{"title":"基于数字间结构 (IDS) 的微带线和射频电路组合的微波传感系统,用于提取液体样品的复介电常数","authors":"","doi":"10.1016/j.sna.2024.115860","DOIUrl":null,"url":null,"abstract":"<div><p>In this manuscript, a microwave sensing system for extracting complex permittivity of binary aqueous solutions based on a modified microstrip line with interdigital structure (IDS) etched is proposed. The passive resonance unit and active circuits constitute the microwave sensing system. The passive resonance unit is evolved from conventional microstrip line with the characteristic impedance of <span><math><mrow><mn>50</mn><mi>Ω</mi></mrow></math></span>, then the IDS is etched on the top surface of passive resonance unit to enhance the confinement of electrical field. The modified passive sensor can produce two resonant modes, i.e., odd-mode 1 and odd-mode 2, the electrical fields of these two modes are both concentrating at IDS, and odd-mode 1 with higher density of electrical field is adopted to retrieve complex permittivity of liquid samples. Except for the passive sensor, the sensing system consists of power divider, low noise amplifier (LNA), isolator, orthogonal hybrid coupler, phase shifter, mixer, and low-pass filter (LPF). The proposed microwave sensing system has two output DC voltages, i.e., channel-I and channel-Q. The mathematical relationship between complex permittivity and resonant frequency shift can be transformed into the relation between complex permittivity and two DC voltages by the proposed microwave sensing system, which is beneficial to discard the use of VNA. The two output voltages of microwave sensing system will be changed according to the injections of liquid samples with different complex permittivity, then the mathematical models can be established by summarizing the rule between complex permittivity and DC voltages. Finally, the established mathematical models can be adopted to predict the binary aqueous solutions with unknown complex permittivity. In measurement, the proposed microwave sensing system has the average sensitivities of about 2.478 mV/<span><math><msubsup><mrow><mi>ε</mi></mrow><mrow><mi>r</mi></mrow><mrow><mo>′</mo></mrow></msubsup></math></span> and 1.418 mV/<span><math><msubsup><mrow><mi>ε</mi></mrow><mrow><mi>r</mi></mrow><mrow><mo>′</mo></mrow></msubsup></math></span> for channel-I and channel-Q, respectively, which are several times higher than other reported ones. Low-cost, high sensitivity, convenient measurement, and easy fabrication are the merits for the proposed sensing system, and it is a good template in the region of detecting liquid samples.</p></div>","PeriodicalId":21689,"journal":{"name":"Sensors and Actuators A-physical","volume":null,"pages":null},"PeriodicalIF":4.1000,"publicationDate":"2024-09-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"A microwave sensing system combination of interdigital structure (IDS)-based microstrip line and RF circuits for extracting complex permittivity of liquid samples\",\"authors\":\"\",\"doi\":\"10.1016/j.sna.2024.115860\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>In this manuscript, a microwave sensing system for extracting complex permittivity of binary aqueous solutions based on a modified microstrip line with interdigital structure (IDS) etched is proposed. The passive resonance unit and active circuits constitute the microwave sensing system. The passive resonance unit is evolved from conventional microstrip line with the characteristic impedance of <span><math><mrow><mn>50</mn><mi>Ω</mi></mrow></math></span>, then the IDS is etched on the top surface of passive resonance unit to enhance the confinement of electrical field. The modified passive sensor can produce two resonant modes, i.e., odd-mode 1 and odd-mode 2, the electrical fields of these two modes are both concentrating at IDS, and odd-mode 1 with higher density of electrical field is adopted to retrieve complex permittivity of liquid samples. Except for the passive sensor, the sensing system consists of power divider, low noise amplifier (LNA), isolator, orthogonal hybrid coupler, phase shifter, mixer, and low-pass filter (LPF). The proposed microwave sensing system has two output DC voltages, i.e., channel-I and channel-Q. The mathematical relationship between complex permittivity and resonant frequency shift can be transformed into the relation between complex permittivity and two DC voltages by the proposed microwave sensing system, which is beneficial to discard the use of VNA. The two output voltages of microwave sensing system will be changed according to the injections of liquid samples with different complex permittivity, then the mathematical models can be established by summarizing the rule between complex permittivity and DC voltages. Finally, the established mathematical models can be adopted to predict the binary aqueous solutions with unknown complex permittivity. In measurement, the proposed microwave sensing system has the average sensitivities of about 2.478 mV/<span><math><msubsup><mrow><mi>ε</mi></mrow><mrow><mi>r</mi></mrow><mrow><mo>′</mo></mrow></msubsup></math></span> and 1.418 mV/<span><math><msubsup><mrow><mi>ε</mi></mrow><mrow><mi>r</mi></mrow><mrow><mo>′</mo></mrow></msubsup></math></span> for channel-I and channel-Q, respectively, which are several times higher than other reported ones. Low-cost, high sensitivity, convenient measurement, and easy fabrication are the merits for the proposed sensing system, and it is a good template in the region of detecting liquid samples.