Electrospun hydrophilic PAN/CO/TA composite nanofibrous membrane for adsorbing Cu(II) in water

In this paper, a novel polyacrylonitrile (PAN)/collagen (CO)/tannic acid (TA) composite nanofiber membrane for the adsorption of Cu(II) in water was prepared. The nanofibrous membranes were characterized by Fourier transform infrared (FTIR), scanning electron microscopy (SEM), thermogravimetric (TG), and water contact angle (WCA) techniques, and their adsorption performance on Cu(II) in water was tested. The results showed that incorporating CO improved the hydrophilic performance of the membranes, and the contact angle of PAN/CO decreased from 60.57° to 39.16° with the increase of CO content, which exhibited good hydrophilicity. Moreover, CO effectively crosslinked TA, so that TA was well fixed on the surface of the fiber membrane, and the resulting PAN/CO/TA composite nanofiber membrane had good fiber morphology, uniform fiber diameter distribution, with an average diameter of 292.22 nm, and good adsorption performance for Cu(II), up to 133.26 mg/g. The adsorption kinetics fitting showed that the adsorption mechanism was mainly electrostatic adsorption and chelation of Cu(II) by phenoxy anion. PAN/CO/TA and PAN/CO/TA/Cu nanofiber membranes showed bacteriostatic effects on E. coli and S. aureus, with PAN/CO/TA/Cu nanofiber membranes being particularly effective, with the average inhibition bands for E. coli and S. aureus being 7.50 mm and 10.05 mm, respectively. The distribution of the electric field during the spinning process was also simulated by finite element analysis in this study. Since TA is a natural polymer of plant origin and CO is of animal origin, it provides an environmentally friendly and cost-effective method to remove Cu(II) from water.