Yajie Wang , Chang Liu , Lunxiang Yin, Yaru Liu, Peiwen Jiang, Yanqin Li
{"title":"基于 TPA-DPP 的扩展 π 共轭 SMD:光伏性能的中央核心调节","authors":"Yajie Wang , Chang Liu , Lunxiang Yin, Yaru Liu, Peiwen Jiang, Yanqin Li","doi":"10.1016/j.dyepig.2024.112434","DOIUrl":null,"url":null,"abstract":"<div><p>Small molecule donors (SMDs) have made great progress in the field of organic semiconductor materials due to their unique characteristics. The extended π-conjugation SMDs system combines the advantages of wide absorption and effective carrier mobility. However, the new structure of active layer material and the power conversion efficiency (PCE) of bulk-heterojunction (BHJ) organic solar cells (OSCs) are critical issues. Herein, a series of new SMDs, <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-CZ</strong>, <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PTZ</strong> and <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PhFLU</strong>, were constructed based on an extended D-A-D′-A-D structural skeleton using triphenylamine-diketopyrrolopyrrole (TPA-DPP) as the terminal electron-donating group and π-bridge electron-withdrawing linker. The strong push-pull effect of TPA-DPP leads to wide and strong light absorption, which is one of the reasons for the high short-circuit current density (<em>J</em><sub>SC</sub>) of bulk heterojunction organic solar cells (OSCs). Furthermore, taking carbazole (CZ), phenothiazine (PTZ), and alkoxyphenyl substituted fluorene (PhFLU) as the central D′ units respectively, the effects of structural control strategies on the photovoltaic properties of the materials were discussed. It should be emphasized here that the introduction of alkoxyphenyl groups into the central core generates significant push-pull effects, promotes intermolecular charge transfer (ICT) processes, reduces energy loss, and facilitates charge transport in photovoltaic devices. As a result, the compounds <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-CZ</strong>, <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PTZ</strong> and <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PhFLU</strong> show high molar extinction coefficients ranging from 1.12 × 10<sup>5</sup> M<sup>−1</sup> cm<sup>−1</sup> to 1.68 × 10<sup>5</sup> M<sup>−1</sup> cm<sup>−1</sup>, which is helpful for devices based on these materials to obtain high <em>J</em><sub>SC</sub>. Among the three compounds, <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PhFLU</strong> obtained the lowest HOMO<sup>CV</sup> energy level of −5.20 eV and the narrowest band gap of 1.65 eV, which will be conducive to the generation of high open circuit voltage (<em>V</em><sub>OC</sub>) and <em>J</em><sub>SC</sub>. The PCE of SMDs/PC<sub>71</sub>BM-based OSCs ranged from 4.66 % to 7.44 %. It is worth noting that the <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PhFLU/</strong>PC<sub>71</sub>BM-based device obtained the highest PCE of 7.44 % with a <em>V</em><sub>OC</sub> of 0.94 V, and a high <em>J</em><sub>SC</sub> of 19.71 mA cm<sup>−2</sup> without further optimization. The measured photocurrent and PCE of the device is one of the best performances for TPA-DPP-based SMDs available so far, which fills the gap of TPA-based long conjugated molecules in the field of organic photovoltaics. The better photovoltaic performance is attributed not only to the relatively weak electron-donating ability of the central core unit PhFLU of this molecule but also to the higher and more balanced carrier mobility of the device. This work demonstrates that the extended D-A-D′-A-D molecules based on the TPA-DPP skeleton are a type of promising photovoltaic material that can be used to improve <em>J</em><sub>SC</sub> and PCE by combining the regulation of the central core.