Dissecting spacer induced membrane deformation and fluid hydraulic behavior in reverse osmosis

Feed spacer is a key component of the spiral wound membrane module. However, the membrane deformation induced by the feed spacer under high pressure presents a significant challenge to long-term operation of reverse osmosis (RO) membrane. This deformation alters the fluid hydraulic behavior within the feed channel and its underlying mechanism remains elusive. In this study, the computational fluid dynamics (CFD) simulation was conducted to illustrate the impact of the feed spacer geometry on membrane deformation under high pressure and the resultant changes in hydraulic performances. The simulated results revealed that an increase in the mesh angle and a reduction in the filament diameter and length, led to a higher degree of membrane deformation. In addition, larger mesh angles and filament diameters, and shorter the filament lengths could significantly enhance the performance of the spiral wound membrane (SWM) module. This study provides an insight for the design of feed spacer to optimize the performance of reverse osmosis membrane module.