{"title":"粘接 CAD-CAM 树脂块中使用的树脂基胶结剂的磨损特性。","authors":"Hiroto Takenaka, Keiichi Yoshida, Takashi Sawase","doi":"10.4012/dmj.2024-137","DOIUrl":null,"url":null,"abstract":"<p><p>This study aimed to investigate the wear and microhardness of luting agents and computer-aided design-computer-aided manufacturing (CAD-CAM) resin blocks, and to compare the wear characteristics of resin-based luting agents used in bonded specimens of CAD-CAM resin blocks. After three-body wear test, the amount of wear and Vickers hardness were measured and Pearson's correlation coefficient was calculated. The lowest amount of wear and the highest Vickers hardness values were obtained for Estecem II. Filler loss was observed in five composite resin cements. A strong negative correlation was observed in the luting agents between the amount of wear and Vickers hardness value (r=-0.874, p<0.0001). Additionally, a strong positive correlation was observed between the amount of wear of the bonded specimen and amount of luting agent used alone (r=0.943, p<0.0001). To conclude, the wear resistance of the luting agent used in the bonded specimen was significantly influenced by the bonding between the filler and matrix resin.</p>","PeriodicalId":11065,"journal":{"name":"Dental materials journal","volume":null,"pages":null},"PeriodicalIF":1.9000,"publicationDate":"2024-09-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Wear characteristics of resin-based luting agents used in the bonded CAD-CAM resin blocks.\",\"authors\":\"Hiroto Takenaka, Keiichi Yoshida, Takashi Sawase\",\"doi\":\"10.4012/dmj.2024-137\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>This study aimed to investigate the wear and microhardness of luting agents and computer-aided design-computer-aided manufacturing (CAD-CAM) resin blocks, and to compare the wear characteristics of resin-based luting agents used in bonded specimens of CAD-CAM resin blocks. After three-body wear test, the amount of wear and Vickers hardness were measured and Pearson's correlation coefficient was calculated. The lowest amount of wear and the highest Vickers hardness values were obtained for Estecem II. Filler loss was observed in five composite resin cements. A strong negative correlation was observed in the luting agents between the amount of wear and Vickers hardness value (r=-0.874, p<0.0001). Additionally, a strong positive correlation was observed between the amount of wear of the bonded specimen and amount of luting agent used alone (r=0.943, p<0.0001). To conclude, the wear resistance of the luting agent used in the bonded specimen was significantly influenced by the bonding between the filler and matrix resin.</p>\",\"PeriodicalId\":11065,\"journal\":{\"name\":\"Dental materials journal\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":1.9000,\"publicationDate\":\"2024-09-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Dental materials journal\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.4012/dmj.2024-137\",\"RegionNum\":4,\"RegionCategory\":\"医学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"DENTISTRY, ORAL SURGERY & MEDICINE\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Dental materials journal","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.4012/dmj.2024-137","RegionNum":4,"RegionCategory":"医学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"DENTISTRY, ORAL SURGERY & MEDICINE","Score":null,"Total":0}
引用次数: 0
摘要
本研究旨在探究敷料和计算机辅助设计-计算机辅助制造（CAD-CAM）树脂块的磨损和显微硬度，并比较用于 CAD-CAM 树脂块粘结试样的树脂基敷料的磨损特性。三体磨损试验后，测量了磨损量和维氏硬度，并计算了皮尔逊相关系数。Estecem II 的磨损量最小，维氏硬度值最高。在五种复合树脂水门汀中观察到了填料流失。在粘接剂中，磨损量和维氏硬度值之间呈强烈的负相关（r=-0.874，p＜0.05）。
Wear characteristics of resin-based luting agents used in the bonded CAD-CAM resin blocks.
This study aimed to investigate the wear and microhardness of luting agents and computer-aided design-computer-aided manufacturing (CAD-CAM) resin blocks, and to compare the wear characteristics of resin-based luting agents used in bonded specimens of CAD-CAM resin blocks. After three-body wear test, the amount of wear and Vickers hardness were measured and Pearson's correlation coefficient was calculated. The lowest amount of wear and the highest Vickers hardness values were obtained for Estecem II. Filler loss was observed in five composite resin cements. A strong negative correlation was observed in the luting agents between the amount of wear and Vickers hardness value (r=-0.874, p<0.0001). Additionally, a strong positive correlation was observed between the amount of wear of the bonded specimen and amount of luting agent used alone (r=0.943, p<0.0001). To conclude, the wear resistance of the luting agent used in the bonded specimen was significantly influenced by the bonding between the filler and matrix resin.
期刊介绍：
Dental Materials Journal is a peer review journal published by the Japanese Society for Dental Materials and Devises aiming to introduce the progress of the basic and applied sciences in dental materials and biomaterials. The dental materials-related clinical science and instrumental technologies are also within the scope of this journal. The materials dealt include synthetic polymers, ceramics, metals and tissue-derived biomaterials. Forefront dental materials and biomaterials used in developing filed, such as tissue engineering, bioengineering and artificial intelligence, are positively considered for the review as well. Recent acceptance rate of the submitted manuscript in the journal is around 30%.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
