{"title":"考虑微电网自主性的直流微电网集群延迟容错分级分布式控制","authors":"Yongpan Chen, Jinghan Zhao, Keting Wan, Miao Yu","doi":"10.1016/j.apenergy.2024.124905","DOIUrl":null,"url":null,"abstract":"<div><div>A microgrid cluster (MGC) is formed by interconnected geographically adjacent microgrids (MGs), which can effectively improve power supply reliability. To fulfill the requirements of coordination between MGs while exerting the autonomy ability of each MG, this paper proposes a hierarchical distributed control method for DC MGCs with MG autonomous-cooperative mode switching. The proposed method can not only realize the proportional current sharing between the MGs and the voltage regulation of the common bus but also allow MGs to operate in autonomous or cooperative mode by establishing and disconnecting the inter-MG communication links. In addition, considering that the delay of inter-MG communication links affects multiple control links of the proposed control method, a delay-dependent stability analysis method based on Padé approximation and eigenvalue spectrum comparison is proposed. By stability analysis, the time delay margin (TDM) is determined, and the key link that determines the TDM is identified as the observer based on the proportional-integral (PI) consensus algorithm. On this basis, the scattering transformation (ST) is introduced to improve the stability of the observer under delay and thus enhance the TDM of DC MGCs, which is confirmed by stability analysis based on a new system model integrating node variables and edge variables. Finally, the performance of the proposed control method and stability analysis results are verified by hardware-in-loop (HIL) tests and MATLAB/Simulink simulations</div></div>","PeriodicalId":246,"journal":{"name":"Applied Energy","volume":"378 ","pages":"Article 124905"},"PeriodicalIF":10.1000,"publicationDate":"2024-11-16","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Delay-tolerant hierarchical distributed control for DC microgrid clusters considering microgrid autonomy\",\"authors\":\"Yongpan Chen, Jinghan Zhao, Keting Wan, Miao Yu\",\"doi\":\"10.1016/j.apenergy.2024.124905\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>A microgrid cluster (MGC) is formed by interconnected geographically adjacent microgrids (MGs), which can effectively improve power supply reliability. To fulfill the requirements of coordination between MGs while exerting the autonomy ability of each MG, this paper proposes a hierarchical distributed control method for DC MGCs with MG autonomous-cooperative mode switching. The proposed method can not only realize the proportional current sharing between the MGs and the voltage regulation of the common bus but also allow MGs to operate in autonomous or cooperative mode by establishing and disconnecting the inter-MG communication links. In addition, considering that the delay of inter-MG communication links affects multiple control links of the proposed control method, a delay-dependent stability analysis method based on Padé approximation and eigenvalue spectrum comparison is proposed. By stability analysis, the time delay margin (TDM) is determined, and the key link that determines the TDM is identified as the observer based on the proportional-integral (PI) consensus algorithm. On this basis, the scattering transformation (ST) is introduced to improve the stability of the observer under delay and thus enhance the TDM of DC MGCs, which is confirmed by stability analysis based on a new system model integrating node variables and edge variables. Finally, the performance of the proposed control method and stability analysis results are verified by hardware-in-loop (HIL) tests and MATLAB/Simulink simulations</div></div>\",\"PeriodicalId\":246,\"journal\":{\"name\":\"Applied Energy\",\"volume\":\"378 \",\"pages\":\"Article 124905\"},\"PeriodicalIF\":10.1000,\"publicationDate\":\"2024-11-16\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Applied Energy\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0306261924022888\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Energy","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0306261924022888","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
Delay-tolerant hierarchical distributed control for DC microgrid clusters considering microgrid autonomy
A microgrid cluster (MGC) is formed by interconnected geographically adjacent microgrids (MGs), which can effectively improve power supply reliability. To fulfill the requirements of coordination between MGs while exerting the autonomy ability of each MG, this paper proposes a hierarchical distributed control method for DC MGCs with MG autonomous-cooperative mode switching. The proposed method can not only realize the proportional current sharing between the MGs and the voltage regulation of the common bus but also allow MGs to operate in autonomous or cooperative mode by establishing and disconnecting the inter-MG communication links. In addition, considering that the delay of inter-MG communication links affects multiple control links of the proposed control method, a delay-dependent stability analysis method based on Padé approximation and eigenvalue spectrum comparison is proposed. By stability analysis, the time delay margin (TDM) is determined, and the key link that determines the TDM is identified as the observer based on the proportional-integral (PI) consensus algorithm. On this basis, the scattering transformation (ST) is introduced to improve the stability of the observer under delay and thus enhance the TDM of DC MGCs, which is confirmed by stability analysis based on a new system model integrating node variables and edge variables. Finally, the performance of the proposed control method and stability analysis results are verified by hardware-in-loop (HIL) tests and MATLAB/Simulink simulations
期刊介绍:
Applied Energy serves as a platform for sharing innovations, research, development, and demonstrations in energy conversion, conservation, and sustainable energy systems. The journal covers topics such as optimal energy resource use, environmental pollutant mitigation, and energy process analysis. It welcomes original papers, review articles, technical notes, and letters to the editor. Authors are encouraged to submit manuscripts that bridge the gap between research, development, and implementation. The journal addresses a wide spectrum of topics, including fossil and renewable energy technologies, energy economics, and environmental impacts. Applied Energy also explores modeling and forecasting, conservation strategies, and the social and economic implications of energy policies, including climate change mitigation. It is complemented by the open-access journal Advances in Applied Energy.