Effect of high-strength SCC with and without steel fibres on the shear behaviour of dry joints in PCSBs

The structural behaviour of precast concrete segmental bridges (PCSBs) heavily relies on the strength of the joints between segments. Multi-keyed dry joints are currently the most commonly used solution in these discontinuity zones. Employing high-strength concrete is becoming increasingly common in civil engineering given its higher strength and improved durability. It specifically allows higher prestressing levels in PCSBs. Using self-compacting concrete enhances workability and adding steel fibres improves mechanical properties. The existing scientific literature includes experimental tests to analyse the shear behaviour of castellated dry joints in different concrete types. However, no experimental tests appear specifically for the castellated dry joints made with high-strength self-compacting concrete (HS-SCC) with and without steel fibres. Therefore, this experimental study conducted 31 push-off-type tests to analyse the behaviour and shear capacity of dry joints made of HS-SCC by investigating the influence of adding steel fibres to the concrete mix. The study examined crack patterns, load-displacement behaviour, failure modes and different (cracking, ultimate and residual) loads. The addition of steel fibres improved joints’ shear capacity. However, brittle behaviour was observed after reaching ultimate load when using HS-SCC, even when steel fibres were added to the concrete mix. Finally, the adequacy of existing formulations was analysed. Standard AASHTO proved to be on the unsafe side for the castellated dry joints specimens made of HS-SCC without steel fibres, and provided a good approximation for the specimens with steel fibres.