Vat photopolymerization 3D printing optimization: Analysis of print conditions and print quality for complex geometries and ocular applications.

3D printing, also known as additive manufacturing, continues to reshape manufacturing paradigms in healthcare by providing customized on-demand object fabrication. However, stereolithography-based 3D printers encounter a conflict between optimizing printing parameters, requiring more time, and print efficiency, requiring less time. Moreover, commonly used metrics to assess shape fidelity of 3D printed hydrogel materials like 'circularity' and 'printability' are limited by the soft nature of hydrogels, that can cause irregularities in their boundary. To unlock the full potential of 3D printing of biomaterials, it is also necessary to understand correlation between printing parameters and ink properties. In this work, a method based on curing depth, overcuring (cumulative cure), and print thickness was developed, which enables a time-efficient and reliable determination of printing conditions for complex geometries using gelatin methacrylate hydrogel biomaterial ink. We also examined the impact of printing direction on the print quality in terms of object/print thickness and aspect ratio. Moreover, the effects of dye concentration, exposure time, and layer thickness on print quality were evaluated, with discussions focused on the correlation between print dimension to layer thickness. Further evaluation was achieved by successfully printing bioinspired corneal stroma-like scaffold and delicate structures like a contact lens and a model eyeball, substantially expanding the scope of this method in producing high-quality prints with intricate details. We also demonstrate the effectiveness of 'Feret ratio,' another measure of object shape, in assessing the shape fidelity of different prints. Overall, the results highlight the practical potential of this method in enhancing the speed and reliability of the 3D printing processes involving complex geometries using a low-cost 3D printers.