Solidification and crystallographic texture modeling of laser powder bed fusion Ti-6Al-4V using finite difference-monte carlo method

Laser powder bed fusion (LPBF) additive manufacturing makes near-net-shaped parts with reduced material cost and time, rising as a promising technology to fabricate Ti-6Al-4 V, a widely used titanium alloy in aerospace and medical industries. However, LPBF Ti-6Al-4 V parts produced with 67° rotation between layers, a scan strategy commonly used to reduce microstructure and property inhomogeneity, have varying grain morphologies and weak crystallographic textures that change depending on processing parameters. This study predicts LPBF Ti-6Al-4 V solidification at three energy levels using a finite difference-Monte Carlo method and validates the simulations with large-area electron backscatter diffraction (EBSD) scans. The developed model accurately shows that a 〈001〉 texture forms at low energy and a 〈111〉 texture occurs at higher energies parallel to the build direction but with a lower strength than the textures observed from EBSD. A validated and well-established method of combining spatial correlation and general spherical harmonics representation of texture is developed to calculate a difference score between simulations and experiments. The quantitative comparison enables effective fine-tuning of nucleation density $\left(N_0\right)$ input, which shows a nonlinear relationship with increasing energy level. Future improvements in texture prediction code and a more comprehensive study of $N_0$ with different energy levels will further advance the optimization of LPBF Ti-6Al-4 V components. These developments contribute a novel understanding of crystallographic texture formation in LPBF Ti-6Al-4 V, the development of robust model validation and calibration pipeline methodologies, and provide a platform for mechanical property prediction and process parameter optimization.