Seismic behaviour and design of a tall mixed reinforced concrete–steel structure supporting an oil refinery reactor

This study investigates the seismic behaviour of a special mixed reinforced concrete-steel structure that supports an oil refinery reactor. The structure is 64.90 m tall and consists of three parts: (a) a reinforced concrete frame basement; (b) a steel braced frame that supports the oil reactor and (c) the steel reactor itself. A three-dimensional model of the structure is created to perform static non-linear (pushover) analyses in order to obtain the capacity curves and understand the overall inelastic behavior of the structure. The results of the pushover analyses reveal that the structure exhibits similar inelastic behavior in both horizontal directions and satisfies the capacity design principles. The structure exhibits limited ductility considering the fact that has been designed with a behavior factor of q = 1.5 and primary damages are expected mainly in concrete members. Subsequently, dynamic non-linear time-history (NLTH) analyses are performed utilizing the three translational components of three seismic motions recorded during past earthquakes. These results involve: (i) the maximum values for displacements, accelerations and base shears; (ii) the maximum stresses at critical points of the oil refining reactor and (iii) the formation of plastic hinges at columns, beams and braces of the structure. Contrary to pushover analyses, NLTH analyses revealed the development of plastic hinges, hence seismic damage, that do not follow the desirable formation pattern. Moreover, the accelerations and displacements observed are expected to cause failure of the piping and mechanical equipment, while local failure of the high-stress areas of the shell of the reactor may be possible. Localized strengthening might be necessary to avoid repair works and downtime after such seismic event.