{"title":"水下原位线材激光增材制造双相不锈钢的微观结构和性能","authors":"Congwei Li, Jialei Zhu, Caimei Wang, Caiyan Deng, Lei Cui, Xiaochun Zhang, Chenglu Zhao, Xiangdong Jiao","doi":"10.1080/17452759.2024.2401925","DOIUrl":null,"url":null,"abstract":"A novel underwater in-situ wire-based laser additive manufacturing (ULAM) technology is proposed for the in-service repair of underwater components in nuclear power plant. Duplex stainless steel (DSS) obtained in air and underwater environments were analysed using material characterisation and testing methods. The effects of underwater additive environments on the microstructure evolution, mechanical properties and corrosion resistance of the specimens were investigated. The results show that the laser heat input is consumed to balance the heat loss of the water-cooled base material during the underwater laser additive manufacturing process, leading to a reduction in the heat input to the molten pool. Underwater specimen exhibit a two-phase balance, with small ferrite grain boundary angles, resulting in better tensile strength and corrosion resistance. Laser reheat treatment leads to a phase change in microstructure, which can enhance the microhardness and the tensile strength. The ULAM system can meet the requirements of actual engineering for cladding layer.","PeriodicalId":23756,"journal":{"name":"Virtual and Physical Prototyping","volume":"14 1","pages":""},"PeriodicalIF":10.2000,"publicationDate":"2024-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Microstructure and properties of underwater in-situ wire-based laser additive manufactured duplex stainless steel\",\"authors\":\"Congwei Li, Jialei Zhu, Caimei Wang, Caiyan Deng, Lei Cui, Xiaochun Zhang, Chenglu Zhao, Xiangdong Jiao\",\"doi\":\"10.1080/17452759.2024.2401925\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A novel underwater in-situ wire-based laser additive manufacturing (ULAM) technology is proposed for the in-service repair of underwater components in nuclear power plant. Duplex stainless steel (DSS) obtained in air and underwater environments were analysed using material characterisation and testing methods. The effects of underwater additive environments on the microstructure evolution, mechanical properties and corrosion resistance of the specimens were investigated. The results show that the laser heat input is consumed to balance the heat loss of the water-cooled base material during the underwater laser additive manufacturing process, leading to a reduction in the heat input to the molten pool. Underwater specimen exhibit a two-phase balance, with small ferrite grain boundary angles, resulting in better tensile strength and corrosion resistance. Laser reheat treatment leads to a phase change in microstructure, which can enhance the microhardness and the tensile strength. The ULAM system can meet the requirements of actual engineering for cladding layer.\",\"PeriodicalId\":23756,\"journal\":{\"name\":\"Virtual and Physical Prototyping\",\"volume\":\"14 1\",\"pages\":\"\"},\"PeriodicalIF\":10.2000,\"publicationDate\":\"2024-12-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Virtual and Physical Prototyping\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.1080/17452759.2024.2401925\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, MANUFACTURING\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Virtual and Physical Prototyping","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.1080/17452759.2024.2401925","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, MANUFACTURING","Score":null,"Total":0}
Microstructure and properties of underwater in-situ wire-based laser additive manufactured duplex stainless steel
A novel underwater in-situ wire-based laser additive manufacturing (ULAM) technology is proposed for the in-service repair of underwater components in nuclear power plant. Duplex stainless steel (DSS) obtained in air and underwater environments were analysed using material characterisation and testing methods. The effects of underwater additive environments on the microstructure evolution, mechanical properties and corrosion resistance of the specimens were investigated. The results show that the laser heat input is consumed to balance the heat loss of the water-cooled base material during the underwater laser additive manufacturing process, leading to a reduction in the heat input to the molten pool. Underwater specimen exhibit a two-phase balance, with small ferrite grain boundary angles, resulting in better tensile strength and corrosion resistance. Laser reheat treatment leads to a phase change in microstructure, which can enhance the microhardness and the tensile strength. The ULAM system can meet the requirements of actual engineering for cladding layer.
期刊介绍:
Virtual and Physical Prototyping (VPP) offers an international platform for professionals and academics to exchange innovative concepts and disseminate knowledge across the broad spectrum of virtual and rapid prototyping. The journal is exclusively online and encourages authors to submit supplementary materials such as data sets, color images, animations, and videos to enrich the content experience.
Scope:
The scope of VPP encompasses various facets of virtual and rapid prototyping.
All research articles published in VPP undergo a rigorous peer review process, which includes initial editor screening and anonymous refereeing by independent expert referees. This ensures the high quality and credibility of published work.