利用电聚焦阻抗法提高体积导体深部区域的灵敏度。

Q3 Biochemistry, Genetics and Molecular Biology
Journal of Electrical Bioimpedance Pub Date : 2024-09-06 eCollection Date: 2024-01-01 DOI:10.2478/joeb-2024-0012
Mahjabin Mobarak, K Siddique-E Rabbani
{"title":"利用电聚焦阻抗法提高体积导体深部区域的灵敏度。","authors":"Mahjabin Mobarak, K Siddique-E Rabbani","doi":"10.2478/joeb-2024-0012","DOIUrl":null,"url":null,"abstract":"<p><p>Bioimpedance measurements are becoming important in probing the human body for diagnosis and monitoring. An age old 4-electrode technique called tetrapolar impedance measurement (TPIM), giving transfer impedance, cannot localize a specific zone besides having large zones of negative sensitivity. A new technique named the focused impedance method (FIM) from Dhaka University (DU), Bangladesh used the algebraic average of two concentric and orthogonal TPIMs, localizing a zone of interest and having reduced magnitudes of negative sensitivity. Earlier, this was implemented with electrodes applied from one side of the human body giving information to shallow depths only. To get information from deeper regions, specifically, of the thorax, the same DU group placed two electrodes of a 4-electrode version of FIM at the front and two at the back in a horizontal plane of the thorax, using physics-based visualization. This was followed by a few quantitative studies using point sensitivity, which supported the concept. However, more quantitative studies still need to be performed, particularly using objects of finite sizes, in order to establish the technique on a stronger footing. The present study was taken up with this objective. A simplified approach was used in which the volume conductor was a rectangular non-conducting container filled with saline of uniform conductivity with an embedded spherical object - first an insulator and then a conductor. Electrodes were placed at specific chosen positions following the above visualization. Percentage change in transfer impedance with the object placed at different internal positions, compared to that without the object was obtained first using COMSOL simulation and then through experimental measurements. These were performed for both TPIM and FIM. The new configuration of 4-electrode FIM gave good depth sensitivity supporting the effectiveness of the new placement of electrodes.</p>","PeriodicalId":38125,"journal":{"name":"Journal of Electrical Bioimpedance","volume":"15 1","pages":"107-115"},"PeriodicalIF":0.0000,"publicationDate":"2024-09-06","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11381942/pdf/","citationCount":"0","resultStr":"{\"title\":\"Improving sensitivity in the deep regions of a volume conductor using electrical focused impedance methods.\",\"authors\":\"Mahjabin Mobarak, K Siddique-E Rabbani\",\"doi\":\"10.2478/joeb-2024-0012\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>Bioimpedance measurements are becoming important in probing the human body for diagnosis and monitoring. An age old 4-electrode technique called tetrapolar impedance measurement (TPIM), giving transfer impedance, cannot localize a specific zone besides having large zones of negative sensitivity. A new technique named the focused impedance method (FIM) from Dhaka University (DU), Bangladesh used the algebraic average of two concentric and orthogonal TPIMs, localizing a zone of interest and having reduced magnitudes of negative sensitivity. Earlier, this was implemented with electrodes applied from one side of the human body giving information to shallow depths only. To get information from deeper regions, specifically, of the thorax, the same DU group placed two electrodes of a 4-electrode version of FIM at the front and two at the back in a horizontal plane of the thorax, using physics-based visualization. This was followed by a few quantitative studies using point sensitivity, which supported the concept. However, more quantitative studies still need to be performed, particularly using objects of finite sizes, in order to establish the technique on a stronger footing. The present study was taken up with this objective. A simplified approach was used in which the volume conductor was a rectangular non-conducting container filled with saline of uniform conductivity with an embedded spherical object - first an insulator and then a conductor. Electrodes were placed at specific chosen positions following the above visualization. Percentage change in transfer impedance with the object placed at different internal positions, compared to that without the object was obtained first using COMSOL simulation and then through experimental measurements. These were performed for both TPIM and FIM. The new configuration of 4-electrode FIM gave good depth sensitivity supporting the effectiveness of the new placement of electrodes.</p>\",\"PeriodicalId\":38125,\"journal\":{\"name\":\"Journal of Electrical Bioimpedance\",\"volume\":\"15 1\",\"pages\":\"107-115\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2024-09-06\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"https://www.ncbi.nlm.nih.gov/pmc/articles/PMC11381942/pdf/\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Electrical Bioimpedance\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.2478/joeb-2024-0012\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"2024/1/1 0:00:00\",\"PubModel\":\"eCollection\",\"JCR\":\"Q3\",\"JCRName\":\"Biochemistry, Genetics and Molecular Biology\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Electrical Bioimpedance","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2478/joeb-2024-0012","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"2024/1/1 0:00:00","PubModel":"eCollection","JCR":"Q3","JCRName":"Biochemistry, Genetics and Molecular Biology","Score":null,"Total":0}
引用次数: 0