</p></div>","PeriodicalId":302,"journal":{"name":"Dyes and Pigments","volume":"231 ","pages":"Article 112434"},"PeriodicalIF":4.1000,"publicationDate":"2024-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"TPA-DPP-based extended π-conjugated SMDs: Central core regulation on photovoltaic performance\",\"authors\":\"Yajie Wang , Chang Liu , Lunxiang Yin, Yaru Liu, Peiwen Jiang, Yanqin Li\",\"doi\":\"10.1016/j.dyepig.2024.112434\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Small molecule donors (SMDs) have made great progress in the field of organic semiconductor materials due to their unique characteristics. The extended π-conjugation SMDs system combines the advantages of wide absorption and effective carrier mobility. However, the new structure of active layer material and the power conversion efficiency (PCE) of bulk-heterojunction (BHJ) organic solar cells (OSCs) are critical issues. Herein, a series of new SMDs, <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-CZ</strong>, <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PTZ</strong> and <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PhFLU</strong>, were constructed based on an extended D-A-D′-A-D structural skeleton using triphenylamine-diketopyrrolopyrrole (TPA-DPP) as the terminal electron-donating group and π-bridge electron-withdrawing linker. The strong push-pull effect of TPA-DPP leads to wide and strong light absorption, which is one of the reasons for the high short-circuit current density (<em>J</em><sub>SC</sub>) of bulk heterojunction organic solar cells (OSCs). Furthermore, taking carbazole (CZ), phenothiazine (PTZ), and alkoxyphenyl substituted fluorene (PhFLU) as the central D′ units respectively, the effects of structural control strategies on the photovoltaic properties of the materials were discussed. It should be emphasized here that the introduction of alkoxyphenyl groups into the central core generates significant push-pull effects, promotes intermolecular charge transfer (ICT) processes, reduces energy loss, and facilitates charge transport in photovoltaic devices. As a result, the compounds <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-CZ</strong>, <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PTZ</strong> and <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PhFLU</strong> show high molar extinction coefficients ranging from 1.12 × 10<sup>5</sup> M<sup>−1</sup> cm<sup>−1</sup> to 1.68 × 10<sup>5</sup> M<sup>−1</sup> cm<sup>−1</sup>, which is helpful for devices based on these materials to obtain high <em>J</em><sub>SC</sub>. Among the three compounds, <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PhFLU</strong> obtained the lowest HOMO<sup>CV</sup> energy level of −5.20 eV and the narrowest band gap of 1.65 eV, which will be conducive to the generation of high open circuit voltage (<em>V</em><sub>OC</sub>) and <em>J</em><sub>SC</sub>. The PCE of SMDs/PC<sub>71</sub>BM-based OSCs ranged from 4.66 % to 7.44 %. It is worth noting that the <strong>(TPA-DPP)</strong><sub><strong>2</strong></sub><strong>-PhFLU/</strong>PC<sub>71</sub>BM-based device obtained the highest PCE of 7.44 % with a <em>V</em><sub>OC</sub> of 0.94 V, and a high <em>J</em><sub>SC</sub> of 19.71 mA cm<sup>−2</sup> without further optimization. The measured photocurrent and PCE of the device is one of the best performances for TPA-DPP-based SMDs available so far, which fills the gap of TPA-based long conjugated molecules in the field of organic photovoltaics. The better photovoltaic performance is attributed not only to the relatively weak electron-donating ability of the central core unit PhFLU of this molecule but also to the higher and more balanced carrier mobility of the device. This work demonstrates that the extended D-A-D′-A-D molecules based on the TPA-DPP skeleton are a type of promising photovoltaic material that can be used to improve <em>J</em><sub>SC</sub> and PCE by combining the regulation of the central core.</p></div>\",\"PeriodicalId\":302,\"journal\":{\"name\":\"Dyes and Pigments\",\"volume\":\"231 \",\"pages\":\"Article 112434\"},\"PeriodicalIF\":4.1000,\"publicationDate\":\"2024-09-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Dyes and Pigments\",\"FirstCategoryId\":\"88\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S014372082400500X\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"CHEMISTRY, APPLIED\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Dyes and Pigments","FirstCategoryId":"88","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S014372082400500X","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"CHEMISTRY, APPLIED","Score":null,"Total":0}
