Dan Xu , Xinyuan Zhou , Taolin Yu , Jiale Wei , Fujia Ben , Wenjie Zhao
{"title":"具有 Bi(In1/2(Li0.5Ta0.5)1/2)O3 修饰的 A 位空位调制 BaTiO3 陶瓷的相组成、介电性能和储能性能","authors":"Dan Xu , Xinyuan Zhou , Taolin Yu , Jiale Wei , Fujia Ben , Wenjie Zhao","doi":"10.1016/j.ceramint.2024.09.392","DOIUrl":null,"url":null,"abstract":"<div><div>The (1-x)Ba<sub>0.94</sub>Ce<sub>0.04</sub>TiO<sub>3</sub>-xBi(In<sub>1/2</sub>(Li<sub>0.5</sub>Ta<sub>0.5</sub>)<sub>1/2</sub>)O<sub>3</sub> (BCT-BILT) relaxor ferroelectric ceramic system was explored based on the A-site vacancy design and defect dipole engineering. The impacts of different doping concentrations on the phase composition, dielectric and energy storage performance of the BCT-BILT ceramics were studied and discussed in detail. The pure BCT and 0.95BCT-0.05BILT samples exhibited a mixed crystal structure of tetragonal (T) and pseudo-cubic (PC) phase, while the BCT-BILT samples with x > 0.05 possessed a cubic (C) phase, accompanied by the secondary phases of BaBi<sub>2</sub>Ta<sub>2</sub>O<sub>9</sub> and BaTa<sub>2</sub>O<sub>6</sub>. With an increase in the BILT doping concentration, the surface morphologies of the ceramics were continuously modulated, and the dielectric loss had been reduced to 0.001 at 1 kHz, which was beneficial to improve the energy storage properties. Compared to the pure BCT, the breakdown field strength was significantly enhanced owing to the formation of Aurivillius phase BaBi<sub>2</sub>Ta<sub>2</sub>O<sub>9</sub> and the increased dielectric relaxation. Ultimately, the highest energy storage density of <em>W</em><sub>rec</sub> = 0.7 J/cm<sup>3</sup> and high energy conversion efficiency of <em>η</em> = 95 % was realized at the composition of x = 0.05 under a small electric field of 130 kV/cm. Furthermore, the good temperature stability with the Δ<em>W</em><sub>rec</sub>/<em>W</em><sub>rec30°C</sub> < 9 % and Δ<em>η</em>/<em>η</em><sub>30°C</sub> < 6.5 % was acquired for the samples with x = 0.20–0.30 in the temperature range of 30–120 °C, owing to the synergistic roles of the defect dipoles, impurities BaBi<sub>2</sub>Ta<sub>2</sub>O<sub>9</sub>, and polar nanoregions (PNRs). The 0.95BCT-0.05BILT ceramic obtains discharge energy density <em>W</em><sub>dis</sub> of 0.35 J/cm<sup>3</sup> and fast discharge speed <em>t</em><sub>0.9</sub> of 312 ns at 60 kV/cm, current density <em>C</em><sub>D</sub> of 255.4 A/cm<sup>2</sup> and power density <em>P</em><sub>D</sub> of 10.2 MW/cm<sup>3</sup> at 80 kV/cm. This work is of guiding significance for designing and optimizing energy storage performance of lead-free relaxors from the perspective of defect building and engineering.</div></div>","PeriodicalId":267,"journal":{"name":"Ceramics International","volume":"50 23","pages":"Pages 50469-50483"},"PeriodicalIF":5.1000,"publicationDate":"2024-09-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"The phase composition, dielectric, and energy storage performance of A-site vacancy modulated BaTiO3 ceramics with Bi(In1/2(Li0.5Ta0.5)1/2)O3 modification\",\"authors\":\"Dan Xu , Xinyuan Zhou , Taolin Yu , Jiale Wei , Fujia Ben , Wenjie Zhao\",\"doi\":\"10.1016/j.ceramint.2024.09.392\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>The (1-x)Ba<sub>0.94</sub>Ce<sub>0.04</sub>TiO<sub>3</sub>-xBi(In<sub>1/2</sub>(Li<sub>0.5</sub>Ta<sub>0.5</sub>)<sub>1/2</sub>)O<sub>3</sub> (BCT-BILT) relaxor ferroelectric ceramic system was explored based on the A-site vacancy design and defect dipole engineering. The impacts of different doping concentrations on the phase composition, dielectric and energy storage performance of the BCT-BILT ceramics were studied and discussed in detail. The pure BCT and 0.95BCT-0.05BILT samples exhibited a mixed crystal structure of tetragonal (T) and pseudo-cubic (PC) phase, while the BCT-BILT samples with x > 0.05 possessed a cubic (C) phase, accompanied by the secondary phases of BaBi<sub>2</sub>Ta<sub>2</sub>O<sub>9</sub> and BaTa<sub>2</sub>O<sub>6</sub>. With an increase in the BILT doping concentration, the surface morphologies of the ceramics were continuously modulated, and the dielectric loss had been reduced to 0.001 at 1 kHz, which was beneficial to improve the energy storage properties. Compared to the pure BCT, the breakdown field strength was significantly enhanced owing to the formation of Aurivillius phase BaBi<sub>2</sub>Ta<sub>2</sub>O<sub>9</sub> and the increased dielectric relaxation. Ultimately, the highest energy storage density of <em>W</em><sub>rec</sub> = 0.7 J/cm<sup>3</sup> and high energy conversion efficiency of <em>η</em> = 95 % was realized at the composition of x = 0.05 under a small electric field of 130 kV/cm. Furthermore, the good temperature stability with the Δ<em>W</em><sub>rec</sub>/<em>W</em><sub>rec30°C</sub> < 9 % and Δ<em>η</em>/<em>η</em><sub>30°C</sub> < 6.5 % was acquired for the samples with x = 0.20–0.30 in the temperature range of 30–120 °C, owing to the synergistic roles of the defect dipoles, impurities BaBi<sub>2</sub>Ta<sub>2</sub>O<sub>9</sub>, and polar nanoregions (PNRs). The 0.95BCT-0.05BILT ceramic obtains discharge energy density <em>W</em><sub>dis</sub> of 0.35 J/cm<sup>3</sup> and fast discharge speed <em>t</em><sub>0.9</sub> of 312 ns at 60 kV/cm, current density <em>C</em><sub>D</sub> of 255.4 A/cm<sup>2</sup> and power density <em>P</em><sub>D</sub> of 10.2 MW/cm<sup>3</sup> at 80 kV/cm. This work is of guiding significance for designing and optimizing energy storage performance of lead-free relaxors from the perspective of defect building and engineering.