{"title":"表面活性剂溶液中气液分离和气泡生成的动力学和动力学:体积/界面特性和流体动力学条件的作用","authors":"","doi":"10.1016/j.seppur.2024.129483","DOIUrl":null,"url":null,"abstract":"<div><p>Understanding the kinetics and dynamics of gas–liquid separation and bubble generation in surfactant solutions is important for many industrial applications. To explore the potential mechanisms affecting the physical properties (expansion ratio, bubble size, and foam stability) of foams and bubbles, the surface tension of the solution, including the equilibrium and dynamic properties, was investigated. Then, the morphology of the surfactant aggregates was explored by cryo-transmission electron microscopy (cryo-TEM). Based on these experimental results, the effects of various physical and chemical factors (including the relative concentration of surfactant, dynamic surface tension, surface coverage, surface elasticity, surface mobility, aggregate morphology, etc.) on the expansion ratio and bubble size were analysed to identify which “universal” parameters can explain the phenomenon for all aqueous solutions in the gas–liquid separation process. Research has shown that the morphology of aggregates in a solution largely determines the surface properties of the solution at 1.5 ms (surface tension, surface coverage, surface elasticity, and so on). These surface properties significantly affect the expansion ratio. However, no good correlation was found between bubble size and these surface properties because surfactant vesicles can directly affect bubble size. In addition, the liquid flow rate and gas–liquid ratio have a significant impact on the expansion ratio and bubble size. Ultimately, we found that the foam stability, bubble size, and expansion ration can be described by a simple linear relationship. Our research provides new opinions for further understanding the effects of bulk/interfacial properties and hydrodynamic conditions on the physical properties of bubbles in the gas–liquid separation process.</p></div>","PeriodicalId":427,"journal":{"name":"Separation and Purification Technology","volume":null,"pages":null},"PeriodicalIF":8.1000,"publicationDate":"2024-09-14","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Kinetics and dynamics of Gas-liquid separation and bubble generation in surfactant solutions: Role of bulk/interfacial properties and hydrodynamic conditions\",\"authors\":\"\",\"doi\":\"10.1016/j.seppur.2024.129483\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Understanding the kinetics and dynamics of gas–liquid separation and bubble generation in surfactant solutions is important for many industrial applications. To explore the potential mechanisms affecting the physical properties (expansion ratio, bubble size, and foam stability) of foams and bubbles, the surface tension of the solution, including the equilibrium and dynamic properties, was investigated. Then, the morphology of the surfactant aggregates was explored by cryo-transmission electron microscopy (cryo-TEM). Based on these experimental results, the effects of various physical and chemical factors (including the relative concentration of surfactant, dynamic surface tension, surface coverage, surface elasticity, surface mobility, aggregate morphology, etc.) on the expansion ratio and bubble size were analysed to identify which “universal” parameters can explain the phenomenon for all aqueous solutions in the gas–liquid separation process. Research has shown that the morphology of aggregates in a solution largely determines the surface properties of the solution at 1.5 ms (surface tension, surface coverage, surface elasticity, and so on). These surface properties significantly affect the expansion ratio. However, no good correlation was found between bubble size and these surface properties because surfactant vesicles can directly affect bubble size. In addition, the liquid flow rate and gas–liquid ratio have a significant impact on the expansion ratio and bubble size. Ultimately, we found that the foam stability, bubble size, and expansion ration can be described by a simple linear relationship. Our research provides new opinions for further understanding the effects of bulk/interfacial properties and hydrodynamic conditions on the physical properties of bubbles in the gas–liquid separation process.</p></div>\",\"PeriodicalId\":427,\"journal\":{\"name\":\"Separation and Purification Technology\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":8.1000,\"publicationDate\":\"2024-09-14\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Separation and Purification Technology\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S1383586624032222\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"ENGINEERING, CHEMICAL\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Separation and Purification Technology","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S1383586624032222","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"ENGINEERING, CHEMICAL","Score":null,"Total":0}
Kinetics and dynamics of Gas-liquid separation and bubble generation in surfactant solutions: Role of bulk/interfacial properties and hydrodynamic conditions
Understanding the kinetics and dynamics of gas–liquid separation and bubble generation in surfactant solutions is important for many industrial applications. To explore the potential mechanisms affecting the physical properties (expansion ratio, bubble size, and foam stability) of foams and bubbles, the surface tension of the solution, including the equilibrium and dynamic properties, was investigated. Then, the morphology of the surfactant aggregates was explored by cryo-transmission electron microscopy (cryo-TEM). Based on these experimental results, the effects of various physical and chemical factors (including the relative concentration of surfactant, dynamic surface tension, surface coverage, surface elasticity, surface mobility, aggregate morphology, etc.) on the expansion ratio and bubble size were analysed to identify which “universal” parameters can explain the phenomenon for all aqueous solutions in the gas–liquid separation process. Research has shown that the morphology of aggregates in a solution largely determines the surface properties of the solution at 1.5 ms (surface tension, surface coverage, surface elasticity, and so on). These surface properties significantly affect the expansion ratio. However, no good correlation was found between bubble size and these surface properties because surfactant vesicles can directly affect bubble size. In addition, the liquid flow rate and gas–liquid ratio have a significant impact on the expansion ratio and bubble size. Ultimately, we found that the foam stability, bubble size, and expansion ration can be described by a simple linear relationship. Our research provides new opinions for further understanding the effects of bulk/interfacial properties and hydrodynamic conditions on the physical properties of bubbles in the gas–liquid separation process.
期刊介绍:
Separation and Purification Technology is a premier journal committed to sharing innovative methods for separation and purification in chemical and environmental engineering, encompassing both homogeneous solutions and heterogeneous mixtures. Our scope includes the separation and/or purification of liquids, vapors, and gases, as well as carbon capture and separation techniques. However, it's important to note that methods solely intended for analytical purposes are not within the scope of the journal. Additionally, disciplines such as soil science, polymer science, and metallurgy fall outside the purview of Separation and Purification Technology. Join us in advancing the field of separation and purification methods for sustainable solutions in chemical and environmental engineering.