Evaluation of volumetric threshold shear strain of gravel-sand mixtures in centrifuge model tests

A series of dynamic centrifuge modeling tests were conducted to evaluate the volumetric threshold shear strain of loose gravel-sand mixtures composed of various ratios of gravel and sand by weight. The maximum and minimum void ratios of the mixtures were evaluated, and the optimum packing condition was determined when the mixture contained approximately 60–70 % gravel by weight. A total of six centrifuge modeling tests were performed at 50-g centrifuge gravitational acceleration. Each centrifuge model was subjected to six shaking events consisting of uniform sinusoidal motions with various amplitudes and numbers of cycles. During the entire duration of the test, the development of excess pore water pressure and settlement was monitored. Empirical relationships of pore water pressure ratio and shear strains were developed for these mixtures. The development of excess pore water pressure in the mixtures with greater than 60 % gravel exhibits transient behavior, while residual excess pore water pressure was observed in the mixtures with less than 60 % gravel. Based on the results, the volumetric threshold strain evaluated from the generation of pore water pressure and volume change during shaking is similar. The values were found to be in a range of 0.03–0.10 % and are influenced by soil composition. The threshold strain increases as the amount of gravel in the soil mixture increases.