{"title":"风对屋顶光伏电站冷却效应的研究","authors":"","doi":"10.1016/j.csite.2024.105295","DOIUrl":null,"url":null,"abstract":"<div><div>This study investigates the cooling of PV panels installed on the roof of a 5.9 MW power plant in Bursa, Turkey, under varying wind conditions. Meteorological measurements were conducted during the summer period to analyse the cooling effects. When wind speed differences were below 0.5 m/s, the cooling effect on the PV panels ranged between 2 and 3 °C. However, when the wind speed differences approached 1 m/s, the cooling effect increased up to 7 °C. At lower wind speeds, winds blowing from behind the panels provided better cooling, whereas side winds offered improved performance as wind speed increased. Due to the roof slope and the minimal gap between the panels and the roof, winds from behind were less effective, as they could not penetrate the back of the PV panels. Side winds, on the other hand, faced no difficulty in flowing over the panel surfaces but lost their cooling effect as they passed along the long rows of panels. These findings suggest that during the design phase of PV power plants, high wind speed locations should be prioritized, and optimal configurations should be implemented to ensure uniform wind access to all PV arrays.</div></div>","PeriodicalId":9658,"journal":{"name":"Case Studies in Thermal Engineering","volume":null,"pages":null},"PeriodicalIF":6.4000,"publicationDate":"2024-10-18","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Investigation of the cooling effect of wind on rooftop PV power plants\",\"authors\":\"\",\"doi\":\"10.1016/j.csite.2024.105295\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>This study investigates the cooling of PV panels installed on the roof of a 5.9 MW power plant in Bursa, Turkey, under varying wind conditions. Meteorological measurements were conducted during the summer period to analyse the cooling effects. When wind speed differences were below 0.5 m/s, the cooling effect on the PV panels ranged between 2 and 3 °C. However, when the wind speed differences approached 1 m/s, the cooling effect increased up to 7 °C. At lower wind speeds, winds blowing from behind the panels provided better cooling, whereas side winds offered improved performance as wind speed increased. Due to the roof slope and the minimal gap between the panels and the roof, winds from behind were less effective, as they could not penetrate the back of the PV panels. Side winds, on the other hand, faced no difficulty in flowing over the panel surfaces but lost their cooling effect as they passed along the long rows of panels. These findings suggest that during the design phase of PV power plants, high wind speed locations should be prioritized, and optimal configurations should be implemented to ensure uniform wind access to all PV arrays.</div></div>\",\"PeriodicalId\":9658,\"journal\":{\"name\":\"Case Studies in Thermal Engineering\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":6.4000,\"publicationDate\":\"2024-10-18\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Case Studies in Thermal Engineering\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2214157X24013261\",\"RegionNum\":2,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"THERMODYNAMICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Case Studies in Thermal Engineering","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2214157X24013261","RegionNum":2,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"THERMODYNAMICS","Score":null,"Total":0}
Investigation of the cooling effect of wind on rooftop PV power plants
This study investigates the cooling of PV panels installed on the roof of a 5.9 MW power plant in Bursa, Turkey, under varying wind conditions. Meteorological measurements were conducted during the summer period to analyse the cooling effects. When wind speed differences were below 0.5 m/s, the cooling effect on the PV panels ranged between 2 and 3 °C. However, when the wind speed differences approached 1 m/s, the cooling effect increased up to 7 °C. At lower wind speeds, winds blowing from behind the panels provided better cooling, whereas side winds offered improved performance as wind speed increased. Due to the roof slope and the minimal gap between the panels and the roof, winds from behind were less effective, as they could not penetrate the back of the PV panels. Side winds, on the other hand, faced no difficulty in flowing over the panel surfaces but lost their cooling effect as they passed along the long rows of panels. These findings suggest that during the design phase of PV power plants, high wind speed locations should be prioritized, and optimal configurations should be implemented to ensure uniform wind access to all PV arrays.
期刊介绍:
Case Studies in Thermal Engineering provides a forum for the rapid publication of short, structured Case Studies in Thermal Engineering and related Short Communications. It provides an essential compendium of case studies for researchers and practitioners in the field of thermal engineering and others who are interested in aspects of thermal engineering cases that could affect other engineering processes. The journal not only publishes new and novel case studies, but also provides a forum for the publication of high quality descriptions of classic thermal engineering problems. The scope of the journal includes case studies of thermal engineering problems in components, devices and systems using existing experimental and numerical techniques in the areas of mechanical, aerospace, chemical, medical, thermal management for electronics, heat exchangers, regeneration, solar thermal energy, thermal storage, building energy conservation, and power generation. Case studies of thermal problems in other areas will also be considered.