- Book学术

发布求助

文献互助智能选刊最新文献

IF 0.4 4区物理与天体物理 Q4 PHYSICS, MULTIDISCIPLINARY

Russian Physics Journal Pub Date : 2025-01-14 DOI:10.1007/s11182-024-03344-5

A. M. Cheremnov, A. V. Chumaevskii, E. O. Knyazhev, E. A. Kolubaev

引用次数: 0

摘要

CuSn6 铜合金样品是通过多道摩擦搅拌加工制成的。其检测结果表明，在搅拌区形成了 5.8-7.6 μm 的等轴晶粒。由于材料在加工后的搅拌区发生了脱硬化，因此拉伸强度降低，延展性增加。多道加工后，摩擦系数和磨损系数降低。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Effect of multipass friction stir processing on structure formation, mechanical and tribological properties of CuSn6 copper alloy

The samples of CuSn6 copper alloy are produced by multipass friction stir processing. Their examination reveals the presence of 5.8–7.6 μm equiaxed grains formed in the stir zone. A decrease in tensile strength and an increase in ductility are observed as a result of material de-hardening in the stir zone after its processing. The coefficients of friction and wear decrease after multi-pass processing.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Russian Physics Journal PHYSICS, MULTIDISCIPLINARY-

CiteScore

1.00

自引率

50.00%

发文量

208

审稿时长

3-6 weeks

期刊介绍： Russian Physics Journal covers the broad spectrum of specialized research in applied physics, with emphasis on work with practical applications in solid-state physics, optics, and magnetism. Particularly interesting results are reported in connection with: electroluminescence and crystal phospors; semiconductors; phase transformations in solids; superconductivity; properties of thin films; and magnetomechanical phenomena.