Correction to “Cellulose Microgel Toughening of Starch Nanocomposites: Exploiting the Advantages of Micro-Nanoscale Networks”

In our original paper, in Figure 4, panels C and D are identical because we accidentally used the same image. Figure 4. (A) Tensile stress–strain curves of neat PLS, CM/PLS nanocomposites, and CNF/PLS nanocomposites. (B) Photographs of neat PLS, CM/PLS-4, and CNF/PLS-4 specimens stretched at 30% strain. (C) Toughness comparison of samples with different filler contents. (D) Break elongation comparison of samples with different filler contents. (E) Tensile stress–strain curves of PLS and CM/PLS nanocomposites during five cycles of loading and unloading to 30% strain. (F) Dissipation of energy difference between the first cycle and fifth cycle of the samples. The correct Figure 4 is below. No other content or conclusion of the published paper is affected. This article has not yet been cited by other publications.