{"title":"基于喷水强化的 2519a 铝合金表面下流体流动的疲劳性能和残余应力研究","authors":"","doi":"10.1016/j.vacuum.2024.113648","DOIUrl":null,"url":null,"abstract":"<div><div>In this study, the influence mechanism of water jet (WJ) strengthening on the surface integrity and fatigue properties of 2519 aluminum alloy was investigated by using finite element software Abaqus 2023 and fatigue analysis software Fe-safe. The effects of jet velocity and transverse velocity on the development of surface roughness and residual stress in different strengthening stages were studied, and the fatigue properties of WJ strengthened samples were analyzed by Fe-safe fatigue software. Finally, the fatigue life and fracture morphology of WJ strengthened specimens were analyzed by fatigue test, and the accuracy of finite element analysis was verified. Results indicate that surface roughness post-WJ enhancement displays a “W” shaped distribution, positively correlated with jet velocity. Conversely, increased roughness negatively correlates with higher traverse speeds, with optimal values recorded between 400 and 600 mm/min at WJ-290 mm/s, ranging from 1.10322 to 1.41167 μm. Additionally, the study reveals that maximum residual compressive stress during the WJ-Ip phase correlates positively with jet velocity, peaking at 302 MPa for WJ-290 mm/s. The research also notes that while higher jet velocities enhance residual compressive stress, they simultaneously elevate surface roughness, potentially introducing damage and increasing the variability of stress magnitudes. The study underscores the necessity of meticulously calibrating WJ parameters to enhance surface quality effectively while minimizing adverse effects. This balance is critical to optimizing the treatment process and achieving desired material properties.</div></div>","PeriodicalId":23559,"journal":{"name":"Vacuum","volume":null,"pages":null},"PeriodicalIF":3.8000,"publicationDate":"2024-09-13","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Study on the fatigue performance and Residual Stress of subsurface fluid flow of 2519a aluminum alloy based on water jet peening\",\"authors\":\"\",\"doi\":\"10.1016/j.vacuum.2024.113648\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><div>In this study, the influence mechanism of water jet (WJ) strengthening on the surface integrity and fatigue properties of 2519 aluminum alloy was investigated by using finite element software Abaqus 2023 and fatigue analysis software Fe-safe. The effects of jet velocity and transverse velocity on the development of surface roughness and residual stress in different strengthening stages were studied, and the fatigue properties of WJ strengthened samples were analyzed by Fe-safe fatigue software. Finally, the fatigue life and fracture morphology of WJ strengthened specimens were analyzed by fatigue test, and the accuracy of finite element analysis was verified. Results indicate that surface roughness post-WJ enhancement displays a “W” shaped distribution, positively correlated with jet velocity. Conversely, increased roughness negatively correlates with higher traverse speeds, with optimal values recorded between 400 and 600 mm/min at WJ-290 mm/s, ranging from 1.10322 to 1.41167 μm. Additionally, the study reveals that maximum residual compressive stress during the WJ-Ip phase correlates positively with jet velocity, peaking at 302 MPa for WJ-290 mm/s. The research also notes that while higher jet velocities enhance residual compressive stress, they simultaneously elevate surface roughness, potentially introducing damage and increasing the variability of stress magnitudes. The study underscores the necessity of meticulously calibrating WJ parameters to enhance surface quality effectively while minimizing adverse effects. This balance is critical to optimizing the treatment process and achieving desired material properties.</div></div>\",\"PeriodicalId\":23559,\"journal\":{\"name\":\"Vacuum\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":3.8000,\"publicationDate\":\"2024-09-13\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Vacuum\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0042207X24006948\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Vacuum","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0042207X24006948","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Study on the fatigue performance and Residual Stress of subsurface fluid flow of 2519a aluminum alloy based on water jet peening
In this study, the influence mechanism of water jet (WJ) strengthening on the surface integrity and fatigue properties of 2519 aluminum alloy was investigated by using finite element software Abaqus 2023 and fatigue analysis software Fe-safe. The effects of jet velocity and transverse velocity on the development of surface roughness and residual stress in different strengthening stages were studied, and the fatigue properties of WJ strengthened samples were analyzed by Fe-safe fatigue software. Finally, the fatigue life and fracture morphology of WJ strengthened specimens were analyzed by fatigue test, and the accuracy of finite element analysis was verified. Results indicate that surface roughness post-WJ enhancement displays a “W” shaped distribution, positively correlated with jet velocity. Conversely, increased roughness negatively correlates with higher traverse speeds, with optimal values recorded between 400 and 600 mm/min at WJ-290 mm/s, ranging from 1.10322 to 1.41167 μm. Additionally, the study reveals that maximum residual compressive stress during the WJ-Ip phase correlates positively with jet velocity, peaking at 302 MPa for WJ-290 mm/s. The research also notes that while higher jet velocities enhance residual compressive stress, they simultaneously elevate surface roughness, potentially introducing damage and increasing the variability of stress magnitudes. The study underscores the necessity of meticulously calibrating WJ parameters to enhance surface quality effectively while minimizing adverse effects. This balance is critical to optimizing the treatment process and achieving desired material properties.
期刊介绍:
Vacuum is an international rapid publications journal with a focus on short communication. All papers are peer-reviewed, with the review process for short communication geared towards very fast turnaround times. The journal also published full research papers, thematic issues and selected papers from leading conferences.
A report in Vacuum should represent a major advance in an area that involves a controlled environment at pressures of one atmosphere or below.
The scope of the journal includes:
1. Vacuum; original developments in vacuum pumping and instrumentation, vacuum measurement, vacuum gas dynamics, gas-surface interactions, surface treatment for UHV applications and low outgassing, vacuum melting, sintering, and vacuum metrology. Technology and solutions for large-scale facilities (e.g., particle accelerators and fusion devices). New instrumentation ( e.g., detectors and electron microscopes).
2. Plasma science; advances in PVD, CVD, plasma-assisted CVD, ion sources, deposition processes and analysis.
3. Surface science; surface engineering, surface chemistry, surface analysis, crystal growth, ion-surface interactions and etching, nanometer-scale processing, surface modification.
4. Materials science; novel functional or structural materials. Metals, ceramics, and polymers. Experiments, simulations, and modelling for understanding structure-property relationships. Thin films and coatings. Nanostructures and ion implantation.