</p></div>\",\"PeriodicalId\":21689,\"journal\":{\"name\":\"Sensors and Actuators A-physical\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":4.1000,\"publicationDate\":\"2024-09-03\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Sensors and Actuators A-physical\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0924424724008549\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q2\",\"JCRName\":\"ENGINEERING, ELECTRICAL & ELECTRONIC\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Sensors and Actuators A-physical","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0924424724008549","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q2","JCRName":"ENGINEERING, ELECTRICAL & ELECTRONIC","Score":null,"Total":0}
A microwave sensing system combination of interdigital structure (IDS)-based microstrip line and RF circuits for extracting complex permittivity of liquid samples
In this manuscript, a microwave sensing system for extracting complex permittivity of binary aqueous solutions based on a modified microstrip line with interdigital structure (IDS) etched is proposed. The passive resonance unit and active circuits constitute the microwave sensing system. The passive resonance unit is evolved from conventional microstrip line with the characteristic impedance of , then the IDS is etched on the top surface of passive resonance unit to enhance the confinement of electrical field. The modified passive sensor can produce two resonant modes, i.e., odd-mode 1 and odd-mode 2, the electrical fields of these two modes are both concentrating at IDS, and odd-mode 1 with higher density of electrical field is adopted to retrieve complex permittivity of liquid samples. Except for the passive sensor, the sensing system consists of power divider, low noise amplifier (LNA), isolator, orthogonal hybrid coupler, phase shifter, mixer, and low-pass filter (LPF). The proposed microwave sensing system has two output DC voltages, i.e., channel-I and channel-Q. The mathematical relationship between complex permittivity and resonant frequency shift can be transformed into the relation between complex permittivity and two DC voltages by the proposed microwave sensing system, which is beneficial to discard the use of VNA. The two output voltages of microwave sensing system will be changed according to the injections of liquid samples with different complex permittivity, then the mathematical models can be established by summarizing the rule between complex permittivity and DC voltages. Finally, the established mathematical models can be adopted to predict the binary aqueous solutions with unknown complex permittivity. In measurement, the proposed microwave sensing system has the average sensitivities of about 2.478 mV/ and 1.418 mV/ for channel-I and channel-Q, respectively, which are several times higher than other reported ones. Low-cost, high sensitivity, convenient measurement, and easy fabrication are the merits for the proposed sensing system, and it is a good template in the region of detecting liquid samples.
期刊介绍:
Sensors and Actuators A: Physical brings together multidisciplinary interests in one journal entirely devoted to disseminating information on all aspects of research and development of solid-state devices for transducing physical signals. Sensors and Actuators A: Physical regularly publishes original papers, letters to the Editors and from time to time invited review articles within the following device areas:
• Fundamentals and Physics, such as: classification of effects, physical effects, measurement theory, modelling of sensors, measurement standards, measurement errors, units and constants, time and frequency measurement. Modeling papers should bring new modeling techniques to the field and be supported by experimental results.
• Materials and their Processing, such as: piezoelectric materials, polymers, metal oxides, III-V and II-VI semiconductors, thick and thin films, optical glass fibres, amorphous, polycrystalline and monocrystalline silicon.
• Optoelectronic sensors, such as: photovoltaic diodes, photoconductors, photodiodes, phototransistors, positron-sensitive photodetectors, optoisolators, photodiode arrays, charge-coupled devices, light-emitting diodes, injection lasers and liquid-crystal displays.
• Mechanical sensors, such as: metallic, thin-film and semiconductor strain gauges, diffused silicon pressure sensors, silicon accelerometers, solid-state displacement transducers, piezo junction devices, piezoelectric field-effect transducers (PiFETs), tunnel-diode strain sensors, surface acoustic wave devices, silicon micromechanical switches, solid-state flow meters and electronic flow controllers.
Etc...