{"title":"不同显微组织对峰值时效 Mg-14Gd-0.2Sn 合金强化机制和硬化机制的影响","authors":"Boshu Liu, Kaiqiang Cao, Rongguang Li, Yuehong Zhang, Hang Zhang, Shanshan Li, Sha Sha","doi":"10.1007/s12540-024-01792-9","DOIUrl":null,"url":null,"abstract":"<p>A bimodal-grained microstructure is formed in the Mg–14Gd–0.2Sn alloy extruded with a small extrusion ratio of 7 (E7 alloy), containing a large number of fine dynamic recrystallized (DRXed) grains with an average size of ~ 1.11 μm. In comparison, a much higher proportion of DRXed microstructure (~ 90%) with a coarser grain size of ~ 5.85 μm is formed in the alloy extruded with a large ratio of 16 (E16 alloy). The lower actual temperature during extrusion of the E7 alloy increases the supersaturation degree of α-Mg solid solution matrix, and induces a higher volume fraction of dynamic precipitates (β-Mg<sub>5</sub>Gd) compared with the E16 alloy. After aging, the E7-A alloy exhibits a stronger precipitation strengthening effect with a peak-aged yield strength (YS) of 405 MPa. The YS of the E7-A alloy presents a remarkable improvement of 88 MPa compared with that of the E16-A alloy, which is mainly related to finer DRXed grains and stronger texture. In contrast, the hardness increment of the E16-A alloy is higher than that of the E7-A alloy, and the peak hardness of the E16-A alloy is comparable to that of the E7-A alloy. Although the high density of precipitates in the E16-A alloy contributes to a strong aging hardening response, the weaker precipitation strengthening effect of the E16-A alloy is mainly attributed to the activation of twinning in coarser grains with a weaker texture.</p><h3 data-test=\"abstract-sub-heading\">Graphical Abstract</h3>\n","PeriodicalId":703,"journal":{"name":"Metals and Materials International","volume":"44 1","pages":""},"PeriodicalIF":3.3000,"publicationDate":"2024-08-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effects of Different Microstructure on Strengthening Mechanism and Hardening Mechanism in Peak-Aged Mg–14Gd–0.2Sn Alloy\",\"authors\":\"Boshu Liu, Kaiqiang Cao, Rongguang Li, Yuehong Zhang, Hang Zhang, Shanshan Li, Sha Sha\",\"doi\":\"10.1007/s12540-024-01792-9\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>A bimodal-grained microstructure is formed in the Mg–14Gd–0.2Sn alloy extruded with a small extrusion ratio of 7 (E7 alloy), containing a large number of fine dynamic recrystallized (DRXed) grains with an average size of ~ 1.11 μm. In comparison, a much higher proportion of DRXed microstructure (~ 90%) with a coarser grain size of ~ 5.85 μm is formed in the alloy extruded with a large ratio of 16 (E16 alloy). The lower actual temperature during extrusion of the E7 alloy increases the supersaturation degree of α-Mg solid solution matrix, and induces a higher volume fraction of dynamic precipitates (β-Mg<sub>5</sub>Gd) compared with the E16 alloy. After aging, the E7-A alloy exhibits a stronger precipitation strengthening effect with a peak-aged yield strength (YS) of 405 MPa. The YS of the E7-A alloy presents a remarkable improvement of 88 MPa compared with that of the E16-A alloy, which is mainly related to finer DRXed grains and stronger texture. In contrast, the hardness increment of the E16-A alloy is higher than that of the E7-A alloy, and the peak hardness of the E16-A alloy is comparable to that of the E7-A alloy. Although the high density of precipitates in the E16-A alloy contributes to a strong aging hardening response, the weaker precipitation strengthening effect of the E16-A alloy is mainly attributed to the activation of twinning in coarser grains with a weaker texture.</p><h3 data-test=\\\"abstract-sub-heading\\\">Graphical Abstract</h3>\\n\",\"PeriodicalId\":703,\"journal\":{\"name\":\"Metals and Materials International\",\"volume\":\"44 1\",\"pages\":\"\"},\"PeriodicalIF\":3.3000,\"publicationDate\":\"2024-08-30\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Metals and Materials International\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1007/s12540-024-01792-9\",\"RegionNum\":3,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Metals and Materials International","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s12540-024-01792-9","RegionNum":3,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Effects of Different Microstructure on Strengthening Mechanism and Hardening Mechanism in Peak-Aged Mg–14Gd–0.2Sn Alloy
A bimodal-grained microstructure is formed in the Mg–14Gd–0.2Sn alloy extruded with a small extrusion ratio of 7 (E7 alloy), containing a large number of fine dynamic recrystallized (DRXed) grains with an average size of ~ 1.11 μm. In comparison, a much higher proportion of DRXed microstructure (~ 90%) with a coarser grain size of ~ 5.85 μm is formed in the alloy extruded with a large ratio of 16 (E16 alloy). The lower actual temperature during extrusion of the E7 alloy increases the supersaturation degree of α-Mg solid solution matrix, and induces a higher volume fraction of dynamic precipitates (β-Mg5Gd) compared with the E16 alloy. After aging, the E7-A alloy exhibits a stronger precipitation strengthening effect with a peak-aged yield strength (YS) of 405 MPa. The YS of the E7-A alloy presents a remarkable improvement of 88 MPa compared with that of the E16-A alloy, which is mainly related to finer DRXed grains and stronger texture. In contrast, the hardness increment of the E16-A alloy is higher than that of the E7-A alloy, and the peak hardness of the E16-A alloy is comparable to that of the E7-A alloy. Although the high density of precipitates in the E16-A alloy contributes to a strong aging hardening response, the weaker precipitation strengthening effect of the E16-A alloy is mainly attributed to the activation of twinning in coarser grains with a weaker texture.
期刊介绍：
Metals and Materials International publishes original papers and occasional critical reviews on all aspects of research and technology in materials engineering: physical metallurgy, materials science, and processing of metals and other materials. Emphasis is placed on those aspects of the science of materials that are concerned with the relationships among the processing, structure and properties (mechanical, chemical, electrical, electrochemical, magnetic and optical) of materials. Aspects of processing include the melting, casting, and fabrication with the thermodynamics, kinetics and modeling.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