摘要

生物阻抗测量在探测人体以进行诊断和监测方面正变得越来越重要。四极阻抗测量法(TPIM)是一种古老的四电极技术,可提供传递阻抗,但无法定位特定区域,而且有很大的负灵敏度区域。孟加拉国达卡大学(DU)推出的一种名为 "聚焦阻抗法"(FIM)的新技术使用了两个同心正交 TPIM 的代数平均值,可定位感兴趣区并降低负灵敏度。早些时候,这种方法是通过从人体一侧施加电极来实现的,只能获得浅层的信息。为了获得更深区域的信息,特别是胸腔的信息,同一 DU 小组利用基于物理的可视化技术,在胸腔水平面的前部和后部各放置了两个 4 电极版 FIM 的电极。随后又进行了一些使用点灵敏度的定量研究,这些研究都支持这一概念。不过,还需要进行更多的定量研究,特别是使用有限大小的物体,以便为该技术奠定更坚实的基础。本研究正是以此为目标。我们采用了一种简化的方法,即体积导体是一个长方形的非导电容器,里面装满了导电率均匀的生理盐水,并嵌入了一个球形物体--首先是绝缘体,然后才是导体。按照上述可视化方法,将电极放置在选定的特定位置。首先使用 COMSOL 仿真,然后通过实验测量,得出在不同内部位置放置物体时与不放置物体时相比,传递阻抗的百分比变化。这些测量同时针对 TPIM 和 FIM 进行。4 个电极 FIM 的新配置具有良好的深度灵敏度,证明了新电极位置的有效性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Improving sensitivity in the deep regions of a volume conductor using electrical focused impedance methods.

Bioimpedance measurements are becoming important in probing the human body for diagnosis and monitoring. An age old 4-electrode technique called tetrapolar impedance measurement (TPIM), giving transfer impedance, cannot localize a specific zone besides having large zones of negative sensitivity. A new technique named the focused impedance method (FIM) from Dhaka University (DU), Bangladesh used the algebraic average of two concentric and orthogonal TPIMs, localizing a zone of interest and having reduced magnitudes of negative sensitivity. Earlier, this was implemented with electrodes applied from one side of the human body giving information to shallow depths only. To get information from deeper regions, specifically, of the thorax, the same DU group placed two electrodes of a 4-electrode version of FIM at the front and two at the back in a horizontal plane of the thorax, using physics-based visualization. This was followed by a few quantitative studies using point sensitivity, which supported the concept. However, more quantitative studies still need to be performed, particularly using objects of finite sizes, in order to establish the technique on a stronger footing. The present study was taken up with this objective. A simplified approach was used in which the volume conductor was a rectangular non-conducting container filled with saline of uniform conductivity with an embedded spherical object - first an insulator and then a conductor. Electrodes were placed at specific chosen positions following the above visualization. Percentage change in transfer impedance with the object placed at different internal positions, compared to that without the object was obtained first using COMSOL simulation and then through experimental measurements. These were performed for both TPIM and FIM. The new configuration of 4-electrode FIM gave good depth sensitivity supporting the effectiveness of the new placement of electrodes.

求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
Journal of Electrical Bioimpedance
Journal of Electrical Bioimpedance Engineering-Biomedical Engineering
CiteScore
3.00
自引率
0.00%
发文量
8
审稿时长
17 weeks
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信