Electron beam induced graft polymerized anti oil-fouling biaxial polypropylene membrane with harsh environment tolerance

The intrinsic hydrophobic behavior of biaxial-oriented polypropylene microporous membrane limits its broad application area by leading serious membrane fouling. An environment-friendly, practical, and facile to large-scale prepared surface modification process is designed to enhance the membrane wettability and oil-fouling. By employing electron beam radiation, acrylic acid, and polyvinyl alcohol in the pre-irradiation-induced graft polymerization process, a micro-nano structure was developed and the surface roughness was increased from 66.5 nm to 99.3 nm. Enhancing the grafting ratio further reduces the pore size of the final modified membrane from 54 nm to 25 nm, which is significantly smaller than the size of the emulsified oil droplet. By modifying the morphological and structural characteristics of the grafted membrane, excellent oil-fouling resistance features are attained with UWOCA value 161° and separation efficiency of 99.3 %. Moreover, the theoretical explanations for hydrophilicity and oil-fouling resistance of modified membranes are also developed using DFT calculations and the Hermia model, which shows alignment with experimental data. Consequently, considerable improvements in wettability, thermal and mechanical behavior are obtained by this facial surface modification approach, which could further broaden the modified membrane's applications area in membrane separation technology while lengthening its service life.