用商用碳化硼和 AISI M42 工具钢制造铁基薄膜金属玻璃的新方法

IF 3 Q2 MATERIALS SCIENCE, MULTIDISCIPLINARY
Sung-Tsun Wang , Jhen-De You , Bo-you Chen , Chun-Wei Chen , Jinn P. Chu , Pakman Yiu
{"title":"用商用碳化硼和 AISI M42 工具钢制造铁基薄膜金属玻璃的新方法","authors":"Sung-Tsun Wang ,&nbsp;Jhen-De You ,&nbsp;Bo-you Chen ,&nbsp;Chun-Wei Chen ,&nbsp;Jinn P. Chu ,&nbsp;Pakman Yiu","doi":"10.1016/j.mtla.2024.102255","DOIUrl":null,"url":null,"abstract":"<div><div>In this study, we report a Fe-based thin film metallic glass (Fe-Cr-Mo-C-B-X TFMG) fabricated by magnetron sputtering with commercial boron carbide (B<sub>4</sub>C) target and AISI M42 tool steel pellets. Varied number of M42 pellets were co-sputtered with B<sub>4</sub>C target, resulting in Fe content ranged from 48.1 at% to 62.8 at%. X-ray diffraction and transmission electron microscopy confirmed that all sample films were amorphous. All samples showed glass transition and crystallization in differential scanning calorimetry (DSC), similar to typical metallic glasses. However, glass transition was barely observable in B4m owing to its high oxygen content. The sample films also had extremely low surface roughness of 0.14 – 0.26 nm. The sample films also showed tribological properties comparable to conventionally deposited TFMG, where the highest hardness and reduced modulus obtained was 9.0 GPa and 150.8 GPa respectively. The sample films also demonstrated specific wear rate K<sub>0</sub> as low as 1.6 × 10<sup>–5</sup> mm<sup>3</sup>Nm<sup>-1</sup>. Our work demonstrates a more cost-effective and sustainable way of fabricating Fe-based TFMG, in which both AISI M42 are readily available and can be easily recycled after use.</div></div>","PeriodicalId":47623,"journal":{"name":"Materialia","volume":"38 ","pages":"Article 102255"},"PeriodicalIF":3.0000,"publicationDate":"2024-10-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"A novel approach to fabricate Fe-based thin film metallic glass with commercial boron carbide and AISI M42 tool steel\",\"authors\":\"Sung-Tsun Wang ,&nbsp;Jhen-De You ,&nbsp;Bo-you Chen ,&nbsp;Chun-Wei Chen ,&nbsp;Jinn P. Chu ,&nbsp;Pakman Yiu\",\"doi\":\"10.1016/j.mtla.2024.102255\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>In this study, we report a Fe-based thin film metallic glass (Fe-Cr-Mo-C-B-X TFMG) fabricated by magnetron sputtering with commercial boron carbide (B<sub>4</sub>C) target and AISI M42 tool steel pellets. Varied number of M42 pellets were co-sputtered with B<sub>4</sub>C target, resulting in Fe content ranged from 48.1 at% to 62.8 at%. X-ray diffraction and transmission electron microscopy confirmed that all sample films were amorphous. All samples showed glass transition and crystallization in differential scanning calorimetry (DSC), similar to typical metallic glasses. However, glass transition was barely observable in B4m owing to its high oxygen content. The sample films also had extremely low surface roughness of 0.14 – 0.26 nm. The sample films also showed tribological properties comparable to conventionally deposited TFMG, where the highest hardness and reduced modulus obtained was 9.0 GPa and 150.8 GPa respectively. The sample films also demonstrated specific wear rate K<sub>0</sub> as low as 1.6 × 10<sup>–5</sup> mm<sup>3</sup>Nm<sup>-1</sup>. Our work demonstrates a more cost-effective and sustainable way of fabricating Fe-based TFMG, in which both AISI M42 are readily available and can be easily recycled after use.</div></div>\",\"PeriodicalId\":47623,\"journal\":{\"name\":\"Materialia\",\"volume\":\"38 \",\"pages\":\"Article 102255\"},\"PeriodicalIF\":3.0000,\"publicationDate\":\"2024-10-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Materialia\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2589152924002527\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Materialia","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2589152924002527","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
引用次数: 0

摘要

在这项研究中,我们报告了一种铁基薄膜金属玻璃(Fe-Cr-Mo-C-B-X TFMG),它是用商用碳化硼(B4C)靶材和 AISI M42 工具钢丸料通过磁控溅射制造的。不同数量的 M42 钢丸与 B4C 靶材共同溅射,导致铁含量从 48.1 at% 到 62.8 at% 不等。X 射线衍射和透射电子显微镜证实,所有样品薄膜都是无定形的。在差示扫描量热法(DSC)中,所有样品都出现了玻璃化转变和结晶现象,与典型的金属玻璃类似。不过,由于 B4m 的含氧量较高,几乎观察不到玻璃化转变。样品薄膜的表面粗糙度也极低,仅为 0.14 - 0.26 nm。样品薄膜还显示出与传统沉积 TFMG 相当的摩擦学特性,其中获得的最高硬度和还原模量分别为 9.0 GPa 和 150.8 GPa。样品薄膜的比磨损率 K0 也低至 1.6 × 10-5 mm3Nm-1。我们的工作展示了一种更具成本效益和可持续性的制造铁基 TFMG 的方法,其中 AISI M42 都很容易获得,使用后也很容易回收。
本文章由计算机程序翻译,如有差异,请以英文原文为准。

A novel approach to fabricate Fe-based thin film metallic glass with commercial boron carbide and AISI M42 tool steel

A novel approach to fabricate Fe-based thin film metallic glass with commercial boron carbide and AISI M42 tool steel
In this study, we report a Fe-based thin film metallic glass (Fe-Cr-Mo-C-B-X TFMG) fabricated by magnetron sputtering with commercial boron carbide (B4C) target and AISI M42 tool steel pellets. Varied number of M42 pellets were co-sputtered with B4C target, resulting in Fe content ranged from 48.1 at% to 62.8 at%. X-ray diffraction and transmission electron microscopy confirmed that all sample films were amorphous. All samples showed glass transition and crystallization in differential scanning calorimetry (DSC), similar to typical metallic glasses. However, glass transition was barely observable in B4m owing to its high oxygen content. The sample films also had extremely low surface roughness of 0.14 – 0.26 nm. The sample films also showed tribological properties comparable to conventionally deposited TFMG, where the highest hardness and reduced modulus obtained was 9.0 GPa and 150.8 GPa respectively. The sample films also demonstrated specific wear rate K0 as low as 1.6 × 10–5 mm3Nm-1. Our work demonstrates a more cost-effective and sustainable way of fabricating Fe-based TFMG, in which both AISI M42 are readily available and can be easily recycled after use.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Materialia
Materialia MATERIALS SCIENCE, MULTIDISCIPLINARY-
CiteScore
6.40
自引率
2.90%
发文量
345
审稿时长
36 days
期刊介绍: Materialia is a multidisciplinary journal of materials science and engineering that publishes original peer-reviewed research articles. Articles in Materialia advance the understanding of the relationship between processing, structure, property, and function of materials. Materialia publishes full-length research articles, review articles, and letters (short communications). In addition to receiving direct submissions, Materialia also accepts transfers from Acta Materialia, Inc. partner journals. Materialia offers authors the choice to publish on an open access model (with author fee), or on a subscription model (with no author fee).
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信