Mixed FEM implementation of three-point bending of the beam with an edge crack within strain gradient elasticity theory

This paper considers the problem of symmetrical three-point bending of a prismatic beam with an edge crack. The solution is obtained by the mixed finite element method within the simplified Toupin–Mindlin strain gradient elasticity theory. A mixed variational formulation of the boundary value problem for displacements–strains–stresses and their gradients is applied, simplifying the choice of approximating functions. The concept of energy balance is adopted to calculate the energy release rate with a virtual increase in crack length. The increment of the potential energy of an elastic body is determined by accounting for the strain and stress gradient contribution. Numerical calculations were performed using a quasi-uniform triangular mesh of the cross-type. The mesh refinement was applied in the vicinity of the crack tip, at the concentrated support, and the point of application of the transverse force, and uniform mesh partitioning was utilized in the rest of the beam. The fine-mesh analysis was carried out on the successively condensed meshes in the stress concentration domain for different values of the length scale parameter. The crack opening displacements and the distribution of strains and Cauchy stresses for various values of the length scale parameter are presented. An increase in this parameter increases the stiffness of the crack, which leads to a decrease in the crack opening displacements and a smooth closure of its faces at the crack tip. In addition, accounting for the scale parameter reduces the calculated values of strains and stresses near the crack tip. Based on the energy balance criterion, local fracture parameters such as the release rate of elastic energy at the crack tip and the stress intensity factor are determined for different values of the mesh step. The numerical calculations indicate the convergence of the obtained approximations. The main feature of solutions, which includes the strain gradient contribution, is the decrease in the values of the calculated parameters associated with the fracture energy compared to the classical elasticity theory.