMain":"https://link.springer.com/article/10.1007/s11015-025-01875-x","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"METALLURGY & METALLURGICAL ENGINEERING","Score":null,"Total":0}
引用次数: 0

摘要

研究了利用蛇纹岩酸分解污泥生产氧化铁颜料和镍精矿的工艺。我们研究了多金属污泥的化学和物相组成,这些污泥是在巴切诺夫矿床的蛇纹岩酸分解后对氯化镁溶液进行清洗后得到的。结果表明,污泥成分中主要元素为铁,重计为氧化铁(III)的质量分数为53 ~ 56%。多金属污泥中Ni的重量分数达到1.3%。实验表明,选择性浸出法是分离多金属污泥中元素的最可行的方法。当pH = 1.4-1.5,温度为80 ℃,HCl溶液浓度为20 wt%时,镍(II)的最大萃取率为96-99%,而铁(III)的萃取率不超过7%。提出了一种处理多金属污泥的工艺方案。镍(II)在溶液中的萃取率为98%。得到的氧化铁颜料含有93 wt% Fe2O3。颜料的其余定性特性与易品S130(中国)颜料的特性相当。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

Waste-free technology of hydrometallurgical processing of sludges from the acid decomposition of serpentinites

Waste-free technology of hydrometallurgical processing of sludges from the acid decomposition of serpentinites

We develop a technology for the production of iron oxide-pigment and nickel concentrate from the sludges of acid decomposition of serpentinite. We study the chemical and phase compositions of the polymetallic sludge obtained as a result of cleaning of the magnesium-chloride solution performed after the acid decomposition of serpentinite from the Bazhenov deposit. It is shown that the predominant element in the composition of sludge is Fe, and its weight fraction recalculated to iron (III) oxide is 53–56%. The weight fraction of Ni in the polymetallic sludge attains 1.3%. It is experimentally demonstrated that the procedure of selective leaching seems to be the most acceptable method for separating elements in the polymetallic sludge. The maximum degree of nickel (II) extraction equal to 96–99% is observed for pH = 1.4–1.5 at a temperature of 80 °C and a concentration of the HCl solution equal to 20 wt%, while the degree of extraction of iron (III) into the solution does not exceed 7%. A technological scheme of processing of polymetallic sludges is developed. The degree of nickel (II) extraction into the solution is 98%. The obtained iron-oxide pigment contains 93 wt% Fe2O3. The remaining qualitative characteristics of the pigment are comparable with the characteristics of the YIPIN S130 (China) pigment.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Metallurgist
Metallurgist 工程技术-冶金工程
CiteScore
1.50
自引率
44.40%
发文量
151
审稿时长
4-8 weeks
期刊介绍: Metallurgist is the leading Russian journal in metallurgy. Publication started in 1956. Basic topics covered include: State of the art and development of enterprises in ferrous and nonferrous metallurgy and mining; Metallurgy of ferrous, nonferrous, rare, and precious metals; Metallurgical equipment; Automation and control; Protection of labor; Protection of the environment; Resources and energy saving; Quality and certification; History of metallurgy; Inventions (patents).
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信