Guangjun Xing , Quanying Zhang , Lili Tian , Guobin Liu , Nan Wu , Tian Xie
{"title":"提高碳/氧测井反应灵敏度的碳/氧计算方法。","authors":"Guangjun Xing , Quanying Zhang , Lili Tian , Guobin Liu , Nan Wu , Tian Xie","doi":"10.1016/j.apradiso.2024.111499","DOIUrl":null,"url":null,"abstract":"<div><p>Carbon/Oxygen logging is an effective method to perform oil layer recognition and oil saturation calculation, which plays an important role in the evaluation of remaining oil after casing. At present, there are two main methods to calculate the ratio of carbon to oxygen (C/O). Compared with the energy window count method, the element yield method can avoid the influence of background count in the gamma spectrum and calculated carbon/oxygen value has the higher sensitivity and better accuracy, but it is still greatly affected by carbon and oxygen elements in the formation skeleton. Therefore, a new carbon/oxygen calculation method is proposed in this paper to overcome the influence of formation skeleton and improve the response sensitivity of Carbon/Oxygen logging. Based on Monte Carlo method, the inelastic gamma spectrum of pure sandstone and pure limestone skeletons are obtained. Based on spectrum analysis technology, the ratio relationship of carbon, oxygen yield and skeleton mark element (Si, Ca) yield in two skeletons are obtained. Using these ratio relationships, the carbon and oxygen yields from the sandstone and limestone reservoir skeletons are deducted from the total carbon and oxygen yield. A new carbon/oxygen parameter called the residual carbon/oxygen value (C/O)<sub>R</sub> is calculated to perform oil-water recognition and a set of oil saturation calculation model suitable for the residual carbon/oxygen value is proposed. The environment application of the residual carbon/oxygen value is also analyzed. The study shows that the residual carbon/oxygen value has higher sensitivity than original carbon/oxygen value in oil layer recognition and has a great accuracy in oil saturation calculation. In environment application aspect, the residual carbon/oxygen value is basically unaffected by formation water salinity and is affected by wellbore fluid and wellbore size obviously. This new carbon/oxygen value calculation method has an important significance to improve the application effect of Carbon/Oxygen logging.</p></div>","PeriodicalId":8096,"journal":{"name":"Applied Radiation and Isotopes","volume":"213 ","pages":"Article 111499"},"PeriodicalIF":1.6000,"publicationDate":"2024-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"A carbon/oxygen calculation method to improve the response sensitivity of carbon/oxygen logging\",\"authors\":\"Guangjun Xing , Quanying Zhang , Lili Tian , Guobin Liu , Nan Wu , Tian Xie\",\"doi\":\"10.1016/j.apradiso.2024.111499\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"<div><p>Carbon/Oxygen logging is an effective method to perform oil layer recognition and oil saturation calculation, which plays an important role in the evaluation of remaining oil after casing. At present, there are two main methods to calculate the ratio of carbon to oxygen (C/O). Compared with the energy window count method, the element yield method can avoid the influence of background count in the gamma spectrum and calculated carbon/oxygen value has the higher sensitivity and better accuracy, but it is still greatly affected by carbon and oxygen elements in the formation skeleton. Therefore, a new carbon/oxygen calculation method is proposed in this paper to overcome the influence of formation skeleton and improve the response sensitivity of Carbon/Oxygen logging. Based on Monte Carlo method, the inelastic gamma spectrum of pure sandstone and pure limestone skeletons are obtained. Based on spectrum analysis technology, the ratio relationship of carbon, oxygen yield and skeleton mark element (Si, Ca) yield in two skeletons are obtained. Using these ratio relationships, the carbon and oxygen yields from the sandstone and limestone reservoir skeletons are deducted from the total carbon and oxygen yield. A new carbon/oxygen parameter called the residual carbon/oxygen value (C/O)<sub>R</sub> is calculated to perform oil-water recognition and a set of oil saturation calculation model suitable for the residual carbon/oxygen value is proposed. The environment application of the residual carbon/oxygen value is also analyzed. The study shows that the residual carbon/oxygen value has higher sensitivity than original carbon/oxygen value in oil layer recognition and has a great accuracy in oil saturation calculation. In environment application aspect, the residual carbon/oxygen value is basically unaffected by formation water salinity and is affected by wellbore fluid and wellbore size obviously. This new carbon/oxygen value calculation method has an important significance to improve the application effect of Carbon/Oxygen logging.