D. D. Tarasov, M. V. Boyarchuk, E. S. Chaplina, I. A. Makagonov, A. S. Borodulin
{"title":"工程支持对使用真空灌注法进行玄武岩塑料成型工艺质量的影响研究","authors":"D. D. Tarasov, M. V. Boyarchuk, E. S. Chaplina, I. A. Makagonov, A. S. Borodulin","doi":"10.1134/S1995421224701089","DOIUrl":null,"url":null,"abstract":"<p>The results of an experimental evaluation of the influence of the geometric form of the tubes used for supplying a binder under the molding of parts using vacuum infusion on the flow uniformity of the binder front and on the phase composition of a composite material have been presented. The epoxy binder and basalt fabric were used as initial materials. Three types of tubes for supplying the binder have been considered, namely, regular, spiral, and special (in the form of a distribution stripe). We have presented the schemes of their installation, the patterns of the binder front movement, the results of an expert evaluation of the quality of the impregnation process, and the results of determining the phase composition and interlaminar shear strength. It has been established that the use of a spiral tube and distribution stripe makes it possible to reduce the difference in the phase composition of the basalt–plastic at the sites of installation of the tubes for the input and output of binders makes it possible to obtain the highest values of interlaminar shear strength.</p>","PeriodicalId":741,"journal":{"name":"Polymer Science, Series D","volume":"17 3","pages":"636 - 640"},"PeriodicalIF":0.5800,"publicationDate":"2024-09-19","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"A Study of the Influence of Engineering Support on the Quality of the Molding Process of Basalt–Plastics Using Vacuum Infusion\",\"authors\":\"D. D. Tarasov, M. V. Boyarchuk, E. S. Chaplina, I. A. Makagonov, A. S. Borodulin\",\"doi\":\"10.1134/S1995421224701089\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The results of an experimental evaluation of the influence of the geometric form of the tubes used for supplying a binder under the molding of parts using vacuum infusion on the flow uniformity of the binder front and on the phase composition of a composite material have been presented. The epoxy binder and basalt fabric were used as initial materials. Three types of tubes for supplying the binder have been considered, namely, regular, spiral, and special (in the form of a distribution stripe). We have presented the schemes of their installation, the patterns of the binder front movement, the results of an expert evaluation of the quality of the impregnation process, and the results of determining the phase composition and interlaminar shear strength. It has been established that the use of a spiral tube and distribution stripe makes it possible to reduce the difference in the phase composition of the basalt–plastic at the sites of installation of the tubes for the input and output of binders makes it possible to obtain the highest values of interlaminar shear strength.</p>\",\"PeriodicalId\":741,\"journal\":{\"name\":\"Polymer Science, Series D\",\"volume\":\"17 3\",\"pages\":\"636 - 640\"},\"PeriodicalIF\":0.5800,\"publicationDate\":\"2024-09-19\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Polymer Science, Series D\",\"FirstCategoryId\":\"1\",\"ListUrlMain\":\"https://link.springer.com/article/10.1134/S1995421224701089\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"Materials Science\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Polymer Science, Series D","FirstCategoryId":"1","ListUrlMain":"https://link.springer.com/article/10.1134/S1995421224701089","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"Materials Science","Score":null,"Total":0}
A Study of the Influence of Engineering Support on the Quality of the Molding Process of Basalt–Plastics Using Vacuum Infusion
The results of an experimental evaluation of the influence of the geometric form of the tubes used for supplying a binder under the molding of parts using vacuum infusion on the flow uniformity of the binder front and on the phase composition of a composite material have been presented. The epoxy binder and basalt fabric were used as initial materials. Three types of tubes for supplying the binder have been considered, namely, regular, spiral, and special (in the form of a distribution stripe). We have presented the schemes of their installation, the patterns of the binder front movement, the results of an expert evaluation of the quality of the impregnation process, and the results of determining the phase composition and interlaminar shear strength. It has been established that the use of a spiral tube and distribution stripe makes it possible to reduce the difference in the phase composition of the basalt–plastic at the sites of installation of the tubes for the input and output of binders makes it possible to obtain the highest values of interlaminar shear strength.
期刊介绍：
Polymer Science, Series D publishes useful description of engineering developments that are related to the preparation and application of glues, compounds, sealing materials, and binding agents, articles on the adhesion theory, prediction of the strength of adhesive joints, methods for the control of their properties, synthesis, and methods of structural modeling of glued joints and constructions, original articles with new scientific results, analytical reviews of the modern state in the field.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
