用高熵合金改性的新型复合夹层粘接的超强韧性超级合金接头

IF 11.2 1区 材料科学 Q1 MATERIALS SCIENCE, MULTIDISCIPLINARY
L. Yuan, F.Y. Jiang, D. Hao, Y.Z. Yang, T.H. Chou, J.X. Zhang, J. Gan, J.L. Li, J.T. Xiong, T. Yang
{"title":"用高熵合金改性的新型复合夹层粘接的超强韧性超级合金接头","authors":"L. Yuan, F.Y. Jiang, D. Hao, Y.Z. Yang, T.H. Chou, J.X. Zhang, J. Gan, J.L. Li, J.T. Xiong, T. Yang","doi":"10.1016/j.jmst.2024.08.072","DOIUrl":null,"url":null,"abstract":"Diffusion bonding (DB) with interlayers is sought-after for manufacturing high-performance turbine disks of powder metallurgy (PM) superalloys with precise and intricate inner cavity structures. Developing novel interlayer materials is challenging but crucial for enhancing bonding quality and joint properties. We designed a multi-interlayer composite bonding (MICB) method, employing sandwich-structured interlayers of “BNi2/high entropy alloy (HEA)/BNi2”, to join a PM superalloy FGH98. The MICB joint exhibited an ultrahigh shear strength of ∼1132 MPa and exceptional ductility, indicating a typical ductile fracture pattern with numerous dimples. Owing to the introduction of liquid BNi2 interlayer, initial bonding interfaces were eliminated and replaced by newborn grain boundaries (GBs), preventing brittle interfacial fracture. Due to the diffusion of Al/Ti/Ta from the base metals (BMs), massive ordered γ' nanoparticles also precipitated in the joint. Moreover, the addition of HEA foil reduced the stacking fault energy (SFE) of the joint and facilitated the formation of deformation twins (DTs). Thus, during the deformation process, the γ' nanoparticles, and multiple substructures like stacking faults (SFs), Lomer-Cottrell (L-C) locks, DTs, and 9R phases enhanced the work-hardening capability and strengthened the joint. Simultaneously, the multiplication and interaction of DTs induced a softening mechanism of dynamic recrystallization (DRX) during the entire deformation process and dominated when the plastic instability occurred, resulting in numerous adiabatic shear bands (ASBs) consisting of γ/γ' nano-bands, which indicates a significant improvement of the joint ductility.","PeriodicalId":16154,"journal":{"name":"Journal of Materials Science & Technology","volume":"46 1","pages":""},"PeriodicalIF":11.2000,"publicationDate":"2024-11-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Ultrastrong and ductile superalloy joints bonded with a novel composite interlayer modified by high entropy alloy\",\"authors\":\"L. Yuan, F.Y. Jiang, D. Hao, Y.Z. Yang, T.H. Chou, J.X. Zhang, J. Gan, J.L. Li, J.T. Xiong, T. Yang\",\"doi\":\"10.1016/j.jmst.2024.08.072\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Diffusion bonding (DB) with interlayers is sought-after for manufacturing high-performance turbine disks of powder metallurgy (PM) superalloys with precise and intricate inner cavity structures. Developing novel interlayer materials is challenging but crucial for enhancing bonding quality and joint properties. We designed a multi-interlayer composite bonding (MICB) method, employing sandwich-structured interlayers of “BNi2/high entropy alloy (HEA)/BNi2”, to join a PM superalloy FGH98. The MICB joint exhibited an ultrahigh shear strength of ∼1132 MPa and exceptional ductility, indicating a typical ductile fracture pattern with numerous dimples. Owing to the introduction of liquid BNi2 interlayer, initial bonding interfaces were eliminated and replaced by newborn grain boundaries (GBs), preventing brittle interfacial fracture. Due to the diffusion of Al/Ti/Ta from the base metals (BMs), massive ordered γ' nanoparticles also precipitated in the joint. Moreover, the addition of HEA foil reduced the stacking fault energy (SFE) of the joint and facilitated the formation of deformation twins (DTs). Thus, during the deformation process, the γ' nanoparticles, and multiple substructures like stacking faults (SFs), Lomer-Cottrell (L-C) locks, DTs, and 9R phases enhanced the work-hardening capability and strengthened the joint. Simultaneously, the multiplication and interaction of DTs induced a softening mechanism of dynamic recrystallization (DRX) during the entire deformation process and dominated when the plastic instability occurred, resulting in numerous adiabatic shear bands (ASBs) consisting of γ/γ' nano-bands, which indicates a significant improvement of the joint ductility.\",\"PeriodicalId\":16154,\"journal\":{\"name\":\"Journal of Materials Science & Technology\",\"volume\":\"46 1\",\"pages\":\"\"},\"PeriodicalIF\":11.2000,\"publicationDate\":\"2024-11-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Materials Science & Technology\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1016/j.jmst.2024.08.072\",\"RegionNum\":1,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Materials Science & Technology","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1016/j.jmst.2024.08.072","RegionNum":1,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

