Emulsifiers: Their Influence on the Rheological and Texture Properties in an Industrial Chocolate.

The complexity of the chocolate matrix leads to it having characteristic rheological properties that may pose difficulties for its industrial manufacture. Many factors influence the flow behaviour of chocolates, such as raw materials, the amount of fat, the moisture content, particle-size distribution, the concentration of emulsifiers, or manufacturing conditions, among others. This study focusses on the rheological properties of an industrially manufactured chocolate with a 48% cocoa content, and the effect caused by the addition of two emulsifiers (soya lecithin and polyglycerol polyricinoleate (PGPR)) on the rheological properties. In the case of lecithin, a clear effect has been observed on the plastic viscosity and the yield stress. Plastic viscosity decreases until a concentration of 0.6% lecithin is reached, and thereafter remains relatively constant, while yield stress increases over the studied range. This effect is not observed when PGPR is used as the emulsifying agent. In this case, a small concentration of PGPR decreases the yield stress. Thixotropy was determined using the Casson model, and its behaviour was found to be similar to that of plastic viscosity with respect to changes in the PGPR and lecithin concentrations. Textural determinations were also carried out, relating the rheology characteristics to the texturometry.