</p></div>\",\"PeriodicalId\":8096,\"journal\":{\"name\":\"Applied Radiation and Isotopes\",\"volume\":\"213 \",\"pages\":\"Article 111499\"},\"PeriodicalIF\":1.6000,\"publicationDate\":\"2024-09-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Applied Radiation and Isotopes\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://www.sciencedirect.com/science/article/pii/S0969804324003270\",\"RegionNum\":3,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q3\",\"JCRName\":\"CHEMISTRY, INORGANIC & NUCLEAR\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Radiation and Isotopes","FirstCategoryId":"5","ListUrlMain":"https://www.sciencedirect.com/science/article/pii/S0969804324003270","RegionNum":3,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q3","JCRName":"CHEMISTRY, INORGANIC & NUCLEAR","Score":null,"Total":0}
A carbon/oxygen calculation method to improve the response sensitivity of carbon/oxygen logging
Carbon/Oxygen logging is an effective method to perform oil layer recognition and oil saturation calculation, which plays an important role in the evaluation of remaining oil after casing. At present, there are two main methods to calculate the ratio of carbon to oxygen (C/O). Compared with the energy window count method, the element yield method can avoid the influence of background count in the gamma spectrum and calculated carbon/oxygen value has the higher sensitivity and better accuracy, but it is still greatly affected by carbon and oxygen elements in the formation skeleton. Therefore, a new carbon/oxygen calculation method is proposed in this paper to overcome the influence of formation skeleton and improve the response sensitivity of Carbon/Oxygen logging. Based on Monte Carlo method, the inelastic gamma spectrum of pure sandstone and pure limestone skeletons are obtained. Based on spectrum analysis technology, the ratio relationship of carbon, oxygen yield and skeleton mark element (Si, Ca) yield in two skeletons are obtained. Using these ratio relationships, the carbon and oxygen yields from the sandstone and limestone reservoir skeletons are deducted from the total carbon and oxygen yield. A new carbon/oxygen parameter called the residual carbon/oxygen value (C/O)R is calculated to perform oil-water recognition and a set of oil saturation calculation model suitable for the residual carbon/oxygen value is proposed. The environment application of the residual carbon/oxygen value is also analyzed. The study shows that the residual carbon/oxygen value has higher sensitivity than original carbon/oxygen value in oil layer recognition and has a great accuracy in oil saturation calculation. In environment application aspect, the residual carbon/oxygen value is basically unaffected by formation water salinity and is affected by wellbore fluid and wellbore size obviously. This new carbon/oxygen value calculation method has an important significance to improve the application effect of Carbon/Oxygen logging.
期刊介绍：
Applied Radiation and Isotopes provides a high quality medium for the publication of substantial, original and scientific and technological papers on the development and peaceful application of nuclear, radiation and radionuclide techniques in chemistry, physics, biochemistry, biology, medicine, security, engineering and in the earth, planetary and environmental sciences, all including dosimetry. Nuclear techniques are defined in the broadest sense and both experimental and theoretical papers are welcome. They include the development and use of α- and β-particles, X-rays and γ-rays, neutrons and other nuclear particles and radiations from all sources, including radionuclides, synchrotron sources, cyclotrons and reactors and from the natural environment.
The journal aims to publish papers with significance to an international audience, containing substantial novelty and scientific impact. The Editors reserve the rights to reject, with or without external review, papers that do not meet these criteria.
Papers dealing with radiation processing, i.e., where radiation is used to bring about a biological, chemical or physical change in a material, should be directed to our sister journal Radiation Physics and Chemistry.
求助内容：
应助结果提醒方式：
京公网安备 11010802042870号