</div></div>\",\"PeriodicalId\":267,\"journal\":{\"name\":\"Ceramics International\",\"volume\":\"50 23\",\"pages\":\"Pages 50469-50483\"},\"PeriodicalIF\":5.1000,\"publicationDate\":\"2024-09-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Ceramics International\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0272884224044274\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, CERAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Ceramics International","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0272884224044274","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, CERAMICS","Score":null,"Total":0}
The phase composition, dielectric, and energy storage performance of A-site vacancy modulated BaTiO3 ceramics with Bi(In1/2(Li0.5Ta0.5)1/2)O3 modification
The (1-x)Ba0.94Ce0.04TiO3-xBi(In1/2(Li0.5Ta0.5)1/2)O3 (BCT-BILT) relaxor ferroelectric ceramic system was explored based on the A-site vacancy design and defect dipole engineering. The impacts of different doping concentrations on the phase composition, dielectric and energy storage performance of the BCT-BILT ceramics were studied and discussed in detail. The pure BCT and 0.95BCT-0.05BILT samples exhibited a mixed crystal structure of tetragonal (T) and pseudo-cubic (PC) phase, while the BCT-BILT samples with x > 0.05 possessed a cubic (C) phase, accompanied by the secondary phases of BaBi2Ta2O9 and BaTa2O6. With an increase in the BILT doping concentration, the surface morphologies of the ceramics were continuously modulated, and the dielectric loss had been reduced to 0.001 at 1 kHz, which was beneficial to improve the energy storage properties. Compared to the pure BCT, the breakdown field strength was significantly enhanced owing to the formation of Aurivillius phase BaBi2Ta2O9 and the increased dielectric relaxation. Ultimately, the highest energy storage density of Wrec = 0.7 J/cm3 and high energy conversion efficiency of η = 95 % was realized at the composition of x = 0.05 under a small electric field of 130 kV/cm. Furthermore, the good temperature stability with the ΔWrec/Wrec30°C < 9 % and Δη/η30°C < 6.5 % was acquired for the samples with x = 0.20–0.30 in the temperature range of 30–120 °C, owing to the synergistic roles of the defect dipoles, impurities BaBi2Ta2O9, and polar nanoregions (PNRs). The 0.95BCT-0.05BILT ceramic obtains discharge energy density Wdis of 0.35 J/cm3 and fast discharge speed t0.9 of 312 ns at 60 kV/cm, current density CD of 255.4 A/cm2 and power density PD of 10.2 MW/cm3 at 80 kV/cm. This work is of guiding significance for designing and optimizing energy storage performance of lead-free relaxors from the perspective of defect building and engineering.
期刊介绍:
Ceramics International covers the science of advanced ceramic materials. The journal encourages contributions that demonstrate how an understanding of the basic chemical and physical phenomena may direct materials design and stimulate ideas for new or improved processing techniques, in order to obtain materials with desired structural features and properties.
Ceramics International covers oxide and non-oxide ceramics, functional glasses, glass ceramics, amorphous inorganic non-metallic materials (and their combinations with metal and organic materials), in the form of particulates, dense or porous bodies, thin/thick films and laminated, graded and composite structures. Process related topics such as ceramic-ceramic joints or joining ceramics with dissimilar materials, as well as surface finishing and conditioning are also covered. Besides traditional processing techniques, manufacturing routes of interest include innovative procedures benefiting from externally applied stresses, electromagnetic fields and energetic beams, as well as top-down and self-assembly nanotechnology approaches. In addition, the journal welcomes submissions on bio-inspired and bio-enabled materials designs, experimentally validated multi scale modelling and simulation for materials design, and the use of the most advanced chemical and physical characterization techniques of structure, properties and behaviour.
Technologically relevant low-dimensional systems are a particular focus of Ceramics International. These include 0, 1 and 2-D nanomaterials (also covering CNTs, graphene and related materials, and diamond-like carbons), their nanocomposites, as well as nano-hybrids and hierarchical multifunctional nanostructures that might integrate molecular, biological and electronic components.