TPA-DPP-based extended π-conjugated SMDs: Central core regulation on photovoltaic performance
Small molecule donors (SMDs) have made great progress in the field of organic semiconductor materials due to their unique characteristics. The extended π-conjugation SMDs system combines the advantages of wide absorption and effective carrier mobility. However, the new structure of active layer material and the power conversion efficiency (PCE) of bulk-heterojunction (BHJ) organic solar cells (OSCs) are critical issues. Herein, a series of new SMDs, (TPA-DPP)2-CZ, (TPA-DPP)2-PTZ and (TPA-DPP)2-PhFLU, were constructed based on an extended D-A-D′-A-D structural skeleton using triphenylamine-diketopyrrolopyrrole (TPA-DPP) as the terminal electron-donating group and π-bridge electron-withdrawing linker. The strong push-pull effect of TPA-DPP leads to wide and strong light absorption, which is one of the reasons for the high short-circuit current density (JSC) of bulk heterojunction organic solar cells (OSCs). Furthermore, taking carbazole (CZ), phenothiazine (PTZ), and alkoxyphenyl substituted fluorene (PhFLU) as the central D′ units respectively, the effects of structural control strategies on the photovoltaic properties of the materials were discussed. It should be emphasized here that the introduction of alkoxyphenyl groups into the central core generates significant push-pull effects, promotes intermolecular charge transfer (ICT) processes, reduces energy loss, and facilitates charge transport in photovoltaic devices. As a result, the compounds (TPA-DPP)2-CZ, (TPA-DPP)2-PTZ and (TPA-DPP)2-PhFLU show high molar extinction coefficients ranging from 1.12 × 105 M−1 cm−1 to 1.68 × 105 M−1 cm−1, which is helpful for devices based on these materials to obtain high JSC. Among the three compounds, (TPA-DPP)2-PhFLU obtained the lowest HOMOCV energy level of −5.20 eV and the narrowest band gap of 1.65 eV, which will be conducive to the generation of high open circuit voltage (VOC) and JSC. The PCE of SMDs/PC71BM-based OSCs ranged from 4.66 % to 7.44 %. It is worth noting that the (TPA-DPP)2-PhFLU/PC71BM-based device obtained the highest PCE of 7.44 % with a VOC of 0.94 V, and a high JSC of 19.71 mA cm−2 without further optimization. The measured photocurrent and PCE of the device is one of the best performances for TPA-DPP-based SMDs available so far, which fills the gap of TPA-based long conjugated molecules in the field of organic photovoltaics. The better photovoltaic performance is attributed not only to the relatively weak electron-donating ability of the central core unit PhFLU of this molecule but also to the higher and more balanced carrier mobility of the device. This work demonstrates that the extended D-A-D′-A-D molecules based on the TPA-DPP skeleton are a type of promising photovoltaic material that can be used to improve JSC and PCE by combining the regulation of the central core.
期刊介绍:
Dyes and Pigments covers the scientific and technical aspects of the chemistry and physics of dyes, pigments and their intermediates. Emphasis is placed on the properties of the colouring matters themselves rather than on their applications or the system in which they may be applied.
Thus the journal accepts research and review papers on the synthesis of dyes, pigments and intermediates, their physical or chemical properties, e.g. spectroscopic, surface, solution or solid state characteristics, the physical aspects of their preparation, e.g. precipitation, nucleation and growth, crystal formation, liquid crystalline characteristics, their photochemical, ecological or biological properties and the relationship between colour and chemical constitution. However, papers are considered which deal with the more fundamental aspects of colourant application and of the interactions of colourants with substrates or media.
The journal will interest a wide variety of workers in a range of disciplines whose work involves dyes, pigments and their intermediates, and provides a platform for investigators with common interests but diverse fields of activity such as cosmetics, reprographics, dye and pigment synthesis, medical research, polymers, etc.