通过原位感应后加热提高异种钢 A-TIG 焊点的机械性能

IF 1.9 Q3 ENGINEERING, MANUFACTURING
Pratishtha Sharma , Dheerendra Kumar Dwivedi
{"title":"通过原位感应后加热提高异种钢 A-TIG 焊点的机械性能","authors":"Pratishtha Sharma ,&nbsp;Dheerendra Kumar Dwivedi","doi":"10.1016/j.mfglet.2024.09.201","DOIUrl":null,"url":null,"abstract":"<div><div>An approach is proposed to enhance the mechanical properties (ductility and impact toughness) of dissimilar martensitic steel-austenitic stainless steel joint by ‘A-TIG welding with induction post-heating (A-TIG<sub>(I)</sub> welding)’. The A-TIG<sub>(I)</sub> welding mitigates the martensite formation and promotes the ferrite formation within the weld zone (WZ) by retarding the cooling rate (from 9.83 °C/s to 0.8 °C/s). Microstructural transformations enabled in achieving the improved ductility (44.9 %) without significant loss of strength (665.75 MPa). Overmatched impact toughness (103 ± 2) J of WZ was also obtained.</div></div>","PeriodicalId":38186,"journal":{"name":"Manufacturing Letters","volume":"42 ","pages":"Pages 30-33"},"PeriodicalIF":1.9000,"publicationDate":"2024-10-09","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Enhancing mechanical properties of dissimilar steel A-TIG weld joint by in-situ induction post-heating\",\"authors\":\"Pratishtha Sharma ,&nbsp;Dheerendra Kumar Dwivedi\",\"doi\":\"10.1016/j.mfglet.2024.09.201\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>An approach is proposed to enhance the mechanical properties (ductility and impact toughness) of dissimilar martensitic steel-austenitic stainless steel joint by ‘A-TIG welding with induction post-heating (A-TIG<sub>(I)</sub> welding)’. The A-TIG<sub>(I)</sub> welding mitigates the martensite formation and promotes the ferrite formation within the weld zone (WZ) by retarding the cooling rate (from 9.83 °C/s to 0.8 °C/s). Microstructural transformations enabled in achieving the improved ductility (44.9 %) without significant loss of strength (665.75 MPa). Overmatched impact toughness (103 ± 2) J of WZ was also obtained.</div></div>\",\"PeriodicalId\":38186,\"journal\":{\"name\":\"Manufacturing Letters\",\"volume\":\"42 \",\"pages\":\"Pages 30-33\"},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2024-10-09\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Manufacturing Letters\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2213846324002931\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENGINEERING, MANUFACTURING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Manufacturing Letters","FirstCategoryId":"1085","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2213846324002931","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}
引用次数: 0

摘要

本文提出了一种通过 "感应后加热 A-TIG 焊接(A-TIG(I) 焊接)"提高异种马氏体钢-奥氏体不锈钢接头机械性能(延展性和冲击韧性)的方法。A-TIG(I) 焊接通过降低冷却速度(从 9.83°C/s 降至 0.8°C/s),减少了马氏体的形成,促进了焊接区(WZ)内铁素体的形成。微观结构的转变提高了延展性(44.9%),而强度(665.75 兆帕)没有明显下降。此外,还获得了与 WZ 不相匹配的冲击韧性(103 ± 2)J。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Enhancing mechanical properties of dissimilar steel A-TIG weld joint by in-situ induction post-heating
An approach is proposed to enhance the mechanical properties (ductility and impact toughness) of dissimilar martensitic steel-austenitic stainless steel joint by ‘A-TIG welding with induction post-heating (A-TIG(I) welding)’. The A-TIG(I) welding mitigates the martensite formation and promotes the ferrite formation within the weld zone (WZ) by retarding the cooling rate (from 9.83 °C/s to 0.8 °C/s). Microstructural transformations enabled in achieving the improved ductility (44.9 %) without significant loss of strength (665.75 MPa). Overmatched impact toughness (103 ± 2) J of WZ was also obtained.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Manufacturing Letters
Manufacturing Letters Engineering-Industrial and Manufacturing Engineering
CiteScore
4.20
自引率
5.10%
发文量
192
审稿时长
60 days
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信