Design of a Low-cost Radiation Weather Station.

Abstract: Combining a traditional weather station with radiation monitors draws the public's attention to the magnitude of background radiation and its typical variation while providing early indications of unplanned radiological releases, such as nuclear power plant accidents or terrorist acts. Several networks of combined weather and radiation monitoring sensors exist, but these fail to be affordable for broad distribution. This work involves creating an affordable system to accumulate data from multiple locations into a single open-source database. The data collected should thus serve as a friendly database for high school students. The system is designed around an inexpensive sensor package featuring a cup anemometer, wind direction vane, and tip bucket rain gauge. A Raspberry Pi 4 microcomputer interfaces through RJ11 and RJ45 connectors to these and other sensors. Custom-designed circuits were implemented on printed circuit boards supporting sensor chips for temperature, pressure, humidity, and air electrical resistance. The outdoor board communicates with ultraviolet light, soil moisture, and temperature sensors, relaying data using wired connections indoors where a Raspberry Pi 4 and indoor circuit board are located. The indoor board employs wireless internet protocol to communicate with a homemade Geiger-Mueller counter and a consumer-grade temporal radon monitor. The system employs an internet connection to transfer data to a cloud-based storage system. This enables a website with continuously updated pages dedicated to each established system to display collected data. Weatherproofed fused filament fabricated indoor and outdoor cases were designed. Sensor functions were tested for functionality and accuracy.