{"title":"用于运动监测的基于负泊松比结构压阻传感器的无支撑打印折纸三维技术","authors":"","doi":"10.1016/j.coco.2024.102078","DOIUrl":null,"url":null,"abstract":"<div><p>A convenient strategy for preparing meta-structures with a negative Poisson's ratio (NPR), which enhance mechanoelectrical responsiveness and are typically based on inner concave hollow cells, is 3D printing without support structures. However, this process requires the material to have high melt strength, often linked to high viscosity and low printability. In this work, we introduced 0D carbon black (CB) into a thermoplastic polyurethane (TPU)/1D carbon nanotubes (CNT) composite to create a dimension-hybrid filler system, enhancing strength with minimal viscosity increase. The results show that the bending modulus and Young's modulus of CB/CNT(1:3)/TPU composites are increased by 1.6 times and 1.8 times that of TPU, while its viscosity (2697.98 Pa⋅s) is lower than the allowed value of printer. Then, the 3D-printed suspension bridge of TPU is 42.7 % less saggy, significantly benefiting to preparing meta-structures. Based on a support-free 3D printable enclosed hollow structure, the TPU / CNT / CB composite material achieves an adjustable NPR between −0.59 and −0.20. Compared to unfolded structure, this NPR characteristic further improves the piezoelectric output voltage by 9.00 times, enhances the compressive modulus by 3.15 times, and improves the piezoresistive sensitivity by 122.0 %. Sensors based on this 3D-printed material showcase high performance stability and reproducibility, demonstrating their potential in wearable equipment.</p></div>","PeriodicalId":10533,"journal":{"name":"Composites Communications","volume":null,"pages":null},"PeriodicalIF":6.5000,"publicationDate":"2024-09-11","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Support-free printing origami-based 3D negative Poisson's ratio-structured piezoresistive sensor for motion monitoring\",\"authors\":\"\",\"doi\":\"10.1016/j.coco.2024.102078\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>A convenient strategy for preparing meta-structures with a negative Poisson's ratio (NPR), which enhance mechanoelectrical responsiveness and are typically based on inner concave hollow cells, is 3D printing without support structures. However, this process requires the material to have high melt strength, often linked to high viscosity and low printability. In this work, we introduced 0D carbon black (CB) into a thermoplastic polyurethane (TPU)/1D carbon nanotubes (CNT) composite to create a dimension-hybrid filler system, enhancing strength with minimal viscosity increase. The results show that the bending modulus and Young's modulus of CB/CNT(1:3)/TPU composites are increased by 1.6 times and 1.8 times that of TPU, while its viscosity (2697.98 Pa⋅s) is lower than the allowed value of printer. Then, the 3D-printed suspension bridge of TPU is 42.7 % less saggy, significantly benefiting to preparing meta-structures. Based on a support-free 3D printable enclosed hollow structure, the TPU / CNT / CB composite material achieves an adjustable NPR between −0.59 and −0.20. Compared to unfolded structure, this NPR characteristic further improves the piezoelectric output voltage by 9.00 times, enhances the compressive modulus by 3.15 times, and improves the piezoresistive sensitivity by 122.0 %. Sensors based on this 3D-printed material showcase high performance stability and reproducibility, demonstrating their potential in wearable equipment.</p></div>\",\"PeriodicalId\":10533,\"journal\":{\"name\":\"Composites Communications\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":6.5000,\"publicationDate\":\"2024-09-11\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Composites Communications\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S2452213924002699\",\"RegionNum\":2,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MATERIALS SCIENCE, COMPOSITES\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Composites Communications","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S2452213924002699","RegionNum":2,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MATERIALS SCIENCE, COMPOSITES","Score":null,"Total":0}
Support-free printing origami-based 3D negative Poisson's ratio-structured piezoresistive sensor for motion monitoring
A convenient strategy for preparing meta-structures with a negative Poisson's ratio (NPR), which enhance mechanoelectrical responsiveness and are typically based on inner concave hollow cells, is 3D printing without support structures. However, this process requires the material to have high melt strength, often linked to high viscosity and low printability. In this work, we introduced 0D carbon black (CB) into a thermoplastic polyurethane (TPU)/1D carbon nanotubes (CNT) composite to create a dimension-hybrid filler system, enhancing strength with minimal viscosity increase. The results show that the bending modulus and Young's modulus of CB/CNT(1:3)/TPU composites are increased by 1.6 times and 1.8 times that of TPU, while its viscosity (2697.98 Pa⋅s) is lower than the allowed value of printer. Then, the 3D-printed suspension bridge of TPU is 42.7 % less saggy, significantly benefiting to preparing meta-structures. Based on a support-free 3D printable enclosed hollow structure, the TPU / CNT / CB composite material achieves an adjustable NPR between −0.59 and −0.20. Compared to unfolded structure, this NPR characteristic further improves the piezoelectric output voltage by 9.00 times, enhances the compressive modulus by 3.15 times, and improves the piezoresistive sensitivity by 122.0 %. Sensors based on this 3D-printed material showcase high performance stability and reproducibility, demonstrating their potential in wearable equipment.
期刊介绍:
Composites Communications (Compos. Commun.) is a peer-reviewed journal publishing short communications and letters on the latest advances in composites science and technology. With a rapid review and publication process, its goal is to disseminate new knowledge promptly within the composites community. The journal welcomes manuscripts presenting creative concepts and new findings in design, state-of-the-art approaches in processing, synthesis, characterization, and mechanics modeling. In addition to traditional fiber-/particulate-reinforced engineering composites, it encourages submissions on composites with exceptional physical, mechanical, and fracture properties, as well as those with unique functions and significant application potential. This includes biomimetic and bio-inspired composites for biomedical applications, functional nano-composites for thermal management and energy applications, and composites designed for extreme service environments.