{"title":"使基于 SiPM-GGAG:Ce,B 的伽马探测器的能量响应趋于平缓的电子能量补偿方法。","authors":"Saurabh Srivastava, Pratip Mitra, Amit Kumar, Sunil Singh, Mohit Tyagi, Aerattukkara Vinod Kumar, Anita Topkar","doi":"10.1093/rpd/ncae196","DOIUrl":null,"url":null,"abstract":"<p><p>The energy response of gross gamma dose rate monitors needs to be flat in order to prevent overestimation of dose at low gamma energies. In this paper, a discriminator threshold modulation based electronic energy compensation algorithm has been proposed for SiPM-scintillator based gamma detectors. Theoretical simulation studies were carried out in order to optimize the parameters of the periodic ramp voltage used for modulation of the discriminator threshold of a SiPM-GGAG:Ce,B based gamma dose rate monitor. A customized threshold modulation circuit and signal processing electronics were developed for this gamma detector. For experimentally optimizing the parameters, the energy response studies of the detector, with and without the discriminator threshold modulation, were carried out. With the optimized parameters for a periodic ramp threshold, the count rates for 241Am (60 keV) and 60Co (1173 and 1332 keV) were observed to be within ±30% of the count rate obtained for 137Cs (662 keV). Using the electronic energy compensation techniques presented in this paper, a flat energy response of the SiPM-scintillator gamma detector for the energy range of 60 keV to 1.5 MeV could be achieved.</p>","PeriodicalId":20795,"journal":{"name":"Radiation protection dosimetry","volume":null,"pages":null},"PeriodicalIF":0.8000,"publicationDate":"2024-09-21","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"An electronic energy compensation method for flattening the energy response of SiPM-GGAG:Ce,B based gamma detector.\",\"authors\":\"Saurabh Srivastava, Pratip Mitra, Amit Kumar, Sunil Singh, Mohit Tyagi, Aerattukkara Vinod Kumar, Anita Topkar\",\"doi\":\"10.1093/rpd/ncae196\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p><p>The energy response of gross gamma dose rate monitors needs to be flat in order to prevent overestimation of dose at low gamma energies. In this paper, a discriminator threshold modulation based electronic energy compensation algorithm has been proposed for SiPM-scintillator based gamma detectors. Theoretical simulation studies were carried out in order to optimize the parameters of the periodic ramp voltage used for modulation of the discriminator threshold of a SiPM-GGAG:Ce,B based gamma dose rate monitor. A customized threshold modulation circuit and signal processing electronics were developed for this gamma detector. For experimentally optimizing the parameters, the energy response studies of the detector, with and without the discriminator threshold modulation, were carried out. With the optimized parameters for a periodic ramp threshold, the count rates for 241Am (60 keV) and 60Co (1173 and 1332 keV) were observed to be within ±30% of the count rate obtained for 137Cs (662 keV). Using the electronic energy compensation techniques presented in this paper, a flat energy response of the SiPM-scintillator gamma detector for the energy range of 60 keV to 1.5 MeV could be achieved.</p>\",\"PeriodicalId\":20795,\"journal\":{\"name\":\"Radiation protection dosimetry\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":0.8000,\"publicationDate\":\"2024-09-21\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Radiation protection dosimetry\",\"FirstCategoryId\":\"93\",\"ListUrlMain\":\"https://doi.org/10.1093/rpd/ncae196\",\"RegionNum\":4,\"RegionCategory\":\"环境科学与生态学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"ENVIRONMENTAL SCIENCES\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Radiation protection dosimetry","FirstCategoryId":"93","ListUrlMain":"https://doi.org/10.1093/rpd/ncae196","RegionNum":4,"RegionCategory":"环境科学与生态学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"ENVIRONMENTAL SCIENCES","Score":null,"Total":0}
An electronic energy compensation method for flattening the energy response of SiPM-GGAG:Ce,B based gamma detector.
The energy response of gross gamma dose rate monitors needs to be flat in order to prevent overestimation of dose at low gamma energies. In this paper, a discriminator threshold modulation based electronic energy compensation algorithm has been proposed for SiPM-scintillator based gamma detectors. Theoretical simulation studies were carried out in order to optimize the parameters of the periodic ramp voltage used for modulation of the discriminator threshold of a SiPM-GGAG:Ce,B based gamma dose rate monitor. A customized threshold modulation circuit and signal processing electronics were developed for this gamma detector. For experimentally optimizing the parameters, the energy response studies of the detector, with and without the discriminator threshold modulation, were carried out. With the optimized parameters for a periodic ramp threshold, the count rates for 241Am (60 keV) and 60Co (1173 and 1332 keV) were observed to be within ±30% of the count rate obtained for 137Cs (662 keV). Using the electronic energy compensation techniques presented in this paper, a flat energy response of the SiPM-scintillator gamma detector for the energy range of 60 keV to 1.5 MeV could be achieved.
期刊介绍:
Radiation Protection Dosimetry covers all aspects of personal and environmental dosimetry and monitoring, for both ionising and non-ionising radiations. This includes biological aspects, physical concepts, biophysical dosimetry, external and internal personal dosimetry and monitoring, environmental and workplace monitoring, accident dosimetry, and dosimetry related to the protection of patients. Particular emphasis is placed on papers covering the fundamentals of dosimetry; units, radiation quantities and conversion factors. Papers covering archaeological dating are included only if the fundamental measurement method or technique, such as thermoluminescence, has direct application to personal dosimetry measurements. Papers covering the dosimetric aspects of radon or other naturally occurring radioactive materials and low level radiation are included. Animal experiments and ecological sample measurements are not included unless there is a significant relevant content reason.