Variable stiffness performance analysis of layer jamming actuator based on bionic adhesive flaps.

Soft actuators made of soft materials cannot generate precisely efficient output forces compared to rigid actuators. It is a promising strategy to equip soft actuators with variable stiffness modules of layer jamming mechanism, which could increase their stiffness as needed. Inspired by the gecko's the array of setae, bionic adhesive flaps with inclined micropillars are applied in layer jamming mechanism. In this paper, after the manufacturing process of the layer jamming actuator based on the bionic adhesive flaps is described, the equivalent stiffness models of the whole actuator are established in the unjammed and jammed states. And the shear adhesive force of a single micropillar is calculated based on the Kendall viscoelastic band model. The finite element simulation results of two bionic adhesive flaps show that the interlaminar shear stress and stiffness increase with the increase of pressure. The measurement of shear adhesive force show that the critical shear adhesive force of the bionic adhesive material is 3.2 times that of polyethylene terephthalate (PET) material, and exhibit the ability of anisotropic adhesion behavior. The variable stiffness performance of the layer jamming actuator based on bionic adhesive flaps is evaluated by three test methods, and the max stiffness reaches 8.027 N mm^-1, which is 1.5 times higher than the stiffness of the layer jamming actuator based on the PET flaps. All results of simulation and experiment effectively verify the validity and superiority of applying the bionic adhesive flaps to the layer jamming mechanism to enhance the stiffness.