使用中间膜进行扩散粘接(DB)是制造具有精密复杂内腔结构的高性能粉末冶金(PM)超合金涡轮盘的理想方法。开发新型夹层材料具有挑战性,但对于提高粘接质量和接头性能至关重要。我们设计了一种多夹层复合键合(MICB)方法,采用 "BNi2/高熵合金(HEA)/BNi2 "夹层结构夹层来连接粉末超合金 FGH98。MICB 接头显示出 1132 兆帕斯卡的超高剪切强度和优异的延展性,呈现出具有大量凹坑的典型韧性断裂模式。由于引入了液态 BNi2 夹层,最初的结合界面被消除,取而代之的是新生的晶界 (GB),从而防止了脆性界面断裂。由于 Al/Ti/Ta 从贱金属 (BM) 中扩散,接合处也析出了大量有序的 γ'纳米颗粒。此外,HEA 箔的加入降低了接头的堆叠断层能 (SFE),促进了变形孪晶 (DT) 的形成。因此,在变形过程中,γ'纳米颗粒以及堆叠断层(SFs)、Lomer-Cottrell(L-C)锁扣、DTs 和 9R 相等多种亚结构增强了加工硬化能力,并强化了接头。同时,在整个变形过程中,DTs 的增殖和相互作用诱导了动态再结晶(DRX)软化机制,并在塑性不稳定性发生时占据主导地位,从而产生了大量由 γ/γ' 纳米带组成的绝热剪切带(ASBs),这表明接头的延展性得到了显著改善。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

Ultrastrong and ductile superalloy joints bonded with a novel composite interlayer modified by high entropy alloy

Ultrastrong and ductile superalloy joints bonded with a novel composite interlayer modified by high entropy alloy
Diffusion bonding (DB) with interlayers is sought-after for manufacturing high-performance turbine disks of powder metallurgy (PM) superalloys with precise and intricate inner cavity structures. Developing novel interlayer materials is challenging but crucial for enhancing bonding quality and joint properties. We designed a multi-interlayer composite bonding (MICB) method, employing sandwich-structured interlayers of “BNi2/high entropy alloy (HEA)/BNi2”, to join a PM superalloy FGH98. The MICB joint exhibited an ultrahigh shear strength of ∼1132 MPa and exceptional ductility, indicating a typical ductile fracture pattern with numerous dimples. Owing to the introduction of liquid BNi2 interlayer, initial bonding interfaces were eliminated and replaced by newborn grain boundaries (GBs), preventing brittle interfacial fracture. Due to the diffusion of Al/Ti/Ta from the base metals (BMs), massive ordered γ' nanoparticles also precipitated in the joint. Moreover, the addition of HEA foil reduced the stacking fault energy (SFE) of the joint and facilitated the formation of deformation twins (DTs). Thus, during the deformation process, the γ' nanoparticles, and multiple substructures like stacking faults (SFs), Lomer-Cottrell (L-C) locks, DTs, and 9R phases enhanced the work-hardening capability and strengthened the joint. Simultaneously, the multiplication and interaction of DTs induced a softening mechanism of dynamic recrystallization (DRX) during the entire deformation process and dominated when the plastic instability occurred, resulting in numerous adiabatic shear bands (ASBs) consisting of γ/γ' nano-bands, which indicates a significant improvement of the joint ductility.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of Materials Science & Technology
Journal of Materials Science & Technology 工程技术-材料科学:综合
CiteScore
20.00
自引率
11.00%
发文量
995
审稿时长
13 days
期刊介绍: Journal of Materials Science & Technology strives to promote global collaboration in the field of materials science and technology. It primarily publishes original research papers, invited review articles, letters, research notes, and summaries of scientific achievements. The journal covers a wide range of materials science and technology topics, including metallic materials, inorganic nonmetallic materials, and composite materials.
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信