A 28-Gb/s Single-Ended PAM-4 Transceiver With Active-Inductor Equalizer and Amplitude- Detection LSB Decoder for Memory Interfaces

This study proposes a power-efficient 28-Gb/s single-ended four-level pulse amplitude modulation (PAM-4) transceiver (TRX) for next-generation memory interfaces. In the transmitter (TX), an active-inductor equalizer (EQAI) is utilized, while in the receiver (RX), an amplitude-detection least significant bit (LSB) decoder is employed. In the TX, conventional equalization techniques consume substantial power owing to the inclusion of additional components and strong driving power required to mitigate channel-induced intersymbol interference (ISI). However, the proposed EQAI achieves a bandwidth extension up to the Nyquist frequency through gain boosting while reducing hardware costs and minimizing the driving strength. This results in a simple structure with operational efficiency, facilitating low power consumption and a compact area compared with conventional TX equalizers. In PAM-4 RX, the power dissipation is proportional to the clock buffer and the number of comparators used for data decoding. To improve the hardware cost and the power usage in the RX, the proposed RX design utilizes an amplitude-detection LSB decoder, which reduces the number of comparators and comprises a one-stage structure by detecting the amplitude differences between the reference and input voltages during LSB decoding. This ensures the hardware cost and power consumption improvement while implementing a one-tap direct decision feedback equalizer (DFE). The TRX for memory interfaces is optimized for low-power performance by employing these methods, resulting in a notable energy efficiency of 0.96 pJ/bit. This structure is fabricated using a 28-nm CMOS technology, and the core area of the TRX occupies 0.0053 mm2.