Post-localized blast experimental investigation of mechanical properties and microstructural evolutions in austenitic stainless steel 316L

Mechanical loading causes material deformation, resulting in changes in mechanical properties due to microstructural alterations such as the multiplication of dislocations and evolution of grain morphology. Blast loading, a condition where materials deform at high strain rates, results in significant plastic deformation. This rapid deformation induces intense mechanical stresses, causing complex microstructural changes that influence the mechanical behavior and performance of the materials. Consequently, designing structures to withstand blast loading requires understanding the relationship between microstructure and property evolution. As the primary objective of this study, post-localized blast experiments have been conducted to elucidate the variability in microstructural response of Austenitic stainless steel (ASS) 316 L, characterized by its face-centered cubic crystal structure. Localized blast loads were applied to square test plates, 2 mm thick, with a circular exposed area of 106 mm in diameter. Quantitative mechanical property data from key zones within the deformed dome were determined through using a novel micro-tensile testing approach and nanoindentation tests. Electron backscatter diffraction (EBSD) in scanning electron microscopy (SEM) technique was employed to characterize the microstructural changes in the selected samples. The results revealed that blast loading induced complex mechanical and microstructural changes in ASS 316 L, including enhanced material strength, reduced ductility, and significant alterations in grain orientation and misorientation distributions. The materials underwent significant strain hardening due to the increased stress and deformation, resulting in a more resistant to plastic deformation and the greatest internal strain accumulations. Texture analysis underscored the influence of deformation geometry, with Goss and Copper emerging as predominant texture components.