Performance of sandwich type fire-resistant flexible composite phase change material PEE@EBF for battery thermal management and runaway protection

To mitigate the risks of overheating and thermal runaway in lithium-ion batteries, this study proposes a novel sandwich-type fire-resistant flexible composite phase change material (CPCM), referred to as PEE@EBF. The core material (PEE) was created by melt-blending paraffin wax (PW), expanded graphite (EG), and ethylene–vinyl acetate copolymer (EVA). The outer layer, a fire-resistant coating (EBF), was applied to the surface of PEE and consists of epoxy resin (EP), boron nitride (BN), and the composite flame retardant (CFR). Test results demonstrated that PEE@EBF maintained structural integrity, exhibiting no significant deformation or leakage after being heated at 80 °C for 5 h. PEE@EBF also displayed a high latent heat of 166.6 J/g, thermal conductivity of 0.8 W/(m∙K), and excellent electrical insulation properties. Furthermore, it achieved a UL94 V-0 flame retardant rating, with notable reductions in peak heat release rate (PHRR) and peak smoke production rate (PSPR) by 67.8 % and 81.8 %, respectively. During long-term cycling at 4C, the peak temperature (PT) and maximum temperature difference (MTD) of batteries in the module incorporating PEE@EBF were reduced by 11.8 °C and 4 °C, respectively, compared to natural convection cooling. In addition, the heat generated during the battery thermal runaway was efficiently absorbed and transferred by PEE@EBF, delaying the irreversible thermal runaway process by 633 s. This indicated that the sandwich-type PEE@EBF was suitable for thermal management and fire protection in lithium-ion batteries or energy storage devices.