Huai Zhang, Chengbin Shi, Shizhou Wang, Peng Lan, Jing Li
{"title":"铝钛比对 15Cr-30Ni-Fe 耐热合金热变形特性和显微组织演变的影响","authors":"Huai Zhang, Chengbin Shi, Shizhou Wang, Peng Lan, Jing Li","doi":"10.1007/s11665-024-10023-6","DOIUrl":null,"url":null,"abstract":"<p>The hot deformation behavior, microstructure evolution and dynamic recrystallization mechanism of the newly designed 15Cr-30Ni-Fe heat-resistant alloy were studied. The flow curves of the alloy exhibit obvious dynamic recrystallization characteristics of a single stress peak, and the increase in Al/Ti ratio enhances the deformation resistance of the alloy during hot working. The constitutive equation corrected by strain compensation was established. The processing map of the alloy was constructed based on the dynamic material model, and the accuracy of the processing map was confirmed by checking the evolution of the microstructure. With the increase in Al/Ti ratio, the optimum hot working window of the alloys at a strain of 0.9 is broadened from 1050-1150 °C/0.01-0.1 s<sup>−1</sup> to 1015-1150 °C/0.01-0.57 s<sup>−1</sup>. The strain-induced precipitation of nano-sized Laves phase, (Ti,Nb)C and <i>γ</i>'-Ni<sub>3</sub>(Ti, Al, Nb) pinning the movement of dislocations and grain boundaries in the alloy with a high Al/Ti ratio hinders the growth of DRX grains. The dynamic recrystallization mechanism in 15Cr-30Ni-Fe heat-resistant alloy is mainly discontinuous dynamic recrystallization (DDRX) with grain boundary bulge, supplemented by continuous dynamic recrystallization (CDRX) with sub-grain nucleation.</p>","PeriodicalId":644,"journal":{"name":"Journal of Materials Engineering and Performance","volume":"87 1","pages":""},"PeriodicalIF":2.2000,"publicationDate":"2024-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Effect of Al/Ti Ratio on Hot Deformation Characteristics and Microstructure Evolution of 15Cr-30Ni-Fe Heat-Resistant Alloy\",\"authors\":\"Huai Zhang, Chengbin Shi, Shizhou Wang, Peng Lan, Jing Li\",\"doi\":\"10.1007/s11665-024-10023-6\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<p>The hot deformation behavior, microstructure evolution and dynamic recrystallization mechanism of the newly designed 15Cr-30Ni-Fe heat-resistant alloy were studied. The flow curves of the alloy exhibit obvious dynamic recrystallization characteristics of a single stress peak, and the increase in Al/Ti ratio enhances the deformation resistance of the alloy during hot working. The constitutive equation corrected by strain compensation was established. The processing map of the alloy was constructed based on the dynamic material model, and the accuracy of the processing map was confirmed by checking the evolution of the microstructure. With the increase in Al/Ti ratio, the optimum hot working window of the alloys at a strain of 0.9 is broadened from 1050-1150 °C/0.01-0.1 s<sup>−1</sup> to 1015-1150 °C/0.01-0.57 s<sup>−1</sup>. The strain-induced precipitation of nano-sized Laves phase, (Ti,Nb)C and <i>γ</i>'-Ni<sub>3</sub>(Ti, Al, Nb) pinning the movement of dislocations and grain boundaries in the alloy with a high Al/Ti ratio hinders the growth of DRX grains. The dynamic recrystallization mechanism in 15Cr-30Ni-Fe heat-resistant alloy is mainly discontinuous dynamic recrystallization (DDRX) with grain boundary bulge, supplemented by continuous dynamic recrystallization (CDRX) with sub-grain nucleation.</p>\",\"PeriodicalId\":644,\"journal\":{\"name\":\"Journal of Materials Engineering and Performance\",\"volume\":\"87 1\",\"pages\":\"\"},\"PeriodicalIF\":2.2000,\"publicationDate\":\"2024-09-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Journal of Materials Engineering and Performance\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://doi.org/10.1007/s11665-024-10023-6\",\"RegionNum\":4,\"RegionCategory\":\"材料科学\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"MATERIALS SCIENCE, MULTIDISCIPLINARY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Materials Engineering and Performance","FirstCategoryId":"88","ListUrlMain":"https://doi.org/10.1007/s11665-024-10023-6","RegionNum":4,"RegionCategory":"材料科学","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"MATERIALS SCIENCE, MULTIDISCIPLINARY","Score":null,"Total":0}
Effect of Al/Ti Ratio on Hot Deformation Characteristics and Microstructure Evolution of 15Cr-30Ni-Fe Heat-Resistant Alloy
The hot deformation behavior, microstructure evolution and dynamic recrystallization mechanism of the newly designed 15Cr-30Ni-Fe heat-resistant alloy were studied. The flow curves of the alloy exhibit obvious dynamic recrystallization characteristics of a single stress peak, and the increase in Al/Ti ratio enhances the deformation resistance of the alloy during hot working. The constitutive equation corrected by strain compensation was established. The processing map of the alloy was constructed based on the dynamic material model, and the accuracy of the processing map was confirmed by checking the evolution of the microstructure. With the increase in Al/Ti ratio, the optimum hot working window of the alloys at a strain of 0.9 is broadened from 1050-1150 °C/0.01-0.1 s−1 to 1015-1150 °C/0.01-0.57 s−1. The strain-induced precipitation of nano-sized Laves phase, (Ti,Nb)C and γ'-Ni3(Ti, Al, Nb) pinning the movement of dislocations and grain boundaries in the alloy with a high Al/Ti ratio hinders the growth of DRX grains. The dynamic recrystallization mechanism in 15Cr-30Ni-Fe heat-resistant alloy is mainly discontinuous dynamic recrystallization (DDRX) with grain boundary bulge, supplemented by continuous dynamic recrystallization (CDRX) with sub-grain nucleation.
期刊介绍：
ASM International''s Journal of Materials Engineering and Performance focuses on solving day-to-day engineering challenges, particularly those involving components for larger systems. The journal presents a clear understanding of relationships between materials selection, processing, applications and performance.
The Journal of Materials Engineering covers all aspects of materials selection, design, processing, characterization and evaluation, including how to improve materials properties through processes and process control of casting, forming, heat treating, surface modification and coating, and fabrication.
Testing and characterization (including mechanical and physical tests, NDE, metallography, failure analysis, corrosion resistance, chemical analysis, surface characterization, and microanalysis of surfaces, features and fractures), and industrial performance measurement are also covered
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
