Wenjie Zhang, Yang Shang, Hongyu Jiang, Fanxin Meng, Haixia Zhao, Weijie Shi
{"title":"新型对称液压压电能量收集器的仿真与实验研究","authors":"Wenjie Zhang, Yang Shang, Hongyu Jiang, Fanxin Meng, Haixia Zhao, Weijie Shi","doi":"10.1002/ente.202400867","DOIUrl":null,"url":null,"abstract":"This study introduces a new symmetrical hydraulic piezoelectric energy harvester. By integrating theoretical analysis, simulation, and empirical testing, the research delves into the energy‐harvesting potential of monolithic single‐side output, monolithic two‐side parallel‐connected output, stacked one‐side parallel‐connected output, and stacked two‐side parallel‐connected output under varying parameter configurations. Additionally, it elucidates the energy dissipation occurring during the energy‐harvesting process of stacked piezoelectric disks. It has been observed that the primary determinant of voltage is the amplitude of pulsation, not the static pressure. Concurrently, the study also addresses the consistency of power generation between multiple channels. A study is made on whether there is a proportional relationship between single‐channel power generation and multi‐channel power generation. The root mean square (RMS) voltage of each connection sharply rises with resistance from 2 to 100 KΩ. It is found that the performance of parallel connection of monolithic piezoelectric disk is better than that of other connection methods. At 3 MPa and 100 Hz, the optimal resistance is 16 KΩ, yielding a maximum average power of 1155.63 μW and an optimal power density of 1.774 μW (bar mm<jats:sup>3</jats:sup>)<jats:sup>−1</jats:sup>. Consequently, the research offers a novel approach to addressing the issue of sustainable energy supply for low‐power electronic devices and sensors.","PeriodicalId":11573,"journal":{"name":"Energy technology","volume":null,"pages":null},"PeriodicalIF":3.6000,"publicationDate":"2024-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Simulation and Experimental Research on a New Symmetrical Hydraulic Piezoelectric Energy Harvester\",\"authors\":\"Wenjie Zhang, Yang Shang, Hongyu Jiang, Fanxin Meng, Haixia Zhao, Weijie Shi\",\"doi\":\"10.1002/ente.202400867\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This study introduces a new symmetrical hydraulic piezoelectric energy harvester. By integrating theoretical analysis, simulation, and empirical testing, the research delves into the energy‐harvesting potential of monolithic single‐side output, monolithic two‐side parallel‐connected output, stacked one‐side parallel‐connected output, and stacked two‐side parallel‐connected output under varying parameter configurations. Additionally, it elucidates the energy dissipation occurring during the energy‐harvesting process of stacked piezoelectric disks. It has been observed that the primary determinant of voltage is the amplitude of pulsation, not the static pressure. Concurrently, the study also addresses the consistency of power generation between multiple channels. A study is made on whether there is a proportional relationship between single‐channel power generation and multi‐channel power generation. The root mean square (RMS) voltage of each connection sharply rises with resistance from 2 to 100 KΩ. It is found that the performance of parallel connection of monolithic piezoelectric disk is better than that of other connection methods. At 3 MPa and 100 Hz, the optimal resistance is 16 KΩ, yielding a maximum average power of 1155.63 μW and an optimal power density of 1.774 μW (bar mm<jats:sup>3</jats:sup>)<jats:sup>−1</jats:sup>. Consequently, the research offers a novel approach to addressing the issue of sustainable energy supply for low‐power electronic devices and sensors.\",\"PeriodicalId\":11573,\"journal\":{\"name\":\"Energy technology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":3.6000,\"publicationDate\":\"2024-09-19\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Energy technology\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1002/ente.202400867\",\"RegionNum\":4,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"ENERGY & FUELS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Energy technology","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1002/ente.202400867","RegionNum":4,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"ENERGY & FUELS","Score":null,"Total":0}
Simulation and Experimental Research on a New Symmetrical Hydraulic Piezoelectric Energy Harvester
This study introduces a new symmetrical hydraulic piezoelectric energy harvester. By integrating theoretical analysis, simulation, and empirical testing, the research delves into the energy‐harvesting potential of monolithic single‐side output, monolithic two‐side parallel‐connected output, stacked one‐side parallel‐connected output, and stacked two‐side parallel‐connected output under varying parameter configurations. Additionally, it elucidates the energy dissipation occurring during the energy‐harvesting process of stacked piezoelectric disks. It has been observed that the primary determinant of voltage is the amplitude of pulsation, not the static pressure. Concurrently, the study also addresses the consistency of power generation between multiple channels. A study is made on whether there is a proportional relationship between single‐channel power generation and multi‐channel power generation. The root mean square (RMS) voltage of each connection sharply rises with resistance from 2 to 100 KΩ. It is found that the performance of parallel connection of monolithic piezoelectric disk is better than that of other connection methods. At 3 MPa and 100 Hz, the optimal resistance is 16 KΩ, yielding a maximum average power of 1155.63 μW and an optimal power density of 1.774 μW (bar mm3)−1. Consequently, the research offers a novel approach to addressing the issue of sustainable energy supply for low‐power electronic devices and sensors.
期刊介绍:
Energy Technology provides a forum for researchers and engineers from all relevant disciplines concerned with the generation, conversion, storage, and distribution of energy.
This new journal shall publish articles covering all technical aspects of energy process engineering from different perspectives, e.g.,
new concepts of energy generation and conversion;
design, operation, control, and optimization of processes for energy generation (e.g., carbon capture) and conversion of energy carriers;
improvement of existing processes;
combination of single components to systems for energy generation;
design of systems for energy storage;
production processes of fuels, e.g., hydrogen, electricity, petroleum, biobased fuels;
concepts and design of devices for energy distribution.