Bo Li , Yizheng He , Zhen Shi , Wang Jian , Nannan Wang , Yapeng Zhang
{"title":"不同压裂层序条件下煤岩复合储层水力裂缝的互馈与压裂效应","authors":"Bo Li , Yizheng He , Zhen Shi , Wang Jian , Nannan Wang , Yapeng Zhang","doi":"10.1016/j.ijrmms.2024.105968","DOIUrl":null,"url":null,"abstract":"<div><div>Multistage fractures in different reservoirs exhibit competitive extension and mutual feeding mechanisms under different fracturing sequence conditions. To better understand these mechanisms for a more efficient extraction of mine gases, a combination of true triaxial physical tests and numerical simulation was performed in this study. The expansion process of hydraulic fractures in different layers and the comprehensive effect of fracturing were analyzed. The directional deflection effect of the induced stress field on the hydraulic fractures can be summarized as follows. In terms of their behavioral pattern, the fractures in the rock seam extended “in the direction of maximum geo-stress and then deflected toward the interface.” The fracture behavior in the coal seams could be divided into two patterns: “deflection toward the interface and then extension along the direction of maximum geo-stress” and “deviation from the interface and then extension along the direction of maximum geo-stress.” The mutual feedback between the fractures manifested in the form of fracture “phase direction” in the case of stratified fracturing and “phase back” in the case of simultaneous fracturing, i.e., the fracture behaviors in the rock seams and in the first type of coal seams were promoted whereas the fracture behavior was inhibited in the second type of coal seams. In addition, the second fracturing process could be characterized by an increase in the fracture initiation pressure, a decrease in the rate of pressure drop, an increase in the fracture extension duration, and a decrease in the fracture width. When using a fracturing sequence of rock followed by coal, the formation of the seam network structure was found to be more favorable. When using a fracturing sequence of coal followed by rock, it was necessary to continue the injection of the hydraulic fluid into the first fracture during the second fracturing process, so as to obtain a higher fracturing yield. This research provides a certain theoretical support for the efficient co-exploitation of three gases, namely coalbed methane, tight gas, and shale gas, from coal composite reservoirs and in the prevention of gas disasters.</div></div>","PeriodicalId":54941,"journal":{"name":"International Journal of Rock Mechanics and Mining Sciences","volume":"184 ","pages":"Article 105968"},"PeriodicalIF":7.0000,"publicationDate":"2024-11-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Mutual feedback and fracturing effect of hydraulic fractures in composite coal−rock reservoirs under different fracturing layer sequence conditions\",\"authors\":\"Bo Li , Yizheng He , Zhen Shi , Wang Jian , Nannan Wang , Yapeng Zhang\",\"doi\":\"10.1016/j.ijrmms.2024.105968\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>Multistage fractures in different reservoirs exhibit competitive extension and mutual feeding mechanisms under different fracturing sequence conditions. To better understand these mechanisms for a more efficient extraction of mine gases, a combination of true triaxial physical tests and numerical simulation was performed in this study. The expansion process of hydraulic fractures in different layers and the comprehensive effect of fracturing were analyzed. The directional deflection effect of the induced stress field on the hydraulic fractures can be summarized as follows. In terms of their behavioral pattern, the fractures in the rock seam extended “in the direction of maximum geo-stress and then deflected toward the interface.” The fracture behavior in the coal seams could be divided into two patterns: “deflection toward the interface and then extension along the direction of maximum geo-stress” and “deviation from the interface and then extension along the direction of maximum geo-stress.” The mutual feedback between the fractures manifested in the form of fracture “phase direction” in the case of stratified fracturing and “phase back” in the case of simultaneous fracturing, i.e., the fracture behaviors in the rock seams and in the first type of coal seams were promoted whereas the fracture behavior was inhibited in the second type of coal seams. In addition, the second fracturing process could be characterized by an increase in the fracture initiation pressure, a decrease in the rate of pressure drop, an increase in the fracture extension duration, and a decrease in the fracture width. When using a fracturing sequence of rock followed by coal, the formation of the seam network structure was found to be more favorable. When using a fracturing sequence of coal followed by rock, it was necessary to continue the injection of the hydraulic fluid into the first fracture during the second fracturing process, so as to obtain a higher fracturing yield. This research provides a certain theoretical support for the efficient co-exploitation of three gases, namely coalbed methane, tight gas, and shale gas, from coal composite reservoirs and in the prevention of gas disasters.</div></div>\",\"PeriodicalId\":54941,\"journal\":{\"name\":\"International Journal of Rock Mechanics and Mining Sciences\",\"volume\":\"184 \",\"pages\":\"Article 105968\"},\"PeriodicalIF\":7.0000,\"publicationDate\":\"2024-11-16\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International Journal of Rock Mechanics and Mining Sciences\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S1365160924003332\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, GEOLOGICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Rock Mechanics and Mining Sciences","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1365160924003332","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, GEOLOGICAL","Score":null,"Total":0}
Mutual feedback and fracturing effect of hydraulic fractures in composite coal−rock reservoirs under different fracturing layer sequence conditions
Multistage fractures in different reservoirs exhibit competitive extension and mutual feeding mechanisms under different fracturing sequence conditions. To better understand these mechanisms for a more efficient extraction of mine gases, a combination of true triaxial physical tests and numerical simulation was performed in this study. The expansion process of hydraulic fractures in different layers and the comprehensive effect of fracturing were analyzed. The directional deflection effect of the induced stress field on the hydraulic fractures can be summarized as follows. In terms of their behavioral pattern, the fractures in the rock seam extended “in the direction of maximum geo-stress and then deflected toward the interface.” The fracture behavior in the coal seams could be divided into two patterns: “deflection toward the interface and then extension along the direction of maximum geo-stress” and “deviation from the interface and then extension along the direction of maximum geo-stress.” The mutual feedback between the fractures manifested in the form of fracture “phase direction” in the case of stratified fracturing and “phase back” in the case of simultaneous fracturing, i.e., the fracture behaviors in the rock seams and in the first type of coal seams were promoted whereas the fracture behavior was inhibited in the second type of coal seams. In addition, the second fracturing process could be characterized by an increase in the fracture initiation pressure, a decrease in the rate of pressure drop, an increase in the fracture extension duration, and a decrease in the fracture width. When using a fracturing sequence of rock followed by coal, the formation of the seam network structure was found to be more favorable. When using a fracturing sequence of coal followed by rock, it was necessary to continue the injection of the hydraulic fluid into the first fracture during the second fracturing process, so as to obtain a higher fracturing yield. This research provides a certain theoretical support for the efficient co-exploitation of three gases, namely coalbed methane, tight gas, and shale gas, from coal composite reservoirs and in the prevention of gas disasters.
期刊介绍:
The International Journal of Rock Mechanics and Mining Sciences focuses on original research, new developments, site measurements, and case studies within the fields of rock mechanics and rock engineering. Serving as an international platform, it showcases high-quality papers addressing rock mechanics and the application of its principles and techniques in mining and civil engineering projects situated on or within rock masses. These projects encompass a wide range, including slopes, open-pit mines, quarries, shafts, tunnels, caverns, underground mines, metro systems, dams, hydro-electric stations, geothermal energy, petroleum engineering, and radioactive waste disposal. The journal welcomes submissions on various topics, with particular interest in theoretical advancements, analytical and numerical methods, rock testing, site investigation, and case studies.