Punam Tiwary, Amit K. Chakraborty, Holly J. Edwards, Vinod R. Dhanak, Rajat Mahapatra
{"title":"氧化石墨烯湿度传感器：衬底效应","authors":"Punam Tiwary, Amit K. Chakraborty, Holly J. Edwards, Vinod R. Dhanak, Rajat Mahapatra","doi":"10.1007/s11664-024-11552-5","DOIUrl":null,"url":null,"abstract":"<div><p>A graphene oxide (GO)-based humidity sensor is reported in this work wherein the influence of the substrate on its humidity-sensing properties is compared by depositing a GO film on two different substrates: glass and wearable fabric. While the GO film exhibits sensitivity to humidity for both substrates, its response varies from 35% for the glass substrate to 74% for wearable fabric at 60% relative humidity (RH), clearly indicating the superiority of the wearable fabric over glass. The sensors (on both substrates) show almost no sensitivity to several common volatile organic compounds (VOCs) and gases, suggesting their high selectivity towards humidity. In both cases, the sensor can detect humidity with high repeatability over several cycles and exhibits fast response and recovery times of 6 s/10 s and 7 s/12 s for glass and wearable fabric, respectively. The sensing mechanism is explained in terms of pre-adsorbed surface oxygen ions, as measured by the change in water signal upon exposure of the GO film to humidity using Fourier transform infrared (FTIR) spectroscopy. Thus, we demonstrate that the developed GO film on wearable fabric can act as a low-cost, flexible, and wearable humidity sensor with good sensitivity, reproducibility, and selectivity.</p><h3>Graphical abstract</h3>\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>","PeriodicalId":626,"journal":{"name":"Journal of Electronic Materials","volume":"54 1","pages":"321 - 335"},"PeriodicalIF":2.2000,"publicationDate":"2024-11-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Graphene Oxide Humidity Sensor: Effect of Substrates\",\"authors\":\"Punam Tiwary, Amit K. Chakraborty, Holly J. Edwards, Vinod R. Dhanak, Rajat Mahapatra\",\"doi\":\"10.1007/s11664-024-11552-5\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>A graphene oxide (GO)-based humidity sensor is reported in this work wherein the influence of the substrate on its humidity-sensing properties is compared by depositing a GO film on two different substrates: glass and wearable fabric. While the GO film exhibits sensitivity to humidity for both substrates, its response varies from 35% for the glass substrate to 74% for wearable fabric at 60% relative humidity (RH), clearly indicating the superiority of the wearable fabric over glass. The sensors (on both substrates) show almost no sensitivity to several common volatile organic compounds (VOCs) and gases, suggesting their high selectivity towards humidity. In both cases, the sensor can detect humidity with high repeatability over several cycles and exhibits fast response and recovery times of 6 s/10 s and 7 s/12 s for glass and wearable fabric, respectively. The sensing mechanism is explained in terms of pre-adsorbed surface oxygen ions, as measured by the change in water signal upon exposure of the GO film to humidity using Fourier transform infrared (FTIR) spectroscopy. Thus, we demonstrate that the developed GO film on wearable fabric can act as a low-cost, flexible, and wearable humidity sensor with good sensitivity, reproducibility, and selectivity.</p><h3>Graphical abstract</h3>\\n<div><figure><div><div><picture><source><img></source></picture></div></div></figure></div></div>\",\"PeriodicalId\":626,\"journal\":{\"name\":\"Journal of Electronic Materials\",\"volume\":\"54 1\",\"pages\":\"321 - 335\"},\"PeriodicalIF\":2.2000,\"publicationDate\":\"2024-11-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Electronic Materials\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://link.springer.com/article/10.1007/s11664-024-11552-5\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Electronic Materials","FirstCategoryId":"5","ListUrlMain":"https://link.springer.com/article/10.1007/s11664-024-11552-5","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
Graphene Oxide Humidity Sensor: Effect of Substrates
A graphene oxide (GO)-based humidity sensor is reported in this work wherein the influence of the substrate on its humidity-sensing properties is compared by depositing a GO film on two different substrates: glass and wearable fabric. While the GO film exhibits sensitivity to humidity for both substrates, its response varies from 35% for the glass substrate to 74% for wearable fabric at 60% relative humidity (RH), clearly indicating the superiority of the wearable fabric over glass. The sensors (on both substrates) show almost no sensitivity to several common volatile organic compounds (VOCs) and gases, suggesting their high selectivity towards humidity. In both cases, the sensor can detect humidity with high repeatability over several cycles and exhibits fast response and recovery times of 6 s/10 s and 7 s/12 s for glass and wearable fabric, respectively. The sensing mechanism is explained in terms of pre-adsorbed surface oxygen ions, as measured by the change in water signal upon exposure of the GO film to humidity using Fourier transform infrared (FTIR) spectroscopy. Thus, we demonstrate that the developed GO film on wearable fabric can act as a low-cost, flexible, and wearable humidity sensor with good sensitivity, reproducibility, and selectivity.
期刊介绍：
The Journal of Electronic Materials (JEM) reports monthly on the science and technology of electronic materials, while examining new applications for semiconductors, magnetic alloys, dielectrics, nanoscale materials, and photonic materials. The journal welcomes articles on methods for preparing and evaluating the chemical, physical, electronic, and optical properties of these materials. Specific areas of interest are materials for state-of-the-art transistors, nanotechnology, electronic packaging, detectors, emitters, metallization, superconductivity, and energy applications.
Review papers on current topics enable individuals in the field of electronics to keep abreast of activities in areas peripheral to their own. JEM also selects papers from conferences such as the Electronic Materials Conference, the U.S. Workshop on the Physics and Chemistry of II-VI Materials, and the International Conference on Thermoelectrics. It benefits both specialists and non-specialists in the electronic materials field.
A journal of The Minerals, Metals & Materials Society.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
